SMA Connectors General Description Delta SMA connectors are subminiature, precision, 50 impedance connectors with 1 4 "-36 threaded coupling. They are best suited for use with high-frequency semi-rigid cables in demanding applications up to 18 GHz, or miniature flexible cables up to 12.4 GHz. Our extensive line of SMA receptacles includes configurations for virtually any packaging requirement, and we can supply any adapter or accessory you may need to complete your system design. Adapters between SMA and other series are shown starting on page 176. Many of our SMA connectors are available as MIL-PRF-39012 QPL versions. These types are listed starting on page 195. As with our other connector series, Delta's customer-driven design results in SMA series connectors with practical and unique features that make your design and assembly process easier. Some of these include: * One-Step cable connectors for quick, accurate assembly to semi-rigid cable. * PressMount receptacles (page 115) mount securely in a single round hole, saving space on your components and reducing your housing fabrication costs. * Panel receptacles with flange sizes to match the same hole pattern as standard BNC, TNC or N connectors, letting you drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed. * Edge-mount P.C. board receptacles (page 114). * Our new E-Line brass SMA connectors provide a lower-cost alternative for commercial applications (page 123). Our SMA series product line is still growing, so please call if you don't see what you need. SMA Configuration Cable Plugs for Semi-Rigid Cable ................................. 2 Cable Plugs for Flexible Cable ....................................... 3 Straight Cable Jacks for Semi-Rigid Cable ................. 4 Bulkhead Cable Jacks for Semi-Rigid Cable .............. 4 Panel Cable Jacks for Semi-Rigid Cable ...................... 4 Straight Cable Jacks for Flexible Cable ....................... 5 Bulkhead Cable Jacks for Flexible Cable .................... 5 Straight Panel Jack Receptacles.................................... 6 Panel Jack Receptacles for Microstrip .........................10 Right Angle Panel Jack Receptacles ............................ 11 Stripline Receptacles......................................................... 11 Bulkhead Jack Receptacles ............................................. 12 P.C. Board Receptacles (Through-Hole Mount)....... 12 P.C. Board Receptacles (Edge Mount)......................... 13 PressMount Receptacles ................................................. 14 Panel Plug Receptacles .................................................... 15 Dust Caps............................................................................... 19 In-Series Adapters.............................................................. 20 SMA Specifications* Plug Interface** Electrical: Nominal Impedance: 50 ohms. Frequency Range: DC-18 GHz (with semi-rigid cable); DC-12.4 GHz (with flexible cable). Voltage Rating: 335-500 volts RMS (dependent on cable). Dielectric Withstanding Voltage : 500-1500 volts RMS (dependent on cable). Insulation Resistance: 5,000 megohms. Reference Plane .135 max. .015/.045 .1808 max. .0355/.0370 .250-36 UNS-2B, .130 min. full thread Contact shoulder projection .000 max; recession .010 max. .250 min. Insulator projection .000 max. .100 max. Jack Interface** .074/.078 .015/.045 .250-36 UNS-2A, .170 min. full thread .218 min. .049 .051 .208 .1810 .216 min. Insulator projection .000 max. **Some proportions altered to illustrate detail. 1 Contact projection .000 max; recession .010 max. Reference Plane Delta Electronics Mfg. Corp. Materials/Finishes: Insulators: Teflon per ASTM D1710. Male Contacts: Brass per ASTM B16, or Beryllium Copper per ASTM B196. Female Contacts: Beryllium Copper per ASTM B196. Contact Plating : Gold per MIL-DTL-45204. Gaskets: Silicone rubber per ZZ-R-765,Class II, Grade 50. Other Metal Parts: Stainless steel per ASTM A582, plated gold per MIL-DTL-45204 or passivated to meet corrosion requirements of MILPRF-39012; or Brass per ASTM B16: plated gold per MIL-DTL-45204. All other specifications are in accordance with the latest issues of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL specifications, and interfaces are in accordance with MIL-STD-348. *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available on request. deltarf.com 978-927-1060 sales@deltarf.com SMA Cable Plugs Straight Plug - For Semi-Rigid Cable .250 B Figure 2 Figure 1 (Direct solder) Figure 3 (Direct solder) (Solder-clamp) A A A B Delta One-Step Cable Attachment for Semi-Rigid Cable Solder Cable Cable Group Figure 13 13 13 13 13 13 13 13 14 14 14 14 1 1 2 2 2 2 3 4 2 2 3 4 B hex hex Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Dimensions A B .330 .330 .330 .330 .330 .330 .680 .330 .330 .330 .680 .330 Body Plating Contact A Figure 4 (One-Step cable attachment) Assembly Procedure/ Trim Code Delta P/N .-- Gold None ( 2) 1301031G003-000 G/01 ( 1) .-- Gold/PCN None ( 2) 1301031K003-000 G/01 .445 Gold None ( 2) 1301031G003-002 G/01 .445 Gold/PCN ( 1) None ( 2) 1301031K003-002 G/01 .445 Gold Gold 1301031G003-003 H/01 .445 Gold/PCN ( 1) Gold 1301031K003-012 H/01 .312 Gold Gold ( C ) 1301031G007-000 *** .430 Gold/PCN ( 1) Gold ( C ) 1301031K003-008 I/01 .445 Gold Gold 1301094G003-000 H/01 .445 Gold/PCN ( 1) Gold 1301094K003-000 H/01 .312 Gold Gold ( C ) 1301025G007-000 *** .430 Gold/PCN ( 1) Gold ( C ) 1301094K003-001 I/01 ( 1) Gold-plated body and passivated coupling nut. ( 2) Cable center conductor used as contact. Right Angle Plug - For Semi-Rigid Cable A Figure 1 (Direct solder) Cable Group Figure 13 13 13 13 14 14 14 14 1 1 2 2 1 1 2 2 Figure 2 (One-Step cable attachment) B Dimensions A B .680 .680 .570 .570 .680 .680 .570 .570 * See page 209 for cable groups. 2 A .430 .430 .580 .580 .430 .430 .580 .580 Body Plating Contact Delta P/N B Assembly Procedure/ Trim Code Gold ( C ) 1305031G003-000 Gold ( C ) 1305031K003-000 Gold ( C ) 1305031G003-002 Gold ( C ) 1305031K003-004 Gold ( C ) 1305025G003-000 Gold ( C ) 1305025K003-000 Gold ( C ) 1305094G003-003 Gold ( C ) 1305094K003-005 ( 1) Gold-plated body and passivated coupling nut. Gold Gold/PCN ( 1) Gold Gold/PCN ( 1) Gold Gold/PCN ( 1) Gold Gold/PCN ( 1) J/01 J/01 I/01 I/01 J/01 J/01 I/01 I/01 * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Cable Plugs Straight Plug - For Flexible Cable C hex C max. Figure 2 Figure 1 (Clamp type) (Crimp type, shown with supplied heat-shrink tubing) A B B A (to end of crimp sleeve) See page 194 for MIL-PRF-39012 QPL version. Cable Group Figure 5 5 6 6 9 9 10 10 5, 6 5, 6 9 9 1 1 1 1 1 1 1 1 2 2 2 2 A Dimensions B C .330 .330 .330 .330 .330 .330 .330 .330 .330 .330 .330 .330 .700 .700 .700 .700 .700 .700 .700 .700 .750 .750 .750 .750 Body 1.187 1.187 1.187 1.187 1.187 1.187 1.187 1.187 .312 .312 .312 .312 Plating Contact Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Assembly Procedure/ Trim Code Delta P/N Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C ) Gold ( C ) Gold ( C ) Gold ( C ) 1303017G000-000 1303017K000-000 1303013G000-000 1303013K000-002 1303036G000-000 1303036K000-000 1303100G000-002 1303100K000-002 1301015G005-000 1301015K005-000 1301037G005-000 1301037K005-000 K/02 K/02 K/02 K/02 K/02 K/02 K/02 K/02 *** *** *** *** Right Angle Plug - For Flexible Cable A B Figure 1 C max. (Crimp type, shown with supplied heat-shrink tubing) (to end of crimp sleeve) See page 195 for MIL-PRF-39012 QPL version. Cable Group Figure 5 5 6 6 9 9 10 10 11 11 1 1 1 1 1 1 1 1 1 1 Dimensions A B C .680 .680 .680 .680 .680 .680 .680 .680 .680 .680 * See page 209 for cable groups. 3 .600 .600 .600 .600 .600 .600 .600 .600 .600 .600 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 Plating Body Contact Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1307017G001-000 1307017K001-000 1307013G001-000 1307013K001-000 1307036G001-000 1307036K001-000 1307100G001-000 1307100K001-000 1307038G001-000 1307038K001-000 L/03 L/03 L/03 L/03 L/03 L/03 L/03 L/03 L/03 L/03 * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Cable Jacks Straight Jack - For Semi-Rigid Cable .250 B hex Figure 1 hex B hex B hex Figure 2 (Direct solder) Figure 3 (Solder-clamp) A Cable Group Figure 13 13 13 14 14 14 1 2 3 1 2 3 (One-Step cable attachment) A Dimensions A B .500 .680 .500 .500 .680 .500 Plating Body Contact .250 .312 .250 .250 .312 .250 Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold A Assembly Procedure/ Trim Code Delta P/N 1308031G003-002 1308031G007-000 1308031G003-004 1308094G003-000 1308025G007-000 1308094G003-001 ( C) ( C) ( C) ( C) H/01 *** I/01 H/01 *** I/01 Panel Bulkhead Jacks - For Semi-Rigid Cable A A Figure 1 Figure 2 (Direct solder) (One-Step cable attachment) C B C B A .093 max. panel B Figure 3 C hex C hex .093 max. panel 13 13 13 13 13 14 14 14 14 14 1 2 3 4 5 1 2 3 4 5 Solder Cable Dimensions A B .560 .500 .750 .750 .700 .500 .500 .750 .750 .750 .093 hex max. panel (Solder-clamp, no mounting gasket) Delta One-Step Cable Attachment for Semi-Rigid Cable Fig. C B Figure 4 (Direct solder, with mounting gasket) Cable Group A A .375 .375 .415 .440 .415 .375 .375 .415 .440 .415 C Mounting Figure .065 .065 .437 .312 .437 .065 .065 .437 .312 .437 05 05 67 67 67 05 05 67 67 67 C hex B Figure 5 (One-Step cable attachment, with mounting gasket) Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable-- simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Plating Body Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1311031G053-000 1311031G053-003 1317031G673-000 1317031G677-000 1317031G673-003 1311025G053-000 1311025G053-001 1317025G673-000 1317025G677-000 1317025G673-001 H/01 I/01 H/02 *** I/01 H/01 I/01 H/02 *** I/01 * See page 209 for cable groups. * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. 4 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Cable Jacks Straight Jack - For Flexible Cable B max. A (to end of crimp sleeve) C hex Figure 1 (Crimp type, shown with supplied heat-shrink tubing) See page 195 for MIL-PRF-39012 QPL version. Cable Group Figure 5 5 6 6 9 9 1 1 1 1 1 1 Dimensions A B C .800 .800 .800 .800 .800 .800 1.125 1.125 1.125 1.125 1.125 1.125 Plating Body Contact .250 .250 .250 .250 .250 .250 Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Delta P/N Assembly Procedure/ Trim Code 1308017G000-000 1308017K000-000 1308013G000-000 1308013K000-000 1308037G000-000 1308037K000-000 K/03 K/03 K/03 K/03 K/03 K/03 Bulkhead Jack - For Flexible Cable C max. B (to end of crimp sleeve) A max. A .312 B .312 hex .125 hex C hex max. panel .125 Figure 1 max. panel Figure 2 (Crimp type, shown with supplied heat-shrink tubing) (Clamp type) See page 196 for MIL-PRF-39012 QPL version. Cable Group Fig. 5 5 6 6 9 9 10 10 5, 6 5, 6 9 9 1 1 1 1 1 1 1 1 2 2 2 2 A .450 .450 .450 .450 .450 .450 .450 .450 .850 .850 .850 .850 Dimensions B C .940 .940 .940 .940 .940 .940 .940 .940 .450 .450 .450 .450 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 .312 .312 .312 .312 Plating Body Contact Mounting Figure 67 67 67 67 67 67 67 67 67 67 67 67 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1319017G670-000 1319017K670-000 1319013G670-000 1319013K670-000 1319037G670-000 1319037K670-000 1319100G670-000 1319100K670-000 1316015G675-000 1316015K675-000 1316037G675-000 1316037K675-000 K/04 K/04 K/04 K/04 K/04 K/04 K/04 K/04 *** *** *** *** * See page 209 for cable groups. * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. 5 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Jack Receptacle - Solder Pot Contact .58 C .065 dia. typ. B (CL ) typ. dia. typ. .032 ( I.D. ) A square ( 3/ 8 " .58 C .050 dia. .375 Figure 1 B (CL ) typ. square flange) .032 ( I.D. ) .58 C dia. typ. .050 dia. .065 .065 A B (CL ) typ. .032 Figure 4 .050 ( I.D. ) dia. A square .375 square (1" square flange, interchangeable with type N standard flange size) .375 Figure 2 ( 1/ 2 " square flange, SMA standard flange size) See page 197 for MIL-PRF-39012 QPL version. .102 dia. typ. .58 C dia. typ. .032 A B (CL ) .065 ( I.D. ) .050 dia. .162 dia. B (CL ) typ. .032 ( I.D. ) .223 .050 A .065 .375 Figure 5 dia. (2-hole flange) .375 square .58 C See page 197 for MIL-PRF-39012 QPL version. Figure 3 ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) Figure 1 1 2 2 3 3 4 4 5 5 5 5 A Dimensions B C Mounting Figure Body Plating Contact .375 .375 .500 .500 .687 .687 1.00 1.00 .625 .625 .625 .625 .250 .250 .340 .340 .500 .500 .718 .718 .481 .481 .481 .481 .067 .067 .102 .102 .125 .125 .125 .125 .025 .025 .000 .000 91 91 05 05 09 09 33 33 92 92 92 92 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1313000G911-000 1313000K911-000 1313000G051-000 1313000K051-002 1313000G091-000 1313000K091-000 1313000G331-000 1313000K331-000 1313000G921-000 1313000K921-000 1313000G921-002 1313000K921-002 * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). * All items available with other flange, contact, and insulator configurations. 6 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Jack Receptacle - Tab Contact C dia. typ. Tab .004/.007 thick x .050 wide B (CL ) typ. A sq. .065 .065 .100 Figure 1 .375 Tab .004/.007 thick x .050 wide B (CL ) typ. ( 3/ 8 " square flange) C C dia. typ. dia. typ. .065 Tab .004/.007 thick x .050 wide B (CL ) typ. A sq. A .100 square .375 Figure 4 .100 Figure 2 (1" square flange, interchangeable with type N standard flange size) .375 ( 1/ 2 " square flange, SMA standard flange size) C C .065 dia. typ. dia. typ. Tab .004/.007 thick x .050 wide B (CL ) typ. A .100 sq. Tab .004/.007 thick x .050 wide A (CBL ) .223 .375 .100 Figure 3 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 A .375 .375 .375 .375 .500 .500 .500 .500 .687 .687 .687 .687 1.00 1.00 1.00 1.00 .625 .625 .625 .625 Dimensions B .250 .250 .250 .250 .340 .340 .340 .340 .500 .500 .500 .500 .718 .718 .718 .718 .481 .481 .481 .481 .375 Figure 5 ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) Figure .065 (2-hole flange) Plating C Mounting Figure Body .067 .067 .067 .067 .102 .102 .102 .102 .125 .125 .125 .125 .125 .125 .125 .125 .102 .102 .102 .102 91 91 91 91 05 05 05 05 09 09 09 09 33 33 33 33 92 92 92 92 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1358000G910-002 1358000K910-002 1358000G911-059 1358000K911-059 1358000G050-005 1358000K050-005 1358000G051-003 1358000K051-003 1358000G090-001 1358000K090-001 1358000G091-008 1358000K091-008 1358000G330-001 1358000K330-001 1358000G331-002 1358000K331-002 1358000G920-003 1358000K920-003 1358000G921-063 1358000K921-063 * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). * All items available with other flange, contact, and insulator configurations. 7 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Jack Receptacle - Slotted Contact .050 C B (CL ) typ. .065 dia. C .050 (+.003, -.001) A sq. .050 .375 B (CL ) typ. Figure 1 C (+.003, -.001) dia. .065 A dia. typ. B (CL ) typ. .050 Figure 2 .375 C dia. typ. ( 1/ 2 " square flange, SMA standard flange size) C dia. typ. .050 B (CL ) typ. .050 A (CBL ) .065 (+.003, -.001) .223 .050 Figure 5 (+.003, -.001) .050 sq. .375 Other Standard Slot Widths Our other standard slot widths for these connectors (.018" and .036") are readily available--call for part numbers. ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 A Dimensions B .375 .375 .375 .375 .500 .500 .500 .500 .687 .687 .687 .687 1.00 1.00 1.00 1.00 .625 .625 .625 .625 .250 .250 .250 .250 .340 .340 .340 .340 .500 .500 .500 .500 .718 .718 .718 .718 .481 .481 .481 .481 .375 (2-hole flange) Figure 3 Figure .065 dia. Slot .012 wide dia. Slot .012 wide A .375 (1" square flange, interchangeable with type N standard flange size) (+.003, -.001) sq. .050 sq. Figure 4 Slot .012 wide A dia. Slot .012 wide ( 3/ 8 " square flange) .050 .065 dia. typ. dia. Slot typ. .012 wide Plating C Mounting Figure Body .067 .067 .067 .067 .102 .102 .102 .102 .125 .125 .125 .125 .125 .125 .125 .125 .102 .102 .102 .102 91 91 91 91 05 05 05 05 09 09 09 09 33 33 33 33 92 92 92 92 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1343000G910-003 1343000K910-003 1343000G911-006 1343000K911-006 1343000G050-006 1343000K050-006 1343000G051-021 1343000K051-021 1343000G090-001 1343000K090-001 1343000G091-006 1343000K091-006 1343000G330-006 1343000K330-006 1343000G331-011 1343000K331-011 1343000G920-004 1343000K920-004 1343000G921-006 1343000K921-006 * (C) in contact plating column indicates captive contact (epoxy captivated). * See page 208 for mounting dimensions. * All items available with other flange, contact, and insulator configurations. 8 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Jack Receptacle - Post Contact .590 .050 .065 dia. B (CL ) typ. C A sq. dia. typ. Figure 1 .162 dia. .705 .705 .590 .375 B (CL ) typ. ( 3/ 8 " square flange) .162 .050 .065 .590 .050 C dia. B (CL ) typ. C A sq. .162 dia. typ. A dia. typ. sq. dia. .065 .375 Figure 4 .375 .705 dia. dia. (1" square flange, interchangeable with type N standard flange size) Figure 2 ( 1/ 2 " square flange, SMA standard flange size) .590 C dia. typ. .065 B (CL ) typ. .050 A ( 11/ 16 " C .050 .162 dia. .705 sq. dia. .375 .223 Figure 3 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 A .375 .375 .375 .375 .500 .500 .500 .500 .687 .687 .687 .687 1.00 1.00 1.00 1.00 .625 .625 .625 .625 Dimensions B .250 .250 .250 .250 .340 .340 .340 .340 .500 .500 .500 .500 .718 .718 .718 .718 .481 .481 .481 .481 dia. .375 .705 Figure 5 square flange, interchangeable with BNC and TNC standard flange size) Figure .065 dia. typ. A (CBL ) .162 dia. .590 (2-hole flange) Plating C Mounting Figure Body .067 .067 .067 .067 .102 .102 .102 .102 .125 .125 .125 .125 .125 .125 .125 .125 .102 .102 .102 .102 91 91 91 91 05 05 05 05 09 09 09 09 33 33 33 33 92 92 92 92 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1358000G910-003 1358000K910-003 1358000G911-061 1358000K911-061 1358000G050-000 1358000K050-004 1358000G051-000 1358000K051-000 1358000G090-000 1358000K090-000 1358000G091-014 1358000K091-014 1358000G330-000 1358000K330-000 1358000G331-003 1358000K331-003 1358000G920-000 1358000K920-000 1358000G921-010 1358000K921-010 * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). * All items available with other flange, contact, and insulator configurations. 9 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Jack Receptacle - Post Contact (For Microstrip) .067 .085 dia. typ. B (CL ) typ. .010 dia. .050 A sq. .065 dia. Figure 1 .125 .085 .375 C B (CL ) typ. ( 3/ 8 " square flange) .102 B (CL ) typ. .085 .010 dia. .010 dia. .050 sq. dia. dia. .050 .065 dia. typ. A .065 dia. typ. A sq. .375 C Figure 4 (1" square flange, interchangeable with type N standard flange size) .375 C Figure 2 ( 1/ 2 " square flange, SMA standard flange size) .125 dia. typ. .085 B (CL ) typ. .010 dia. .102 .065 dia. typ. A (CBL ) dia. C sq. Figure 3 .375 C .223 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 A .375 .375 .375 .375 .500 .500 .500 .500 .687 .687 .687 .687 1.00 1.00 1.00 1.00 .625 .625 .625 .625 Dimensions B .250 .250 .250 .250 .340 .340 .340 .340 .500 .500 .500 .500 .718 .718 .718 .718 .481 .481 .481 .481 .375 Figure 5 ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) Figure .065 dia. .010 dia. .050 .050 A .085 (2-hole flange) Plating C Mounting Figure Body .057 .057 .125 .125 .057 .057 .125 .125 .057 .057 .125 .125 .057 .057 .125 .125 .057 .057 .125 .125 91 91 91 91 05 05 05 05 09 09 09 09 33 33 33 33 92 92 92 92 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1358000G911-014 1358000K911-014 1358000G911-085 1358000K911-085 1358000G051-019 1358000K051-019 1358000G051-128 1358000K051-128 1358000G091-015 1358000K091-015 1358000G091-016 1358000K091-016 1358000G331-004 1358000K331-004 1358000G331-005 1358000K331-005 1358000G051-035 1358000K051-035 1358000G051-034 1358000K051-034 * (C) in contact plating column indicates captive contact (epoxy captivated). * See page 208 for mounting dimensions. * All items available with other flange, contact, and insulator configurations. 10 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Right Angle Panel Jack Receptacle .180 .340 (CL ) typ. .340 (CL ) typ. C .505 .102 .505 C dia. typ. .500 .500 sq. sq. .032 Tab A thick x B wide .59 ( I.D. ) A dia. .102 B dia. typ. dia. Figure 1 Figure 2 (Solder pot contact) .340 (CL ) typ. Slot A wide sq. .705 C sq. B dia. A dia. B dia. .102 dia. typ. .59 .102 dia. typ. 1 1 2 2 3 3 3 3 3 3 4 4 Figure 4 (Slotted contact) A Dimensions B C Mounting Figure Body .050 .050 .004/.007 .004/.007 .012 .012 .018 .018 .036 .036 .050 .050 .162 .162 .050 .050 .050 .050 .050 .050 .050 .050 .162 .162 .062 .062 .100 .100 .102 .050 .050 .050 .050 .050 .590 .590 05 05 05 05 05 05 05 05 05 05 05 05 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Figure .505 .500 (+.003, -.001) Figure 3 (Tab contact) .340 (CL ) typ. .505 C .500 .59 .59 (Post contact) Plating Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1315000G050-000 1315000K050-000 1364000G051-015 1364000K051-015 1366000G051-017 1366000K051-017 1366000G051-018 1366000K051-018 1366000G051-019 1366000K051-019 1364000G051-016 1364000K051-016 Stripline Receptacle 8 holes, H thread Figure 1 .050 D Figure 1 1 1 1 1 1 A B C .031 .031 .063 .063 .125 .125 .085 .085 .085 .085 .085 .085 .375 .375 .375 .375 .375 .375 Dimensions D E .010 .010 .010 .010 .010 .010 .072 .072 .072 .072 .072 .072 C B A F dia. G dia. b.c. dia. E dia. Plating F G H Body Contact .562 .562 .562 .562 .562 .562 .438 .438 .438 .438 .438 .438 #2-56 #2-56 #2-56 #2-56 #2-56 #2-56 Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Delta P/N 1357000G000-012 1357000K000-012 1357000G000-002 1357000K000-002 1357000G000-006 1357000K000-006 * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * All items available with other flange, contact, and insulator configurations. 11 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Bulkhead Jack Receptacles C .032 ( I.D. ) .050 dia. .162 dia. B A Figure 1 ( I.D. ) .050 dia. .162 dia. .312 hex C .280 .162 dia. A Figure 3 1 1 1 1 2 2 3 3 4 4 4 4 4 4 A Dimensions B .670 .670 .670 .670 .670 .670 .670 .670 .660 .660 .660 .660 .660 .660 .450 .450 .450 .450 .415 .415 .500 .500 .500 .500 .500 .500 .500 .500 C .050 .250 A B Figure 4 (Front mount, solder pot contact, no mounting gasket) Figure .160 dia. dia. B hex hex (Rear mount, solder pot contact, with mounting gasket) See page 197 for MIL-PRF-39012 QPL version. .050 dia. .162 dia. .437 Figure 2 ( I.D. ) .312 B A (Rear mount, solder pot contact, no mounting gasket) .032 C .032 See page 197 for MIL-PRF-39012 QPL version. (Round body, post contact) Plating C Max. Panel Mounting Figure Body .000 .000 .062 .062 .062 .062 .062 .062 .076 .076 .076 .076 .000 .000 .125 .125 .125 .125 .093 .093 .125 .125 .125 .125 .125 .125 .125 .125 67 67 67 67 67 67 67 67 82 82 82 82 82 82 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Delta P/N Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) 1320000G671-000 1320000K671-000 1320000G821-002 1320000K821-000 1320000G821-000 1320000K821-011 1320000G671-005 1320000K671-005 1321000G820-003 1321000K820-003 1321000G821-000 1321000K821-014 1321000G821-065 1321000K821-065 ( C) ( C) ( C) ( C) Printed-Circuit Board Receptacles - Through-Hole Mount .200 (CL ) typ. .250 sq. C .050 dia. Figure 1 .040 A sq. typ. Figure 1 2 .200 (CL ) typ. A Dimensions B .530 .583 .375 .375 .250 sq. B .050 dia. Figure 2 B .040 A C sq. typ. C Max. Board Mounting Figure .155 .155 .125 .125 PCB05 PCB05 Plating Body Contact Gold Gold Gold ( C ) Gold ( C ) Delta P/N 1367000G911-000 1369000G000-000 See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). All items available with other contact and insulator configurations. 12 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Delta Edge Mount Receptacles These connectors eliminate the need for drilling P.C. boards for mounting. Edge mounting provides design versatility, particularly in daughterboard configurations. In addition, styles with bulkhead mounting allow P.C. boards to be attached directly to component housings or panels, eliminating the expense of adapters, cable assemblies, and/or additional board mounting hardware. Bulkhead mounted types are available with mounting gaskets as an option (see picture). Delta SMA edge mount receptacles feature gold-plated brass bodies for low cost, with goldplated beryllium copper center contacts. Insulators and contacts are mechanically captivated to meet MIL-PRF-39012 requirements. All are available with stainless-steel bodies. Bulkhead jack with mounting gasket Edge Mount P.C. Board Receptacles - Bulkhead Jack .187 .050 (contact dia. ush with insulator) .065 B .375 A .040 .312 typ. .040 .250 D typ. .030 dia. C Board Thickness Dimensions B C A .042 .047 .062 .062 .048 .053 .068 .068 .500 .500 .500 .820 dia. (max. panel) Plating .125 .125 .125 .425 D Body Contact .093 .088 .073 .073 Gold Gold Gold Gold Gold Gold Gold Gold Delta P/N ( C) ( C) ( C) ( C) 1367000G91P-021 1367000G91P-022 1367000G91P-006 1367000G91P-023 Edge Mount P.C. Board Receptacles - Straight Jack .050 (contact dia. ush with insulator) .050 .187 .375 .065 .312 .040 typ. .040 B typ. .030 .250 Board Thickness 1 1 1 2 2 2 .042 .047 .062 .042 .047 .062 Figure 1 Tab contact .020 wide x .010 thick (Post contact) Dimensions A B .048 .053 .068 .048 .053 .068 .093 .088 .073 .103 .098 .083 Delta Electronics Mfg. Corp. Plating Body Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold deltarf.com .312 B typ. * (C) in contact plating column indicates captive contact (mechanical captivation). 13 .375 .065 typ. .040 dia. dia. Figure .375 .187 A A .040 (contact dia. ush with insulator) .375 .250 .075 dia. Figure 2 (Tab contact) Delta P/N ( C) ( C) ( C) ( C) ( C) ( C) 1367000G91P-026 1367000G91P-027 1367000G91P-000 1367000G91P-024 1367000G91P-025 1367000G91P-020 * See page 114 for plug types. 978-927-1060 sales@deltarf.com SMA Receptacles Press Mount Receptacles Delta PressMount Receptacles Component housing These connectors eliminate the need for complicated mounting hole patterns and mounting hardware. They are simply pressed into a single through hole, and the precisely-engineered knurled mounting section provides retention strength far greater than normal mating and unmating forces. An integral shoulder provides a positive stop when mounting. Internal Circuitry PressMounts are available for a wide variety of Delta connector series, and can be used in packages as small as the outer diameter of the connector body. .300 A dia. .300 Figure 1 Figure 2 (Post contact) B (Post contact, brass body) dia. .115 .270 .394 Tab B thick x .050 wide (Tab contact) Figure 4 .115 .270 .300 Figure 6 (Solder pot contact) B .270 dia. over knurl .437 dia. .072 dia. over knurl .275 A dia. .437 .115 .275 A dia. Figure 8 (Plug, tab contact) .270 dia. over knurl 1 2 3 4 5 6 6 7 8 B .270 .115 Figure 7 Figure A dia. (Turret contact) ( I.D. ) .453 .167 dia. over knurl A dia. Tab B thick x .050 wide .240 .275 dia. over knurl .650 A dia. .276 (Tab contact, brass body) dia. .115 dia. over knurl A dia. Figure 3 .300 Figure 5 B .270 .275 dia. over knurl .300 A dia. Dimensions A B .062 .390 .100 .120 .200 .465 .425 .100 .062 .050 .050 .005/.008 .005/.008 .032 .250 .250 .005/.008 .050 Tab B thick x .050 wide (Plug, post contact) B .405 .115 dia. .115 .270 dia. over knurl Plating Min. Panel Mounting Hole Body .100 .100 .100 .100 .100 .100 .100 .100 .100 .267 .001 dia. .267 .001 dia. .267 .001 dia. .237 .001 dia. .267 .001 dia. .267 .001 dia. .267 .001 dia. .267 .001 dia. .267 .001 dia. Passivated Gold Passivated Gold Passivated Gold Gold Passivated Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) .405 Delta P/N 1320000K911-002 1320000G911-076 1320000K911-003 1320000G911-084 1320000K911-004 1320000G911-085 1320000G911-078 1324000K911-003 1324000K911-002 (C) in contact plating column indicates captive contact (mechanical captivation). 14 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Edge Mount P.C. Board Receptacles - Straight Plugs .050 (contact dia. ush with insulator) .050 .375 .065 A .040 (contact dia. ush with insulator) .499 .187 .040 .030 .040 dia. 1 1 1 2 2 2 .042 .047 .062 .042 .047 .062 Dimensions A B .048 .053 .068 .048 .053 .068 .075 Tab contact .020 wide x .010 thick (Post contact) Board Thickness B typ. Figure 1 Figure .312 typ. B typ. Figure 2 (Tab contact) Plating .093 .088 .073 .103 .098 .083 .375 .065 A .312 typ. .040 .499 .187 Body Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Delta P/N ( C) ( C) ( C) ( C) ( C) ( C) 1368000G91P-004 1368000G91P-005 1368000G91P-006 1368000G91P-001 1368000G91P-002 1368000G91P-003 Panel Plug Receptacles - Solder Pot Contact Figure 1 Figure 2 .20 ( 3/ 8 " square flange) .065 C dia. typ. B (CL ) typ. .032 A .050 ( I.D. ) .507 dia. A .102 .20 dia. typ. Figure 3 1 1 2 2 3 3 3 3 A Dimensions B .375 .375 .500 .500 .625 .625 .625 .625 .250 .250 .340 .340 .481 .481 .481 .481 .507 C .050 dia. .162 dia. .065 .507 Plating C Mounting Figure Body .067 .067 .102 .102 .000 .000 .025 .025 91 91 05 05 92A 92A 92A 92A Gold Passivated Gold Passivated Gold Passivated Passivated Passivated Delta Electronics Mfg. Corp. dia. ( I.D. ) * See page 208 for mounting dimensions. 15 .050 sq. .032 B (CL ) (2-hole flange) .260 Figure .032 ( I.D. ) square .065 C dia. typ. B (CL ) typ. .20 ( 1/ 2 " square flange) Contact Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1359000G911-013 1359000K911-013 1359000G051-010 1359000K051-010 1359000G921-017 1359000K921-017 1359000G921-018 1359000K921-018 * (C) in contact plating column indicates captive contact. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Plug Receptacles - Tab Contact .100 .065 C dia. Tab typ. .004/.007 thick x .050 wide B (CL ) typ. A sq. .507 Figure 1 ( 3/ 8 " square flange) .100 C .065 dia. typ. Tab .004/.007 thick x .050 wide B (CL ) typ. A .507 sq. Figure 2 ( 1/ 2 " square flange) C dia. typ. B (CL ) .100 Tab .004/.007 thick x .050 wide .065 .507 .260 Figure 3 (2-hole flange) Figure 1 1 1 1 2 2 2 2 3 3 3 3 A .375 .375 .375 .375 .500 .500 .500 .500 .625 .625 .625 .625 Dimensions B .250 .250 .250 .250 .340 .340 .340 .340 .481 .481 .481 .481 Plating C Mounting Figure Body .067 .067 .067 .067 .102 .102 .102 .102 .102 .102 .102 .102 91 91 91 91 05 05 05 05 92A 92A 92A 92A Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1359000G910-002 1359000K910-002 1359000G911-014 1359000K911-014 1359000G050-005 1359000K050-005 1359000G051-045 1359000K051-045 1359000G920-001 1359000K920-001 1359000G921-019 1359000K921-019 * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). * All items available with other flange, contact, and insulator configurations. 16 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Plug Receptacles - Slotted Contact .065 .050 C B (CL ) typ. dia. typ. dia. Slot .012 wide (+.003, -.001) A sq. .050 .507 Figure 1 ( 3/ 8 " square flange) B (CL ) typ. .050 Slot .012 wide (+.003, -.001) A C square .050 dia. .065 dia. typ. .507 Figure 2 ( 1/ 2 " square flange) C dia. typ. B (CL ) .050 Slot .012 wide (+.003, -.001) .050 dia. .065 .507 .260 Figure 3 (2-hole flange) Other Standard Slot Widths Our other standard slot widths for these connectors (.018" and .036") are readily available--call for part numbers. Figure 1 1 1 1 2 2 2 2 3 3 3 3 A Dimensions B C .375 .375 .375 .375 .500 .500 .500 .500 .625 .625 .625 .625 .250 .250 .250 .250 .340 .340 .340 .340 .481 .481 .481 .481 .067 .067 .067 .067 .102 .102 .102 .102 .102 .102 .102 .102 Mounting Figure 91 91 91 91 05 05 05 05 92A 92A 92A 92A Body Plating Contact Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1359000G910-004 1359000K910-004 1359000G911-023 1359000K911-023 1359000G050-007 1359000K050-007 1359000G051-038 1359000K051-038 1359000G920-002 1359000K920-002 1359000G921-020 1359000K921-020 See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). All items available with other flange, contact, and insulator configurations. 17 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Panel Plug Receptacle - Post Contact .49 .330 C dia. typ. B (CL ) typ. .050 dia. A sq. ( 3/ 8 " B (CL ) typ. .162 dia. .065 Figure 1 .507 square flange) .49 .330 C dia. typ. .050 dia. .162 dia. .065 A square .507 Figure 2 ( 1/ 2 " square flange) .49 C .330 dia. typ. B (CL ) .050 dia. .162 dia. .065 .260 Figure 3 .507 (2-hole flange) Figure 1 1 1 1 2 2 2 2 3 3 3 3 A Dimensions B C Mounting Figure Body Plating Contact .375 .375 .375 .375 .500 .500 .500 .500 .625 .625 .625 .625 .250 .250 .250 .250 .340 .340 .340 .340 .481 .481 .481 .481 .067 .067 .067 .067 .102 .102 .102 .102 .102 .102 .102 .102 91 91 91 91 05 05 05 05 92A 92A 92A 92A Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1359000G910-003 1359000K910-003 1359000G911-015 1359000K911-015 1359000G050-000 1359000K050-002 1359000G051-004 1359000K051-004 1323000G920-000 1323000K920-000 1323000G921-001 1323000K921-001 * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (epoxy captivated). * All items available with other flange, contact, and insulator configurations. 18 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com SMA Receptacles Dummy Receptacles B (CL ) typ. .102 dia. typ. C dia. typ. A B (CL ) .065 .065 .375 A square .223 .375 Figure 1 Figure 2 ( 1/ 2 " square flange) Figure 1 1 2 2 A Dimensions B .500 .500 .625 .625 .340 .340 .481 .481 (2-hole flange) Plating C Mounting Figure Body Contact .102 .102 .102 .102 05 05 92 92 Gold Passivated Gold Passivated -- -- -- -- Delta P/N 1363000G050-001 1363000K050-002 1363000G920-000 1363000K920-000 Dust Caps A C A ( I.D. ) C ( I.D. ) B B Figure 1 Figure 2 (Shown with safety chain) (Shown with bead chain) See page 195 for MIL-PRF-39012 QPL versions. Figure 1 1 1 1 1 2 2 2 A Dimensions B C .500 .500 .275 .500 .330 .500 .500 .390 2.25 2.25 .-- 3.25 .-- 2.25 2.25 .-- .144 .144 . -- .281 . -- .144 .144 . -- Features Bead chain Bead chain No chain Safety chain No chain / shorting type Bead chain Bead chain No chain * See page 208 for mounting dimensions . 19 Delta Electronics Mfg. Corp. Plating Body Contact Gold Passivated Passivated Passivated Passivated Gold Passivated Passivated -- -- -- -- Passivated -- -- -- Delta P/N 1332000G000-000 1332000K000-000 1332000K00A-001 1332000K00B-003 1332000K00C-000 1333000G000-000 1333000K000-000 1333000K00A-000 * Dust caps are available with other chain styles and lengths. deltarf.com 978-927-1060 sales@deltarf.com SMA Adapters Bulkhead Mounted Jack-Jack Adapters (Connects Two Plugs) .500 B A A dia. Figure 1 1 2 2 Dimensions .375 hex Figure 2 (Hermetically sealed, with mounting gasket) Figure B (Non-hermetic, no mounting gasket) Plating A B Max. Panel Mounting Figure Body .875 .875 .875 .555 .575 .575 .190 .250 .250 66 67 67 Gold Gold Passivated Delta P/N Contact Gold Gold Gold ( C) ( C) ( C) 1326000G678-000 1326000G821-000 1326000K821-001 Straight Adapters B B Figure 1 Figure 2 (Straight jack-jack; connects two plugs) (Straight plug-plug; connects two jacks) A A Figure 3 (Straight jack-plug; connects one plug and one jack) Figure 1 1 2 2 3 3 A Plating Dimensions A B Body .500 .500 .875 .875 .720 .720 .218 .218 .218 .218 . -- . -- Gold Passivated Gold Passivated Gold Passivated * (C) in contact plating column indicates captive contact. 20 Delta Electronics Mfg. Corp. deltarf.com Contact Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1328000G000-000 1328000K000-001 1327000G000-000 1327000K000-002 1334000G000-000 1334000K000-000 * See page 208 for mounting dimensions. 978-927-1060 sales@deltarf.com SMA Adapters Right Angle & Tee Adapters A A B B Figure 1 Figure 2 (Right angle plug-jack; connects one plug and one jack) (Right angle plug-plug; connects two jacks) A B Figure 3 (Right angle jack-jack; connects two plugs) B B A A Figure 4 Figure 5 (Tee jack-plug-jack; connects two plugs and one jack) Figure 1 1 2 2 3 3 4 4 5 5 (Tee jack-jack-jack; connects three plugs) Dimensions Plating A B Body .625 .625 .675 .675 .585 .585 .920 .920 1.00 1.00 .585 .585 .675 .675 .585 .585 .630 .630 .590 .590 Gold Passivated Gold Passivated Gold Passivated Gold Passivated Gold Passivated Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1329000G000-000 1329000K000-000 1337000G000-001 1337000K000-001 1395000G000-000 1395000K000-000 1330000G000-000 1330000K000-000 1349000G000-000 1349000K000-000 (C) in contact plating column indicates captive contact. 21 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Connectors General Description Delta E-Line brass SMA connectors are subminiature, 50 impedance connectors with 1 4 "-36 threaded coupling. Their use of brass for body parts provides lower cost while retaining electrical performance similar to that of stainless steel SMA counterparts. If your application does not require the 500 mating cycles of service life provided by stainless steel SMA connectors, E-Line SMAs can fulfill your needs at a reduced cost. For additional economy, nickel-plated bodies can be specified instead of gold plating. E-Line brass SMA connectors can be used with semi-rigid cables in applications up to 18 GHz, or miniature flexible cables up to 12.4 GHz. Our E-Line brass SMA product line is still growing, so please call if you don't see what you need. E-Line Brass SMA Configurations Cable Plugs for Semi-Rigid Cable ................................124 Straight Cable Jacks for Semi-Rigid Cable ................124 Bulkhead Cable Jacks for Semi-Rigid Cable .............124 Panel Cable Jacks for Semi-Rigid Cable .....................124 Cable Plugs for Flexible Cable ......................................125 Straight Cable Jacks for Flexible Cable ......................125 Bulkhead Cable Jacks for Flexible Cable ...................125 Panel Jack Receptacles (Solder Pot Contact) ..........126 Panel Jack Receptacles (Post Contact)..........................126 Panel Jack Receptacles (Tab Contact)............................126 Bulkhead Jack Receptacles ...............................................127 Printed-Circuit Board Receptacles .................................127 Panel Plug Receptacles (Solder Pot Contact) ............128 Panel Plug Receptacles (Post Contact) .........................128 Panel Plug Receptacles (Tab Contact) ...........................128 In-Series Adapters.................................................................129 E-Line Brass SMA Specifications* Plug Interface** Electrical: Nominal Impedance: 50 ohms. Frequency Range: DC-18 GHz (with semi-rigid cable); DC-12.4 GHz (with flexible cable). Voltage Rating: 335-500 volts RMS (dependent on cable). Dielectric Withstanding Voltage : 500-1500 volts RMS (dependent on cable). Insulation Resistance: 5,000 megohms. Reference Plane .135 max. .015/.045 .1808 max. .0355/.0370 .250-36 UNS-2B, .130 min. full thread Contact shoulder projection .000 max; recession .010 max. .250 min. Insulator projection .000 max. .100 max. Jack Interface** .074/.078 .015/.045 .250-36 UNS-2A, .170 min. full thread .218 min. .049 .051 .208 .1810 .216 min. Insulator projection .000 max. Contact projection .000 max; recession .010 max. Reference Plane Materials/Finishes: Insulators: Teflon per ASTM D1710. Male Contacts: Brass per ASTM B16, or Beryllium Copper per ASTM B196. Female Contacts: Beryllium Copper per ASTM B196. Contact Plating : Gold per MIL-DTL-45204. Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50. Other Metal Parts: Brass per ASTM B16 or equivalent; gold plated per MIL-DTL-45204, or nickel plated per AMS-QQ-N-290. All other specifications are in accordance with the latest issues of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL specifications, and interfaces are in accordance with MIL-STD-348. *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available on request. **Some proportions altered to illustrate detail. 22 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Cable Plugs Straight & Right Angle Plugs - For Semi-Rigid Cable B B B A A A Figure 1 Figure 2 (Straight plug--direct solder) Cable Group Figure 13 13 13 13 14 14 1 2 2 3 2 3 Dimensions A B .330 .459 .330 .460 .330 .460 Figure 3 (Straight plug--direct solder) (Right angle plug--direct solder) Plating Body Contact .344 .330 .459 .630 .459 .630 Gold* Gold* Gold* Gold* Gold* Gold* None ( 1) None ( 1) Gold Gold ( C ) Gold Gold ( C ) ( 1) Delta P/N Assembly Procedure/ Trim Code 1301031G003-502 1301031G003-501 1301031G003-500 1305031G003-500 1301025G003-500 1305025G003-500 G/01 G/01 H/03 J/02 H/03 J/02 Cable center conductor used as contact. Straight, Panel & Bulkhead Jacks - For Semi-Rigid Cable .125 .25 .312 max. panel hex B dia. A A (Bulkhead mount, direct solder) dia. typ. A B (CL ) Figure 4 (4-hole flange, direct solder) 1 2 3 4 1 2 3 4 Dimensions A B .500 .850 .500 .625 .500 .850 .500 .625 .335 .500 .340 .481 .335 .500 .340 .481 C .-- .312 .102 .102 .-- .312 .102 .102 .375 .260 Figure 3 13 13 13 13 14 14 14 14 .065 A B (CL ) .375 Fig. .513 C .513 .065 square Cable Group C hex Figure 2 Figure 1 (Straight jack, direct solder) C dia. typ. B (2-hole flange, direct solder) Mounting Figure -- 67 05 92A -- 67 05 92A Plating Body Contact Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold Gold Gold Gold Gold Gold Gold Gold Delta P/N Assembly Procedure/ Trim Code 1308031G003-500 1317031G673-500 1311031G053-500 1311031G923-500 1308025G003-500 1317025G673-500 1311025G053-500 1311025G923-500 H/01 H/04 H/01 H/01 H/01 H/04 H/01 H/01 * * Also available with nickel-plated body--change G in Delta part number to N . * (C) in contact plating column indicates captive contact. * See page 209 for cable groups. * Assembly procedures start on page 210. * See page 208 for mounting dimensions. 23 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Cable Plugs / Jacks Straight & Right Angle Plugs - Crimp Type For Flexible Cable B A B A A B B Figure 1 Figure 2 (Straight plug) Cable Group Figure 5 5 6 6 9 9 10 10 11 11 1 3 1 3 1 3 1 3 2 4 A Dimensions A B .880 .650 .880 .650 .750 .650 .750 .650 .760 .650 Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* (Right angle plug) (Right angle plug) Plating Body Contact .330 .630 .330 .630 .330 .630 .330 .630 .330 .630 Figure 4 Figure 3 (Straight plug) Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1303017G000-500 1307017G001-500 1303013G000-500 1307013G001-500 1303037G000-500 1307037G001-500 1303100G000-500 1307100G001-500 1303038G000-500 1307038G001-500 K/05 L/03 K/05 L/03 K/03 L/03 K/06 L/03 *** L/03 Straight & Bulkhead Jacks - Crimp Type For Flexible Cable A A .250 .250 B dia. Figure 1 max. panel Figure 3 Cable Group Fig. 5 5 6 6 9 9 10 10 11 11 1 3 1 3 1 3 1 3 2 4 .312 .125 C hex .335 .500 .335 .500 .335 .500 .335 .500 .335 .500 . -- .312 . -- .312 . -- .312 . -- .312 . -- .312 max. panel Figure 4 (Bulkhead jack) C (Straight jack) A hex B Dimensions A B .760 .990 .760 .990 .740 .990 .740 .990 .740 .990 Figure 2 (Straight jack) A .125 B dia. Mounting Figure -- 67 -- 67 -- 67 -- 67 -- 67 Plating Body Contact Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold* Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold .312 B hex C hex (Bulkhead jack) Delta P/N 1310017G000-500 1319017G670-500 1310013G000-500 1319013G670-500 1310037G000-500 1319037G670-500 1310100G000-500 1319100G670-500 1310038G000-500 1319038G670-500 Assembly Procedure/ Trim Code K/08 K/10 K/08 K/10 K/08 K/10 K/08 K/10 *** *** * * Also available with nickel-plated body--change G in Delta part number to N . * (C) in contact plating column indicates captive contact. * See page 209 for cable groups. * Assembly procedures start on page 210. * See page 208 for mounting dimensions. 24 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Receptacles Panel Jack Receptacles .197 C .065 dia. typ. B (CL ) typ. .037 A sq. .375 .223 (Solder pot contact--square flange) sq. (Solder pot contact--2-hole flange) dia. .162 dia. .375 B (CL ) typ. A sq. dia. Figure 4 .102 .098 .065 dia. typ. .065 A B (CL ) .375 Tab .005 thick x .050 wide .375 .223 Figure 6 Figure 5 1 2 3 4 5 6 dia. .162 (Post contact--2-hole flange) (Tab contact--2-hole flange) (Tab contact--square flange) Figure .050 .375 .098 Tab .005 thick x .050 wide dia. typ. .223 Figure 3 dia. typ. .157 .065 .102 A B (CL ) (Post contact--square flange) C .375 Figure 2 .157 .065 dia. typ. A dia. .232 .232 C .050 .065 I.D. .050 dia. Figure 1 B (CL ) typ. .037 A B (CL ) I.D. .050 .197 .102 dia. typ. A Dimensions B C Mounting Figure .500 .625 .500 .625 .500 .625 .340 .481 .340 .481 .340 .481 .102 .102 .102 .102 .102 .102 05 92 05 92 05 92 Plating Body Contact Gold* Gold* Gold* Gold* Gold* Gold* Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1313000G051-500 1313000G921-500 1358000G051-500 1358000G921-500 1358000G051-501 1358000G921-501 * * Also available with nickel-plated body--change G in Delta part number to N . * (C) in contact plating column indicates captive contact (mechanical captivation). * See page 208 for mounting dimensions. * All items available with other flange, contact, and insulator configurations. 25 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Receptacles Bulkhead Jack Receptacles A .066 .037 .375 hex B .162 C dia. (I.D.) .050 dia. .050 dia. .162 dia. Figure 1 .500 A dia. hex Figure 2 (Rear mount, solder pot contact, no mounting gasket) A Dimensions B C Max. Panel Mounting Figure Body .670 .660 .620 .450 .157 .118 .375 .075 .000 .125 .125 .125 67 82 82 Gold Gold Gold Figure 1 2 2 .250 C B (Round body, post contact) Plating Contact Delta P/N Gold ( C ) Gold ( C ) Gold ( C ) 1321000G671-500 1321000G821-500 1321000G821-501 Printed-Circuit Board Receptacles .276 .200 (CL ) typ. sq. .020 .050 dia. .058 .040 sq. typ. sq. typ. Figure 1 C .050 .040 .058 .100 .040 .276 .050 C .058 sq. typ. A 1 2 3 4 5 .550 .540 .560 .650 .540 (Right angle jack) .276 sq. .050 .040 sq. typ. .020 sq. B .020 C A .39 dia. .058 B .020 sq. typ. dia. Figure 4 A .200 (CL ) typ. (Right angle bulkhead jack) .200 (CL ) typ. A .39 B .020 sq. typ. Figure 2 max. panel C dia. .058 A .41 C .050 .040 sq. typ. typ. .630 Figure 3 sq. sq. typ. dia. sq. typ. Figure B .276 (Straight jack) .276 .200 (CL ) typ. A .200 (CL ) typ. Figure 5 .330 B (Right angle plug) (Straight plug) Dimensions B .394 .594 .756 .494 .650 Plating C Max. Board Mounting Figure Body Contact .155 .155 .155 .155 .155 .125 .125 .125 .125 .125 PCB05 PCB05 PCB05/82 PCB05 PCB05 Gold* Gold* Gold* Gold* Gold* Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) Delta P/N 1367000G001-500 1369000G001-500 1369000G821-500 1368000G001-500 1370000G001-500 * * Also available with nickel-plated body--change G in Delta part number to N . * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (mechanical captivation). 26 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Receptacles Panel Plug Receptacles C .197 dia. typ. B (CL ) typ. .037 A sq. dia. typ. .223 Figure 1 .232 A sq. .232 .102 dia. .330 .507 Figure 4 .065 .065 .102 .330 .507 1 2 3 4 5 6 .500 .625 .500 .625 .500 .625 .340 .481 .340 .481 .340 .481 Tab .005 thick x .050 wide .223 .330 .507 Figure 6 Figure 5 A dia. typ. A B (CL ) Tab .005 thick x .050 wide Dimensions B .330 .507 (Post contact--2-hole flange) (Tab contact--2-hole flange) (Tab contact--square flange) Figure dia. .098 .098 dia. typ. sq. dia. .162 .223 Figure 3 A .050 dia. (Post contact--square flange) B (CL ) typ. .157 .065 dia. typ. A B (CL ) .162 C .330 .507 Figure 2 .157 .065 C dia. (Solder pot contact--2-hole flange) dia. typ. .050 I.D. .050 .330 .507 dia. (Solder pot contact--square flange) B (CL ) typ. .037 A B (CL ) I.D. .050 .197 .065 .102 .065 Plating C Mounting Figure Body Contact .102 .102 .102 .102 .102 .102 05 92 05 92 05 92 Gold* Gold* Gold* Gold* Gold* Gold* Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1323000G051-500 1323000G921-500 1359000G051-500 1359000G921-500 1359000G051-501 1359000G921-501 * * Also available with nickel-plated body--change G in Delta part number to N . * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact (mechanical captivation). * All items available with other flange, contact, and insulator configurations. 27 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com E-Line Brass SMA Adapters Straight, Right Angle, & Tee Adapters A B dia. A .330 typ. Figure 1 Figure 2 (Straight jack-jack; connects two plugs) (Straight plug-plug; connects two jacks) A A .25 B dia. B .330 Figure 3 Figure 4 (Straight jack-plug; connects one plug and one jack) (Right angle plug-jack; connects one plug and one jack) B B A A Figure 5 Figure 6 (Tee jack-plug-jack; connects two plugs and one jack) Figure 1 2 3 4 5 6 Dimensions A .500 .900 .860 .654 .913 .913 (Tee jack-jack-jack; connects three plugs) Plating B Body Contact .250 .-- .335 .594 .654 .594 Gold* Gold* Gold* Gold* Gold* Gold* Gold Gold Gold Gold Gold Gold Delta P/N ( C) ( C) ( C) ( C) ( C) ( C) 1328000G001-500 1327000G001-500 1334000G001-500 1329000G001-500 1330000G001-500 1338000G001-500 * * Also available with nickel-plated body--change G in Delta part number to N . * (C) in contact plating column indicates captive contact (mechanical captivation). 28 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure A Backnut 1) Trim cable jacket to dimension A. Slide backnut, washer, V-gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. Washer (if supplied) Washer and/or bushing (if supplied) Contact (captive) & insulator or V-Gasket 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with step of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. A Fold braid over 3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear bushing or washer (if supplied), rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. For right angle connectors with access cap, omit this step entirely. Contact (non-captive) Braid Clamp C B Non-captive Contact Captive Contact Solder Solder Washer or bushing (if supplied) 4) Insert prepared cable and hardware into body and tighten backnut. For right angle connectors with access cap, solder center conductor into slot in contact and tighten access cap. Trim Codes For Assembly Procedure A Code A B C Code A B C A/01 .375 (3/8) .047 (3/64) .203 (13/64) A/20 .375 (3/8) .047 (3/64) .172 (11/64) A/02 .375 (3/8) .109 (7/64) .203 (13/64) A/21 .500 (1/2) .313 (5/16) .172 (11/64) A/03 .438 (7/16) .250 (1/4) .188 (3/16) A/22 .375 (3/8) .188 (3/16) .141 (9/64) A/04 .281 (9/32) .047 (3/64) .125 (1/8) A/23 .438 (7/16) .078 (5/64) .172 (11/64) A/05 .313 (5/16) .125 (1/8) .109 (7/64) A/24 .500 (1/2) .094 (3/32) .141 (9/64) A/06 .594 (19/32) .391 (25/64) .156 (5/32) A/25 .438 (7/16) .141 (9/64) .172 (11/64) A/07 .375 (3/8) .047 (3/64) .125 (1/8) A/26 .625 (5/8) .281 (9/32) .250 (1/4) A/08 .281 (9/32) .109 (7/64) .094 (3/32) A/27 .688 (11/16) .281 (9/32) .125 (1/8) A/09 .344 (11/32) .109 (7/64) .094 (3/32) A/28 .656 (21/32) .297 (19/64) .250 (1/4) A/10 .406 (13/32) .109 (7/64) .203 (13/64) A/29 .688 (11/16) .125 (1/8) .313 (5/16) A/11 .500 (1/2) .281 (9/32) .156 (5/32) A/30 .688 (11/16) .469 (15/32) .156 (5/32) A/12 .343 .040 .219 A/31 .700 (21/32) .453 (29/64) .250 (1/4) A/13 .375 (3/8) .125 (1/8) .156 (5/32) A/32 .313 (5/16) .078 (5/64) .188 (3/16) A/14 .355 .090 .188 (3/16) A/33 .250 (1/4) .078 (5/64) .094 (3/32) A/15 .425 .094 (3/32) .259 A/34 .250 (1/4) .062 (1/16) .109 (7/64) A/16 .328 (21/64) .094 (3/32) .188 (3/16) A/35 .837 .575 .150 A/17 .375 (3/8) .109 (7/64) .125 (1/8) A/36 .450 .250 .150 A/18 .375 (3/8) .062 (1/16) .172 (11/64) A/37 .281 .038 .188 A/19 .375 (3/8) .188 (3/16) .094 (3/32) A/38 .281 .069 .156 CAI-A Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Mounting Figures Connector Flanges Panel Cutouts (Panel Mounted Connectors) (Bulkhead Mounted Connectors) P.C. Board Drilling A dia. typ. C dia. typ. D dia. A B (CL ) typ. dia. C (CL ) typ. B (CL ) typ. B A square Figure 4-hole flanges A B 1/2 04 05 07 08 09 10 12 18 26 27 30 32 32A 33 34 36 39 40 45 91 91A Figure 1/2 11 / 16 11 / 16 11 / 16 11 / 16 11 / 16 3/4 1 1 1 1 1 1 1 3 / 32 1 3 / 16 1 3 / 16 1 3 / 16 2 .375 .375 C .360 .340 .500 .500 .500 .500 .500 .531 .718 .718 .718 .718 .718 .718 .812 .906 .906 .906 1.437 .250 .232 .089 .102 #3-56 tap .136 .125 .120 .109 .136 #6-32 tap #4-40 tap .166 .136 .136* .125 .150 #6-32 tap .152 .125 .257 .067 .093 * Countersunk to .245 dia. 51 54 55 57 59 62 63 65 66 67 68 D-Hole A B .755 .630 .630 .557 .505 .442 .407 .380 .319 .255 .195 (PCB traces are shown for illustrative purpose only, and are not representative of actual circuitry.) .723 .598 .583 .531 .473 .410 .362 .348 .292 .236 .176 Coaxial connectors Figure A B C D PCB01 PCB02 PCB03 PCB05 PCB06 PCB07 PCB08 .067 .045 .067 .067 .067 .045 .032 .400 .500 .300 .200 .200 .177 .100 .200 .250 .150 .100 .100 .088 .050 .045 .045 .035 .055 .045 .045 .032 .0625 A D 69 72 75 84 B (CL ) typ. .125 (CL ) Double D-Hole A B .755 .630 .380 .319 dia. typ. dia. typ. dia. B Figure A typ. .692 .536 .341 .278 C (CL ) typ. (PCB traces are shown for illustrative purpose only, and are not representative of actual circuitry.) Figure PCB04 Twinax Connectors A B C .045 .500 .250 D dia. typ. A dia. C B (CL ) A Figure 2-hole flanges Figure A B C D 92 92A 95 .223 .260 .640 .481 .481 1.015 .625 .625 1.30 .102 .102 .125 A1 Delta Electronics Mfg. Corp. Round Hole A 82 89 .255 .380 deltarf.com 978-927-1060 sales@deltarf.com D .045 Cable Groups Delta Cable Groups Group 1 2 3 Cable Group Finder Cable Cables 1B RG-228A 20 RG-6, 6A; M17/2 RG-8, 8A 2A RG-302 22 1C RG-143, 143A, 212, 222; M17/73, /112, /162 RG-9, 9A, B 3A RG-303 23 2A RG-8, 8A, 213; M17/74 RG-10 2B RG-11, 11A; M17/6 3A RG-9, 9A, 9B, 214; M17/75 3B 3C RG-11, 11A 15 2B RG-304 24 RG-316 9A 10 RG-12 15 RG-316DS RG-13A 3B RG-393 4 RG-13A, 216; M17/77 RG-14A 16 RG-400 6A RG-225; M17/127 RG-17A 17 RG-401 12 RG-18A 18 RG-402 13 RG-21, 21A 1A RG-405 14 RG-22, 22A, B 28 M17/2 1B RG-55A, 142, 142A, 223, 400; M17/60, /84, /128 RG-55, 55B 6B M17/6 2B 6B RG-55, 55B, 142B; M17/60, /84 RG-55A 6A M17/15 28 7A RG-59, 59A, 59B, 62, 62A, 62B, 62C, 210; M17/29, /30, /97 RG-58, 58A, C 5 M17/28 5 7B RG-71, 71A, 71B; M17/90 RG-59, 59A, B 7A M17/29 7A RG-62, 62A, B, C 7A M17/30 7A 8A RG-122; M17/54 RG-71, 71A, B 7B M17/45 27 8B RG-180, 180A, 180B, 195; M17/95, /137 RG-108, 108A 27 M17/73 1A 9A RG-174, 188, 188A, 316; M17/152 9B RG-179A, 179B, 187, 187A; M17/94, /136 RG-58, 58A, 58C, 141, 141A; M17/28, /111 6A 9 3C RG-6, 6A Group 1B 5 8 RG-225 RG-5, 5A, 5B, 21, 21A; M17/73, /162 RG-393; M17/127 7 Cable 1A 1A 4 6 Group RG-5, 5A, B RG-115A 19 M17/162 1A RG-118A 20 M17/112 1C 2A RG-122 8A M17/74 Double-Shielded RG-174, 316; M17/152 RG-126 21 M17/75 3A 11 RG-178, 178A, 178B, 196, 196A; M17/93 RG-141, 141A 5 M17/127 3C 12 .250" semi-rigid; RG-401; M17/129 RG-142, 142A 6A M17/77 3B 13 .141" semi-rigid; RG-402; M17/130 6B M17/60 6A 1C 14 .085" semi-rigid; RG-405; M17/133 RG-174 15 RG-10, 12, 215; M17/6, /74 RG-174DS 16 RG-14A, 217; M17/78, /165 17 RG-17A, 218 18 RG-18A, 219 19 RG-115A 20 RG-118A, 228A 21 RG-126 22 10 RG-142B RG-143, 143A M18/84 6A 9A M17/128 6A 10 M17/97 7A RG-178, 178A, B 11 M17/54 8A RG-179A, 179B 9B M17/95 8B RG-180, 180A, B 8B M17/137 8B RG-187, 187A 9B M17/152 9A RG-188, 188A 9A M17/93 11 M17/129 12 RG-195 RG-196, 196A 8B 11 M17/130 13 RG-210 7A M17/133 14 RG-302 RG-212 1C M17/78 16 23 RG-303 RG-213 2A M17/165 16 24 RG-304 RG-214 3A M17/176 30 25 Special 8X cable; contact factory for details. RG-215 15 AT&T 735A 31 RG-217 16 Belden 8281 26 26 Belden 8281 RG-218 17 Belden 9207 29 27 RG-108, 108A; M17/45 RG-219 18 Dearborn 6207 29 28 RG-22, 22A, 22B; M17/15 RG-222 1C IBM 7362211 29 29 Belden 9207; Dearborn 6207; IBM 7362211 RG-223 6A 30 M17/176 31 AT&T 735A A2 Delta Electronics Mfg. Corp. deltarf.com Note: MIL-PRF-39012 QPL connectors have cable groups defined by the MIL specification, not the Delta cable groups shown here. See page 185 for M39012 cable groups. 978-927-1060 sales@deltarf.com Ordering & Warranty Information Warranty We warrant our parts to be free of defects and workmanship for one year from purchase. During that time we will repair or replace (at our option) er's, or military installation costs. No other warranties apply, and no other liability may be assumed or extended by representatives or distributors. The terms of the applicable warranty or warranties, as the case may be, as set forth herein are the sole and exclusive warranty terms that shall have any any product order, resulting from the quotation and such terms and in lieu of all other warranties, expressed or implied, including the implied Returns Returns will be accepted only with a Return Authorization number issued by Delta, and are subject to inspection and acceptance upon arrival. Restocking charges will be determined prior to issusnce of Return Authorization. All claims for shortages must be made within 30 days of receipt by customer. Ordering Information Order changes, cancellation, or termination will be accepted only with written approval from Delta Electronics Manufacturing. or to sale. Copyright, Trademarks, & Patents Entire contents copyright 2017, Delta Electronics Manufacturing Corporation. Reproduction rights are hereby granted for, and sp urchasing procedures, by Delta customers only. Heli-Grip(R) , PressMount(R) , and Global Manufacturer logo are trademarks. The Heli-Grip design is covered by U.S. and foreign patents . Delta Electronics Manufacturing Corporation 416 Cabot Street, P.O. Box 53 Beverly, MA 01915 FSCM/CAGE 00795 A3 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Delta Electronics Mfg. Corp. www.deltarf.com 978-927-1060 sales@deltarf.com PO Box 53 416 Cabot St. Beverly, MA 01915 Assembly Procedures Assembly Procedure B Crimp Sleeve Contact (captive) 1) Trim cable per chart. Slide crimp sleeve back onto cable. or Contact (non-captive) A B C 2) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Solder contact onto center conductor; back of contact flush with trimmed end of cable dielectric (omit this step for right angle connectors with access caps). Flare cut end of braid slightly by rotating dielectric. Solder 3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. a) For captive contact connectors, push cable in until contact snaps into insulator. b) For noncaptive contact connectors, push cable in until cable dielectric bottoms in connector. c) For right angle or tee connectors with access caps, push cable in until end of braid touches connector body shoulder, and cable center conductor rests in contact slot. Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex die sizes). For right angle or tee connectors with access caps: Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Trim Codes For Assembly Procedure B Code A B C Code A B C B/01 .320 .470 .140 B/20 .250 .375 .156 B/02 .422 .578 .172 B/21 .425 .550 .156 B/03 .406 .500 .187 B/22 .375 .500 .156 B/04 .285 .505 .140 B/23 .281 .469 .125 B/05 .335 .460 .140 B/24 .250 .700 .109 B/06 .187 .437 .219 B/25 .343 .775 .125 B/07 .422 .610 .156 B/26 .343 .437 .109 B/08 .422 .562 .219 B/27 .313 .437 .187 B/09 .313 .610 .203 B/28 .219 .271 .078 B/10 .280 .436 .187 B/29 .200 .320 .060 B/11 .430 .542 .156 B/30 .500 .650 .219 B/12 .300 .434 .156 B/31 .350 .840 .150 B/13 .300 .447 .156 B/32 .175 .260 .095 B/14 .420 .645 .187 B/33 .195 .270 .045 B/15 .300 .420 .120 B/34 .150 .250 .105 B/16 .312 .609 .125 B/35 .195 .280 .170 B/17 .250 .500 .156 B/36 .150 .325 .090 B/18 .437 .562 .109 B/37 .195 .295 .075 B/19 .343 .437 .156 B/38 .150 .225 .095 B/39 .250 .300 .135 CAI-B Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure C Backnut Contact (captive) & insulator Washer or Gasket Trim Codes Braid Clamp Fold braid over Code A B C C/01 .656 (21/32) .141 (9/64) .250 (1/4) C/02 .500 (1/2) .125 (1/8) .250 (1/4) C/03 .450 .136 .187 C/04 .375 (3/8) .109 (7/64) .125 (1/8) C/05 .375 (3/8) .062 (1/16) .250 (1/4) C/06 .500 (1/2) .188 (3/16) .125 (1/8) C/07 .575 .438 .094 C/08 .625 (5/8) .141 (9/64) Contact (non-captive) A 1) Trim cable jacket to dimension A. Slide backnut, washer, gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with edge of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. C B Non-captive Solder 3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. Captive .219 (7/32) 4) Insert prepared cable and hardware into body and tighten backnut. For right angle connectors with access cap, solder cable center conductor to slot in contact and tighten access cap. Assembly Procedure D Backnut Contact (captive) & insulator Washer or Armor Clamp V-Gasket Contact (non-captive) A Braid Clamp Fold braid over C B A B C D/01 .375 (3/8) .047 (3/64) .250 (1/4) D/02 .500 (1/2) .188 (3/16) .219 (7/32) D/03 .344 (11/32) .047 (3/64) .219 (7/32) D/04 .313 (5/16) .047 (3/64) .172 (11/64) D/05 .625 (5/8) .281 (9/32) .250 (1/4) D/06 .313 (5/16) .062 (1/16) .109 (7/64) CAI-C-D 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with edge of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. Non-captive Trim Codes Code 1) Slide armor clamp over cable. Push armor back to expose cable end. Slide backnut, washer (if supplied), gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. Trim cable jacket to dimension A. Solder 3) Assemble rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. Captive 4) Insert prepared cable and hardware into body and tighten backnut. Trim armor to fit between armor clamp and braid clamp. Tighten armor clamp. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure E Backnut C B A Contact/Insulator/ cone grip assembly 1) Slide backnut onto cable as shown. Trim cable to dimensions A and B as shown. Slit jacket to dimension C in two places, 180 apart. Trim Codes Code A B C E/01 .250 (1/4) .141 (9/64) .313 (5/16) E/02 .219 (7/32) .063 (1/16) .250 (1/4) E/03 .250 (1/4) .031 (1/32) .250 (1/4) 2) Slide cone/insulator/contact assembly under braid until braid is flush with shoulder. Solder contact to center conductor. Solder 3) Insert prepared cable and hardware into body; tighten assembly by holding nut stationary and turning body. Assembly Procedure F Backnut Washer Contact (captive), insulator, & bushing B or Trim Codes V-Gasket Code A B F/01 .250 (1/4) .219 (7/32) F/02 .250 (1/4) .172 (11/64) F/03 .188 (3/16) .188 (3/16) F/04 .109 (7/64) .265 (17/64) F/05 .156 (5/32) .250 (1/4) F/06 .219 (7/32) .250 (1/4) F/07 .156 (5/32) .172 (11/64) F/08 .109 (7/64) .219 (7/32) Solder Ferrule Contact (non-captive) A 1) Trim cable per chart. Slide backnut, washer, v-gasket, and solder ferrule onto cable. Trimmed end of cable jacket should bottom on step in solder ferrule. Solder Captive Solder Solder 2) Solder ferrule to cable jacket as shown. Retrim cable dielectric to proper length if it has extruded from soldering heat. Slide bushing and rear insulator over cable dielectric if captive contact. Solder contact onto center conductor; back of contact flush with trimmed end of cable dielectric. Non-captive 3) Insert prepared cable and hardware into body and tighten backnut. CAI-E-F Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure G Body Coupling nut Gasket `C' ring Soft solder all around with end of body B A Trim Codes Code A B G/01 .090 70-90 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Soft solder cable jacket to body, making sure that end of cable is flush with end of body. After solder joint has cooled, retrim any protruding dielectric flush with end of body. 3) Assemble `C' ring and gasket to body. Compress `C' ring and slide body assembly into coupling nut until ring is seated in groove. Assembly Procedure H Body assembly Soft solder all around Contact A Trim Codes Code A H/01 H/02 H/03 H/04 .090 .060 .115 .150 with insulator .015" 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Solder contact to center conductor, fixturing to maintain gap as shown. Remove any excess solder from outside of contact. 3) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Plug body assembly and contact shown; procedure is identical for jack connectors. Assembly Procedure I Body assembly Soft solder all around with insulator B A Trim Codes Code A B I/01 .090 70-90 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Plug body assembly and contact shown; procedure is identical for jack connectors. Cable Positioner .250-36 UNS-2A thread For .085" Cable: P/N 63-10072-2 For .141" Cable: P/N 63-10072-1 CAI-G-I .375 .50 Using this positioner in the final step of assembly procedure H or I (for plugs only) will ensure that the contact and insulator are retained in the proper position to meet MIL-C-39012 requirements. The positioner should be screwed finger-tight into the mating end of the connector (as shown at right) before the cable jacket is soldered to the body assembly. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure J Press cap in until seated Cap Insulator (if supplied) Solder center conductor to contact Soft solder all around Trim Codes Code A B J/01 .109 .047 J/02 .059 .039 J/03 .059 .079 J/04 .050 .059 B A 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Soft solder cable jacket to body, making sure that end of cable is flush with step in body. Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Assembly Procedure K Heat-shrink tubing (if supplied) Crimp or solder sleeve 1) Trim cable per chart. Slide crimp (or solder) sleeve and heat-shrink tubing (if supplied) back onto cable. A Solder hole (for solder-type connectors only) B C Solder .015" Cable dielectric end Heat-shrink tubing Crimp or solder sleeve 2) Solder contact onto center conductor, fixturing to maintain gap as shown. Flare cut end of braid slightly by rotating dielectric. 3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. Push cable in until cable dielectric bottoms in connector. Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body and sleeve through hole in sleeve.) Slide heat-shrink tubing into place and shrink with hot-air gun. Plug body assembly and contact shown; procedure is identical for jack connectors. Trim Codes CAI-J-K Code A B C Code A B C K/01 .250 .270 .110 K/07 .220 .290 .135 K/02 .200 .270 .140 K/08 .420 .620 .090 K/03 .225 .290 .110 K/09 .090 .135 .160 K/04 .225 .330 .110 K/10 .250 .415 .115 K/05 .250 .330 .110 K/11 .250 .400 .150 K/06 .250 .315 .095 K/12 .282 .390 .140 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure L Trim Codes Code A B C L/01 .250 .438 .109 L/02 .125 .219 .109 L/03 .234 .344 .109 L/04 .195 .270 .050 L/05 .095 .155 .050 L/06 .281 .390 .070 Crimp or solder sleeve 1) Trim cable per chart. Slide crimp (or solder) sleeve onto cable. Solder hole (for solder-type connectors) A B C Press cap in until seated 2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push cable in until end of braid touches connector body shoulder and center conductor rests in contact slot. Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body and sleeve through hole in sleeve.) Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Cap Insulator (if supplied) Solder center conductor to contact Crimp or solder sleeve Assembly Procedure M Backnut Cable Trim Codes Code A B C M/01 .281 .390 .140 1) Trim cable per chart. Slide crimp (or solder) sleeve and backnut onto cable. Crimp or solder sleeve Solder hole (for solder-type connectors) A B C Clamp Contact Insulator 2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is flush with front of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor, with contact shoulder flush with front of insulator. Solder contact to center conductor. Solder 3) Slide crimp sleeve forward until flush with clamp shoulder; crimp as close to shoulder as possible. (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body and sleeve through hole in sleeve.) 4) Insert prepared cable into back of body. Slide nut forward and tighten to 12-15 inch-pounds. Crimp Tools For Flexible Cable M22520/5-01 * For Delta cable groups. See MIL-PRF-39012 specifications for dies sizes used with M39012 cable groups. CAI-L-M Frame only--P/N M22520/5-01 --Use with interchangeable dies listed below. Cable Group* Hex Die Size Die Set P/N Closure 2, 3, 4 .429 hex, .400 wide M22520/5-61 A 5, 6 .213 hex, .400 wide M22520/5-19 B 7 .255 hex, .400 wide M22520/5-19 A 9 .128 hex, .400 wide M22520/5-35 B 10 .151 hex, .400 wide M22520/5-37 B 11 .105 hex, .400 wide M22520/5-33 B Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com