MT9M032
Features
• DigitalClarity® imaging technology
• State-of-the-art, 2.2μm pixel design
• High-definition video capture (1280H x 720V, 60 fps
progressive)
• Parallel data interfaces
• Available in Bayer color or monochrome versions
• Designed to work with long-range zoom lenses used
in surveillance cameras
• Auto black-level calibration
• Low power consumption
Specifications
Imaging Array
• Optical Format: 1/4.5-inch
• Active Array: 1472(H) x 1096(V)
• Imaging Area: 3.24mm(H) x 2.41mm(V)
Speed/Output
• Frame Rate: 60 fps at 1280(H) x 720(V)
30 fps at 1440(H) x 1080(V)
• Data Rate: 99 Mp/s
• Master Clock: 49.5 MHz
• Data Format: 12-bit parallel
Sensitivity
• Pixel Size: 2.2μm x 2.2μm
• Dynamic Range: 70.1dB
• Responsivity: 1.4 V/lux-sec (550nm)
Power
• Supply: Analog: 2.6–3.1V
Digital: 1.7–1.9V
I/O: 2.6–3.1V
• Consumption: 364.6mW at 2.8V
Temperature Range
• Operating: –30°C to +70°C
Package: 48-pin CLCC
Block Diagram
DOUT[11:0]
FRAME_VALID
LINE_VALID
PIXCLK
SCLK
SDATA
RESET_BAR
EXTCLK
Serial
Interface
Array Control
Pixel Array
1600H x 1152V
Data Path
Analog Signal Chain
aptina.com
Products are warranted only to meet Aptina’s production data sheet specifications. Products and
specifications are subject to change without notice. Aptina, the Aptina logo, and DigitalClarity
are the property of Micron Technology, Inc. All other trademarks are the property of their respec-
tive owners. ©2008 Micron Technology, Inc. All rights reserved. 02/22/08 EN.