3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series
Physical
Electrical
Environmental
Insulation
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Gray or Black
Contact
Material: Copper Alloy
Plating
Underplating: 50 μ″ [ 1.27 μm ] Min. Nickel
Wiping Area: (See Ordering Information)
Termination Area: (See Ordering Information)
Marking: Part Number and Date Code
Contact Resistance: 20 mΩ Max.
Current Rating: 3.0 A @ 30°C T-rise above ambient
Insulation Resistance: 1 x 10³ MΩ min. at 500 VDC
Withstanding Voltage: 1 x 10³ VAC for 1 minute
Temperature Rating: -55°C to +125°C
Process Temperature Rating: 260°C per J-STD-020C
Moisture Sensitivity Level:1 (per J-STD-020C)
TS-1132-B
Sheet 1 of 4
• Multi-pin count socket for VME, VXI
and Multibus II daughter cards
• Early mate late break (EMLB) grounding
contacts for hot swapping
• Expanded pin counts
• Optional retention clips
• Mates with C-form and R-form sockets
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: March 26, 2007
UL File No.: E68080
DISCONTINUED
Replaced by
Tech Sheet 2305
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
SECTION X-X
RRXL
RRX
.150
3.81 .120
3.05
W ITHOUT RETENTION CLIP
'B' STYLE RETENTION CLIP
FOR .062" PCB THICKNESS
'A ' S T YL E R ET E N T IO N C LIP
FOR .062" AND .093" PCB
THICKNESS
"X"
"X"
D
A
PIN A1
.343
8.71 .433
11.00
E
.100
2.54
.100
2.54
.100
2.54
.502
12.74
.059
1.50
C
.492
12.50
.195
4.95
.025
0.64
.052
1.32
.252
6.40
.374
9.50
B
SRX
FOR SPECIAL PIN ARRANGEMENTS
CONTACT 3M SALES REPRESENTATIVES
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series
.0 .00 .000
inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference
Onl
y
Tolerance Unless Noted
[mm]
Inch
TS-1132-B
Sheet 2 of 4
Ordering Information DIN - XXX CP X - XXX - XXXX
Contact Quantity
See Table 1
Plating and Insulator Color Options:
See Table 3
Contact Loading Pattern:
A = A Row only
B = Rows A & C Filled
C = Rows A, B, & C Filled
D = Rows A & B Filled
E = B Row only
Termination Options:
See Table 2
DISCONTINUED
Replaced by
Tech Sheet 2305
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series
TS-1132-B
Sheet 3 of 4
DIM "C" in (mm) Comments
0.114 (2.90) No retention clips
0.180 (4.57) No retention clips
0.114 (2.90) With "A" style retention clips
0.180 (4.57) With "A" style retention clips
0.114 (2.90) With "B" style retention clips
0.180 (4.57) With "B" style retention clips
RR1L
SR2
Table 2
SOLDER TERMINATION OPTION No
SR1
RR2L
PRESS-FIT TERMINATION OPTION No
RR1
NA
RR2
Contact
Quantity Load Pattern
016 A2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10]
032 B2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10]
048 C2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10]
032 D2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10]
016 E2.100 [53.34] 1.754 [44.55] 1.900 [48.26] 1.500 [38.10]
032 A3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74]
064 B3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74]
096 C3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74]
064 D3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74]
032 E3.700 [93.98] 3.354 [85.19] 3.500 [88.90] 3.100 [78.74]
040 A4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06]
080 B4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06]
120 C4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06]
080 D4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06]
040 E4.500 [114.30] 4.154 [105.51] 4.300 [109.22] 3.900 [99.06]
050 A5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46]
100 B5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46]
150 C5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46]
100 D5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46]
050 E5.500 [139.70] 5.154 [130.91] 5.300 [134.62] 4.900 [124.46]
Table 1
AB D E
Plating
Suffix
Plastic
Color
Solder Tail
Terminations
TG30 Gray (RIA E3 & C2 apply)
TR Gray (RIA E3 & C2 apply)
MH Black (RIA E1 & C1 apply)
HS Black (RIA E1 & C1 apply)
KT Black (RIA E1 & C1 apply)
0.76 µm [30 µ"] Min. Au Contact Area
5.08 µm [200 µ"] Min. Reflowed Matte Whisker
Mitigating Sn Term. Area
1.27 µm [50 µ"] Min. Ni all over
0.08 µm [3 µ"] Min. Au over 0.18 µm
[7 µ"] Min. PdNi Contact Area
5.08 µm [200 µ"] Min. Reflowed Matte Whisker
Mitigating Sn Term. Area
1.27 µm [50 µ"] Min. Ni all over
0.25 µm [10 µ"] Min. Au Contact Area
5.08 µm [200 µ"] Min. Reflowed Matte Whisker
Mitigating Sn Term. Area
1.27 µm [50 µ"] Min. Ni all over
Table 3
Plating Composition
0.76 µm [30 µ"] Min. Au Contact Area
2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
0.08 µm [3 µ"] Min. Au Contact Area
0.18 µm [7 µ"] Min. PdNi Contact Area
2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
DISCONTINUED
Replaced by
Tech Sheet 2305
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ DIN C-Form Plug
.100″ Standard Mount, Right Angle, Solder Tail Termination DIN 41612 Series
TS-1132-B
Sheet 4 of 4
C
B
1
lO0.004 MABC
lO0.006 MABC
DIM "F"O
PLATED THRU HOLE
0.100
2.54 TYP.
E
0.200
5.08
.100
2.54
A
.100
2.54
D
O.110 ±.004
2.79 ±0.10
DRILLED HOLE. 2X
RECOMMENDED PCB HOLE PATTERN
.209
5.31
2
X
A
-C-
-B-
HOLE
DRILLED HOLE DIA.
in (mm)
Cu THICKNESS
in (mm)
OSP ENTEK
Thickness (µin) µm
Electrolitic Au
Thickness µin (µm)
Immersion Ag
Thickness µin (µm)
SnPb THICKNESS
in (mm) FINISHED DIA. in (mm)
"F" 0.041 - 0.049 (1.04 - 1.24)
HOLE
DRILLED HOLE DIA.
in (mm)
Cu THICKNESS
in (mm)
OSP ENTEK
Thickness µin (µm)
Electrolitic Au
Thickness µin (µm)
Immersion Ag
Thickness µin (µm)
Immersion Matte Sn
Thickness
µin (µm) FINISHED DIA. in (mm)
"F" 0.041 - 0.049 (1.04 - 1.24)
HOLE PLATING TABLE For TG and TR (Solder Tail Leads)
HOLE PLATING TABLE For MH, HS and KT (Solder Tail Leads)
DISCONTINUED
Replaced by
Tech Sheet 2305
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-A
DISCONTINUED
Replaced by
Tech Sheet 2305
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does not contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part does contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for
any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Name and Content of Hazardous Substances or Elements
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects RIA-2217-A
© 3M 2007
DISCONTINUED
Replaced by
Tech Sheet 2305