© 2000 National Semiconductor Corporation http://www.national.com
Printed in the U.S.A.
N
General Description
National Semiconductor offers several tools for the
evaluation of its high-speed data converters for wire-
less base stations. These tools include evaluation
boards, software and user guides. Listed in Table 1
below are the high-speed A/D and D/A converters
and associated evaluation boards that are available
from the Wireless Base Station group.
National also offers data acquisition hardware to
simplify evaluation of the high-speed A/D converters
and the Diversity Receiver Chip Set.
The Data Capture Board, CLC-CAPT-PCASM,
provides a means to easily collect and process data
from different evaluation boards when connected
to the user’s PC. The data capture board enables
simple evaluation of National Semiconductor’s High
Speed Analog to Digital Converters (ADCs) and
the Diversity Receiver Chip Set (DRCS). These
evaluation boards connect directly to the data
capture board. The data capture board interfaces
the outputs of these devices to the standard serial
port available on the back of most PCs. PC software
is provided with the Data Capture Board to control
the data capture function and Matlab
®
scripts are
also supplied for data analysis.
Interoperability Items
ADC and DRCS evaluation boards:
Many of the evaluation boards (i.e. ADCs and
DRCS) can be interfaced directly with the Data
Capture Board. The Data Capture Board uses
a “Dual Row 64 Position DIN Connector” for
interfacing with evaluation boards. Newer evaluation
boards use a “Four Row 96 Position and Four Row
24 Position Futurebus+ Connector” for interfacing
with data acquisition tools. In order for these boards
to interface with the Data Capture Board, an adapter
(i.e. ADC/DRCS to capture CLC730107) is used to
interface between the DIN connector on the Data
Capture Board and the Futurebus+ connector on
these new evaluation boards.
Figures 1 and 2 on page 2, are photos taken of the
connectors being used on the ADC and DRCS
evaluation boards as well as the Data Capture
Board. In Figure 1, the Data Capture Board with its
DIN connector is shown on the bottom of the photo
with an evaluation board that also has a DIN
connector shown at the top of the photo. In this
case, no adapter is required for the Data Capture
Board to interface with the evaluation board.
Wireless Base Station Evaluation Board
Interoperability Guide
October 2000
Wireless Base Station Evaluation Board
Interoperability Guide
Table 1: High-Speed A/D and D/A Converters and Evaluation Boards
A/D Converter and DRCS Products Evaluation Board ID
CLC952 12-bit, 41MSPS A/D Converter CLC952PCASM
CLC5956 12-bit, 65MSPS A/D Converter CLC5956PCASM
CLC5957 12-bit, 70MSPS A/D Converter CLC5957PCASM
CLC5958 14-bit, 52MSPS A/D Converter CLC5958PCASM
Diversity Receiver Chipset (DRCS) CLC-DRCS-PCASM*
CLC-DRCS7-PCASM
Data Capture Board CLC-CAPT-PCASM
*No longer available as of 10/01/00
D/A Converter Products Evaluation Board ID
DAC14135 14-bit, 135MSPS D/A Converter DAC14135PCASM
http://www.national.com
2
Figure 1: Data Capture Board and Evaluation Board with DIN Connectors
Figure 2: Data Capture Board with DIN Connector, Adapter Board,
and Evaluation Board with Futurebus+ Connector
In Figure 2, the Data Capture Board with its DIN connec-
tor is shown at the bottom of the photo. An evaluation
board with a Futurebus+ connector is shown at the top of
the photo. The required adapter board is shown between
the Data Capture Board and the evaluation board.
3
http://www.national.com
Figure 3: Extra DIN Connector with Solder Pins Showing that Must Be Removed
DAC evaluation boards:
There are no interoperability issues for the DAC14135.
Interoperability Matrix:
In Table 2 below, the required hardware necessary to use each evaluation board with the Data Capture Board is listed:
Table 2: Evaluation board interface matrix
REQUIRED HARDWARE
Evaluation
Boards
ADC/DRCS to
Capture CLC730107
Adapter Board
CLC-CAPT-PCASM
CLC952PCASM X
CLC5956PCASM X
CLC5957PCASM X
CLC5958PCASM X
CLC-DRCS-PCASM X
CLC-DRCS7-PCASM X X
Remove for
use with Data
Capture
Board
NOTE: A mating connector comes with each A/D or
DRCS evaluation board that can be attached to the DIN
connector on the board. The mating connector allows the
evaluation boards to be wired to a custom fixture or
customer specific circuit. In Figure 3, the Data Capture
Board with its DIN connector is shown at the bottom of
the photo. An evaluation board with a mating connector
attached to its DIN connector is shown at the top of the
photo.
This mating connector must not be attached to
an A/D or DRCS evaluation board DIN connector
when interfacing to the Data Capture Board.
http://www.national.com
4
Life Support Policy
National’s products are not authorized for use as critical components in life support devices or systems without the express written approval
of the president of National Semiconductor Corporation. As used herein:
1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Asia Pacific Customer Japan Ltd.
Tel: 1(800) 272-9959 Fax: +49 (0) 1 80-530 85 86
Response Group
Tel: 81-3-5639-7560
Fax: 1(800) 737-7018 E-mail: europe.support.nsc.com Tel: 65-25-2544466 Fax: 81-3-5639-7507
E-mail: support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 Fax: 65-2504466
English Tel: +49 (0) 1 80-532 78 32 E-mail: sea.support@nsc.com
Francais Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
N
Wireless Base Station Evaluation Board
Interoperability Guide