Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HA
– EEE-14 –
)"K
Capacitance (μF)
Series identification
Lot number
Negative polarity
marking (–)
Rated voltage Mark
Mark for Lead-Free
Products Black Dot
(Square)
A±0.2
W
( ) Reference size
0D±0.5
H
B±0.2
(I)
K
(P) (I)
L+
–
0.3 max.
Pressure Relief (010 and larger)
■ Features
● Endurance: 105 °C 1000 h
● Vibration-proof product is available upon request. (08 mm and larger)
● RoHS directive compliant
Surface Mount Type
Series: HA Type: V
HA High temperature Lead-Free re ow (suf x:A✽)
■ Speci cations
■ Di men sions in mm(not to scale) ■ Marking
Example: 6.3 V 22 μF
Marking color: BLACK
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 1 μF to 1500 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan dPlease see the attached High temperature lead-free refl ow products list.
Characteristics
at Low Temperature
W.V. (V) 6.3 10 16 25 35 50
(Impedance ratio at 120 Hz)Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2
Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3
Endurance
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan d< initial specifi ed value
DC leakage current < initial specifi ed value
S
HA
Hight-temperature
assuranceize
↑
Size
code D L A, B H I W P K
B 4.0 5.4
- 0.2 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
- 0.20
C 5.0 5.4
- 0.2 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.4
- 0.2 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
+ 0.1
+ 0.1
+ 0.1
+ 0.15
+ 0.15
+ 0.15
+ 0.15
+ 0.15
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
j 6.3 V
A 10 V
C 16 V
Rated Voltage Mark
E 25 V
V 35 V
H 50 V
(Unit : mm)
01 Sep. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HA
– EEE-15 –
■ High temperatre Lead-Free re ow products
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(120 Hz)
(+10 5°C)
tan d
(120 Hz)
(+20 °C)
Taping
(V) (μF) (mm) (mm)
(mA r.m.s.)
(pcs)
6.3
22 4 5.4 B 29 0.30 EEEHA0J220AR (5) 2000
33 4 5.4 (B) 29 0.35 EEEHAJ330WAR (5) 2000
47 5 5.4 C 46 0.30 EEEHA0J470AR (5) 1000
100 5 5.4 (C) 47 0.40 EEEHAJ101WAR (5) 1000
6.3 5.4 D 71 0.30 EEEHA0J101AP (5) 1000
330
6.3 7.7 D8 105 0.30 EEEHAJ331XAP (5) 900
86.2(E)1800.35EEEHAJ331UAP (7) 500
810.2 F2300.35EEEHA0J331AP (7) 500
470 8 10.2 (F) 300 0.35 EEEHAJ471UAP (7) 500
1000 10 10.2 G 400 0.35 EEEHA0J102AP (7) 500
1500 10 10.2 (G) 480 0.50 EEEHAJ152UAP (7) 500
10
22 4 5.4 (B) 28 0.30 EEEHAA220WAR (5) 2000
33 45.4(B)290.30EEEHAA330WAR (5) 2000
55.4C430.22EEEHA1A330AR (5) 1000
47 5 5.4 (C) 43 0.30 EEEHAA470WAR (5) 1000
100 6.3 5.4 (D) 71 0.30 EEEHAA101WAP (5) 1000
86.2E1100.26EEEHA1A101AP (7) 1000
220 6.3 7.7 D8 105 0.22 EEEHAA221XAP (5) 900
810.2 F1600.26EEEHA1A221AP (7) 500
470 810.2(F)2000.26EEEHAA471UAP (7) 500
10 10.2 G 270 0.26 EEEHA1A471AP (7) 500
1000 10 10.2 (G) 400 0.35 EEEHAA102UAP (7) 500
16
10 4 5.4 B 28 0.16 EEEHA1C100AR (5) 2000
22 45.4(B)280.26EEEHAC220WAR (5) 2000
55.4C390.16EEEHA1C220AR (5) 1000
33 5 5.4 (C) 35 0.26 EEEHAC330WAR (5) 1000
47 55.4(C)390.26EEEHAC470WAR (5) 1000
6.3 5.4 D 70 0.16 EEEHA1C470AP (5) 1000
100 6.3 5.4 (D) 70 0.26 EEEHAC101WAP (5) 1000
220
6.3 7.7 D8 105 0.20 EEEHAC221XAP (5) 900
810.2(F)1500.20EEEHAC221UAP (7) 500
10 10.2 G 210 0.20 EEEHA1C221AP (7) 500
330 810.2(F)1700.20EEEHAC331UAP (7) 500
10 10.2 G 230 0.20 EEEHA1C331AP (7) 500
470 810.2(F)3400.26EEEHAC471UAP (7) 500
10 10.2 G 340 0.20 EEEHA1C471AP (7) 500
680 10 10.2 (G) 380 0.26 EEEHAC681UAP (7) 500
✽ Size code( ):Miniaturization product
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J→J, 1A→A, 1C→C, 1E→E, 1V→V, 1 H →H
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Endurance : 105 °C 1000 h
01 Sep. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HA
– EEE-16 –
■ High temperatre Lead-Free re ow products
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(120 Hz)
(+10 5°C)
tan d
(120 Hz)
(+20 °C)
Taping
(V) (μF) (mm) (mm)
(mA r.m.s.)
(pcs)
25
4.7 4 5.4 B 22 0.14 EEEHA1E4R7AR (5) 2000
10 45.4(B)220.20EEEHAE100WAR (5) 2000
55.4C280.14EEEHA1E100AR (5) 1000
22 55.4(C)350.20EEEHAE220WAR (5) 1000
6.3 5.4 D 55 0.14 EEEHA1E220AP (5) 1000
33 55.4(C)450.20EEEHAE330WAR (5) 1000
6.3 5.4 D 65 0.14 EEEHA1E330AP (5) 1000
47 6.3 5.4 (D) 70 0.20 EEEHAE470WAP (5) 1000
86.2E910.16EEEHA1E470AP (7) 1000
100
86.2(E)910.16EEEHAE101UAP (7) 1000
6.3 7.7 D8 91 0.16 EEEHAE101XAP (5) 900
810.2 F1300.16EEEHA1E101AP (7) 500
220 810.2(F)1600.20EEEHAE221UAP (7) 500
10 10.2 G 190 0.16 EEEHA1E221AP (7) 500
330 810.2(F)1800.20EEEHAE331UAP (7) 500
10 10.2 G 340 0.16 EEEHA1E331AP (7) 500
470 10 10.2 (G) 360 0.25 EEEHAE471UAP (7) 500
35
4.7 4 5.4 B 22 0.12 EEEHA1V4R7AR (5) 2000
10 45.4(B)220.16EEEHAV100WAR (5) 2000
55.4C300.12EEEHA1V100AR (5) 1000
22 55.4(C)350.16EEEHAV220WAR (5) 1000
6.3 5.4 D 60 0.12 EEEHA1V220AP (5) 1000
33 6.3 5.4 (D) 42 0.16 EEEHAV330WAP (5) 1000
86.2E840.14EEEHA1V330AP (7) 1000
47 86.2(E)840.14EEEHAV470UAP (7) 1000
8 10.2 F 98 0.14 EEEHA1V470AP (7) 500
100
6.3 7.7 D8 84 0.14 EEEHAV101XAP (5) 900
810.2(F)1200.14EEEHAV101UAP (7) 500
10 10.2 G 160 0.14 EEEHA1V101AP (7) 500
220 810.2(F)1700.14EEEHAV221UAP (7) 500
10 10.2 G 210 0.14 EEEHA1V221AP (7) 500
330 10 10.2 (G) 250 0.30 EEEHAV331UAP (7) 500
50
0.1 4 5.4 B 1 0.12 EEEHA1HR10AR ✽✽✽ (5) 2000
0.22 4 5.4 B 2 0.12 EEEHA1HR22AR ✽✽✽ (5) 2000
0.33 4 5.4 B 3 0.12 EEEHA1HR33AR ✽✽✽ (5) 2000
0.47 4 5.4 B 5 0.12 EEEHA1HR47AR ✽✽✽ (5) 2000
1 4 5.4 B 10 0.12EEEHA1H1R0AR (5) 2000
2.2 4 5.4 B 16 0.12 EEEHA1H2R2AR (5) 2000
3.3 4 5.4 B 16 0.12 EEEHA1H3R3AR (5) 2000
4.7 5 5.4 C 23 0.12 EEEHA1H4R7AR (5) 1000
10 6.3 5.4 D 35 0.12 EEEHA1H100AP (5) 1000
22 8 6.2 E 70 0.12 EEEHA1H220AP (7) 1000
33
6.3 7.7 D8 70 0.14 EEEHAH330XAP (5) 900
86.2(E)700.12EEEHAH330UAP (7) 1000
8 10.2 F 91 0.12 EEEHA1H330AP (7) 500
47
6.3 7.7 D8 63 0.14 EEEHAH470XAP (5) 900
8 10.2 (F) 95 0.12 EEEHAH470UAP (7) 500
10 10.2 G 100 0.12 EEEHA1H470AP (7) 500
100 810.2(F)1100.18EEEHAH101UAP (7) 500
10 10.2 G 120 0.12 EEEHA1H101AP (7) 500
220 10 10.2 (G) 150 0.18 EEEHAH221UAP (7) 500
✽ Size code( ):Miniaturization product
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J→J, 1A→A, 1C→C, 1E→E, 1V→V, 1 H →H
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Endurance : 105 °C 1000 h
01 Sep. 2013
