KA317L
2
Absolute Maximum Ratings
Electrical Characteristics
(VI - VO = 5V, IO = 40mA, 0°C ≤ TJ ≤ +125°C, PDMAX = 625mW, unless otherwise specified)
Note:
1. Load and Line regulation are specified at constant junction temperature. Change in VO due to heating effects must be taken
into account separately. Pulse testing with low duty cycle is used.
Parameter Symbol Value Unit
Input-Output Voltage Differential VI - VO40 V
Power Dissipation PDInternally limited W
Operating Junction Temperature Range Tj0 ~ +125 °C
Storage Temperature Range TSTG -65 ~ +125 °C
Parameter Symbol Conditions Min. Typ. Max. Unit
Line Regulation (Note1) Rline TA = +25°C
3V ≤ VI − VO ≤ 40V - 0.01 0.04 %/V
3V ≤ VI − VO ≤ 40V - 0.02 0.07
Load Regulation (Note1) Rloal
TA = +25°C
10mA ≤ IO ≤ 100mA
VO ≤ 5V
VO ≥ 5V -
-5
0.1 25
0.5 mV
%/VO
10mA ≤ IO ≤ 100mA
VO ≤ 5V
VO ≥ 5V -
-20
0.3 70
1.5 mV
%/VO
Adjustment Pin Current IADJ -- 50 100 μA
Adjustment Pin Current Change ΔIADJ 3V ≤ VI - VO ≤ 40V
10mA ≤ IO ≤ 100mA
PD < PDMAX -0.25μA
Reference Voltage VREF 3V < VI - VO < 40V
10mA ≤ IO ≤ 100mA
PD ≤ PDMAX 1.20 1.25 1.30 V
Temperature Stability STT--0.7- %
Minimum Load Current to
Maintain Regulation IL(MIN) VI - VO = 40V - 3.5 10 mA
Maximum Output Current IO(MAX) VI - VO ≤ 15V, PD < PDMAX 100 200 - mA
VI - VO ≤ 40V
PD < PDMAX, TA = +25°C25 50 -
RMS Noise, % of VOUT eNTA = +25°C
10Hz < f < 10kHz - 0.003 - %/VO
Ripple Rejection RR VO = 10V, f = 120Hz
without CADJ
CADJ = 10uF -
66 65
80 -
-dB
dB
Long-Term Stability ST TJ = +125°C, 1000Hours - 0.3 - %