The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained. Cables with different current capacities can be mixed in one case ID terminal (AWG24, 26, 28) Crimping contact (AWG20 to 30) 1 By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case. 2 After connection, the contact can be replaced in excellent maintainability. 3 Because the insulation displacement area is protected by the case, high reliability can be assured. 4 Since the insulation displacement process can be performed only by replacing the applicator of the existing crimping machine, no expensive machine for insulation displacement is required. 2. Potting Header Available Figure 1 Potting status The high profile header is also available, corresponding to the board potting process (sealed with resin) as waterproof measures. 3. Broad Variations The single row and double row contacts are aligned for "Board to Cable" and "In-line" series, respectively, while standard tin and gold plating products are available. (Refer to the applicable combination pattern on next page.) Applications Figure 2 Business equipment, particularly including the copy machine and printer B183 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. BApplicable Combination K Single Row Type Socket (Cable Side) DF1B-*S-2.5R Straight Through hole Type Pin header DF1B(Z)-*P-2.5DSA Right angle Through hole Type Pin header DF1B(Z)-*P-2.5DS Panel Mount Type In-line plug (Cable side) DF1BA-*EP-2.5RC K Double Row Type Socket (Cable Side) DF1B-*DS-2.5RC Straight Through hole Type Pin header DF1B(Z)-*DP-2.5DSA Right angle Through hole Type Pin header DF1B(Z)-*DP-2.5DS Panel Mount Type In-line plug (Cable side) DF1BA-*DEP-2.5RC In-line Connection Product (Cable to Cable Connection) : Full Lock Type K Single Row Type Socket (Cable Side) DF1B-*ES-2.5RC In-line plug (Cable side) DF1B-*EP-2.5RC K Double Row Type Socket (Cable Side) DF1B-*DES-2.5RC B184 In-line plug (Cable side) DF1B-*DEP-2.5RC The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Product Specifications Current rating Rating Cable Size (Note1) Voltage rating AWG 20 to 24 : 3A Operating Temperature Range -35 to +85c (Note2) AWG 26 : 2A Operating Moisture Range -40 to 80% AWG 28 : 1A AWG 30 : 0.5A Storage Temperature Range -10 to +60c (Note3) Storage Moisture Range -40 to 70% (Note3) 250V AC UL CSA Safety File No. UL : E52653 CSA : LR95109 UL-CSA Safety Standard Standardized Value AWG 20 to 22: 3A Current rating Rating Cable Size (Note1) AWG 24 to 28: 1A AWG 30 Voltage rating : 0.5A 30V AC Item Specification Condition 1. Insulation Resistance 1000M ohms Min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 30m ohms Max 100mA 4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf) Measure at the square steel pin of 0.6350.002mm 5. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 402c and humidity of 90% to 95% 7. Temperature Cycle 8. Operating Life 9. Resistance to Soldering heat Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min. Contact resistance: 30m ohms max. No deformation of components affecting performance. (-55c: 30 minutes 5 to 35c: 10 minutes (-85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles Tin plating : 30 cycles Gold plating : 50 cycles Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds Note 1: Current rating of header is 3A. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Part Socket Insulator Polyamide White ID Contact for Socket Contact Phosphor copper Tin plated or gold plated Crimping Contact for Socket Pin Header In-line Plug Material Finish Contact Phosphor copper Tin plated or gold plated Insulator Polyamide White Contact Brass Tin plated or gold plated Insulator Polyamide White Remarks UL94V-0 ------ ------ UL94V-0 ------ UL94V-0 ID Contact for In-line Plug Contact Phosphor copper Tin plated or gold plated ------ Crimping Contact for In-line Plug Contact Phosphor copper Tin plated or gold plated ------ B185 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. Ordering Information KConnector DF1B - * S 2.5 RC q q Series Name w e t r Contact Pitch: 2.5mm e Connector Type : DF 1B w Number of Contacts Single Row : 2 to 16, 18, 20 Double Row : 4 to 30, 34, 40 KSocket ID Contact t Contact Type S : Single row socket DS : Double row socket RC P : Single row pin header DSA : Straight through hole DP : Double row pin header ES : Single row in-line socket DS : ID/crimping socket (Note) : Right angle through hole Note: The single row socket DF1B-*S-2.5R DES : Double row in-line socket only adds "R" to the tail, which has EP : Single row in-line plug the same meaning as "RC". DEP : Double row in-line plug DF1B - R 24 F A q w R e r e Packaging Type q 1. Connection Type Blank : Bag : ID w Applicable Cable Size F : Reel r Plating Type 24 : AWG24 26 : AWG26 Blank : Tin plated 28 : AWG28 A KPlug ID Contact : Gold plated DF1B - 24 P R F q w R 24 : AWG24 : ID Blank : Bag 28 : AWG28 w Connector Type KCrimping Contact r r Packaging Type 26 : AWG26 P e e Connection Type q Applicable Cable Size F : Reel : Plug DF1B - 2428 SCF A q q Applicable Cable Size w e e Plating Type 2022 : AWG20 to 22 Blank : Tin plating 2428 : AWG24 to 28 A : Gold plated B : Gold plated (Note) 28 : AWG30 w Packaging Type B186 r Note: In case of the socket contact, SCF : Socket Contact/Reel "A" is attached to the tail of SC the product name. In case of : Socket Contact/Bag PCF : Plug Contact/Reel the plug contact, "B" is PC attached thereto. : Plug Contact/Bag The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Single Row Socket Photo: Contact Inserted Unit: mm Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A DF1B- 2S-2.5R 541-0200-6 2 5 DF1B- 3S-2.5R 541-0201-9 3 7.5 2.5 DF1B-11S-2.5R 541-0209-0 11 27.5 25 5 DF1B-12S-2.5R 541-0210-0 12 30 27.5 DF1B- 4S-2.5R 541-0202-1 4 10 DF1B- 5S-2.5R 541-0203-4 5 12.5 10 7.5 DF1B-13S-2.5R 541-0211-2 13 32.5 30 DF1B-14S-2.5R 541-0212-5 14 35 32.5 DF1B- 6S-2.5R 541-0204-7 6 15 12.5 DF1B-15S-2.5R 541-0213-8 15 37.5 35 DF1B- 7S-2.5R 541-0205-0 7 17.5 15 DF1B-16S-2.5R 541-0214-0 16 40 37.5 DF1B- 8S-2.5R 541-0206-2 8 DF1B- 9S-2.5R 541-0207-5 9 20 17.5 DF1B-18S-2.5R 541-0215-3 18 45 42.5 22.5 20 DF1B-20S-2.5R 541-0216-6 20 50 47.5 DF1B-10S-2.5R 541-0208-8 10 25 22.5 RoHS Yes B RoHS Yes Note1: The quantity at the specific No."None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note2: The 2 contact connector contains the convex portion to prevent mis-insertion in the center at one point, which is different from the above figure. The 3 to 7 contacts connectors have the area at both ends. Double Row Socket Photo: Contact Inserted. Unit: mm Part Number CL No. Number of Contacts Part Number CL No. Number of Contacts DF1B- 4DS-2.5RC 541-0648-0 4 2.5 DF1B-22DS-2.5RC 541-0606-0 DF1B- 6DS-2.5RC 541-0649-3 6 DF1B- 8DS-2.5RC 541-0650-2 8 10 5 DF1B-24DS-2.5RC 12.5 7.5 DF1B-26DS-2.5RC DF1B-10DS-2.5RC 541-0600-4 10 15 DF1B-12DS-2.5RC 541-0601-7 12 17.5 12.5 DF1B-14DS-2.5RC 541-0602-0 14 20 DF1B-16DS-2.5RC 541-0603-2 16 22.5 17.5 DF1B-18DS-2.5RC 541-0604-5 18 25 DF1B-20DS-2.5RC 541-0605-8 20 27.5 22.5 A B 7.5 RoHS 10 15 20 Yes A B 22 30 25 541-0607-3 24 32.5 27.5 541-0608-6 26 35 30 DF1B-28DS-2.5RC 541-0609-9 28 37.5 32.5 DF1B-30DS-2.5RC 541-0610-8 30 40 35 DF1B-34DS-2.5RC 541-0612-3 34 45 40 DF1B-36DS-2.5RC 541-0613-6 36 47.5 42.5 DF1B-40DS-2.5RC 541-0615-1 40 52.5 47.5 RoHS Yes Note1: The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag. Note2: The 4 contact connector contains the convex portion to prevent miss-insertion in the center at one point, which is different from the above figure. B187 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. Single Row Straight Pin Header +0.1 KBoard Through-hole Diameter:O1.1+0 Unit: mm Tin plated Gold plated Part Number CL No. Part Number CL No. Number of Contacts A B DF1BZ- 2P-2.5DSA 541-2000-8 DF1B- 2P-2.5DSA(01) 541-0225-7-01 2 2.5 7.5 DF1BZ- 3P-2.5DSA 541-2001-0 DF1B- 3P-2.5DSA(01) 541-0226-0-01 3 5.0 10.0 DF1BZ- 4P-2.5DSA 541-2002-3 DF1B- 4P-2.5DSA(01) 541-0227-2-01 4 7.5 12.5 DF1BZ- 5P-2.5DSA 541-2003-6 DF1B- 5P-2.5DSA(01) 541-0228-5-01 5 10.0 15.0 DF1BZ- 6P-2.5DSA 541-2004-9 DF1B- 6P-2.5DSA(01) 541-0229-8-01 6 12.5 17.5 DF1BZ- 7P-2.5DSA 541-2005-1 DF1B- 7P-2.5DSA(01) 541-0230-7-01 7 15.0 20.0 DF1BZ- 8P-2.5DSA 541-2006-4 DF1B- 8P-2.5DSA(01) 541-0231-0-01 8 17.5 22.5 DF1BZ- 9P-2.5DSA 541-2007-7 DF1B- 9P-2.5DSA(01) 541-0232-2-01 9 20.0 25.0 DF1BZ-10P-2.5DSA 541-2008-0 DF1B-10P-2.5DSA(01) 541-0233-5-01 10 22.5 27.5 YES DF1BZ-11P-2.5DSA 541-2009-2 ------ ------ ------ DF1BZ-12P-2.5DSA 541-2010-1 DF1B-12P-2.5DSA(01) 541-0235-0-01 12 DF1BZ-13P-2.5DSA 541-2011-4 ------ ------ ------ DF1BZ-14P-2.5DSA 541-2012-7 DF1B-14P-2.5DSA(01) 541-0237-6-01 14 32.5 37.5 DF1BZ-15P-2.5DSA 541-2013-0 DF1B-15P-2.5DSA(01) 541-0238-9-01 15 35.0 40.0 DF1BZ-16P-2.5DSA 541-2014-2 DF1B-16P-2.5DSA(01) 541-0239-1-01 16 37.5 42.5 DF1BZ-18P-2.5DSA 541-2015-5 DF1B-18P-2.5DSA(01) 541-0240-0-01 18 42.5 47.5 -- -- 27.5 32.5 -- -- 20 541-0241-3-01 541-2016-8 47.5 52.5 DF1BZ-20P-2.5DSA DF1B-20P-2.5DSA(01) Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.) If needed, please order the product per bag. Note 2.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.In addition, the 4 to 7 contact connectors have two concave portions at both ends. B188 RoHS The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Single Row Right Angle Pin Header +0.1 K Board Through-hole Diameter:O1.1+0 Unit: mm Tin plated Gold plated Part Number CL No. Part Number CL No. Number of Contacts A B DF1BZ- 2P-2.5DS CL541-2034-0 DF1B- 2P-2.5DS(01) 541-0225-7-01 2 2.5 7.5 DF1BZ- 3P-2.5DS CL541-2035-2 DF1B- 3P-2.5DS(01) 541-0226-0-01 3 5.0 10.0 DF1BZ- 4P-2.5DS CL541-2036-5 DF1B- 4P-2.5DS(01) 541-0227-2-01 4 7.5 12.5 DF1BZ- 5P-2.5DS CL541-2037-8 DF1B- 5P-2.5DS(01) 541-0228-5-01 5 10.0 15.0 DF1BZ- 6P-2.5DS CL541-2038-0 DF1B- 6P-2.5DS(01) 541-0229-8-01 6 12.5 17.5 DF1BZ- 7P-2.5DS CL541-2039-3 DF1B- 7P-2.5DS(01) 541-0230-7-01 7 15.0 20.0 DF1BZ- 8P-2.5DS CL541-2040-2 DF1B- 8P-2.5DS(01) 541-0231-0-01 8 17.5 22.5 DF1BZ- 9P-2.5DS CL541-2041-5 DF1B- 9P-2.5DS(01) 541-0232-2-01 9 20.0 25.0 DF1BZ-10P-2.5DS CL541-2042-8 DF1B-10P-2.5DS(01) 541-0233-5-01 10 22.5 27.5 YES DF1BZ-11P-2.5DS CL541-2043-0 ------ ------ ------ DF1BZ-12P-2.5DS CL541-2044-3 DF1B-12P-2.5DS(01) 541-0235-0-01 12 DF1BZ-13P-2.5DS CL541-2045-6 ------ ------ ------ DF1BZ-14P-2.5DS CL541-2046-9 DF1B-14P-2.5DS(01) 541-0237-6-01 14 32.5 37.5 DF1BZ-15P-2.5DS CL541-2047-1 DF1B-15P-2.5DS(01) 541-0238-9-01 15 35.0 40.0 DF1BZ-16P-2.5DS CL541-2048-4 DF1B-16P-2.5DS(01) 541-0239-1-01 16 37.5 42.5 DF1BZ-18P-2.5DS CL541-2049-7 DF1B-18P-2.5DS(01) 541-0240-0-01 18 42.5 47.5 -- RoHS -- 27.5 32.5 -- -- 20 47.5 52.5 541-0241-3-01 Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure. DF1BZ-20P-2.5DS CL541-2050-6 DF1B-20P-2.5DS(01) B189 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. Single Row Straight Pin Header for Potting B Tube Size Unit: mm Part Number CL No. Number of Contacts A B 7.5 Tube Package Quantity RoHS 64pieces DF1BD- 2P-2.5DSA(**) 541-0800-3-** 2 2.5 DF1BD- 3P-2.5DSA(**) 541-0801-6-** 3 5 10 48 DF1BD- 4P-2.5DSA(**) 541-0802-9-** 4 7.5 12.5 38 DF1BD- 5P-2.5DSA(**) 541-0803-1-** 5 10 15 32 DF1BD- 6P-2.5DSA(**) 541-0804-4-** 6 12.5 17.5 27 DF1BD- 7P-2.5DSA(**) 541-0805-7-** 7 15 20 24 DF1BD- 8P-2.5DSA(**) 541-0806-0-** 8 17.5 22.5 21 DF1BD- 9P-2.5DSA(**) 541-0807-2-** 9 20 25 19 DF1BD-10P-2.5DSA(**) 541-0808-5-** 10 22.5 27.5 17 Yes +0.1 K Board Positioning Boss Hole Diameter:O1.1+0 +0.1 K Board Through-hole Diameter:O1.1+0 [Specific No.] -* *, (* *) (05): Tin plated (25) : Tin plated, tube packaging Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per pack. Note 2.Please order the tube packaging products, multiplying the packaging quantity (pieces). Note 3.The 2 and 3 contact connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure.In addition, the 4 to 7 contacts connectors have two concave portions at both ends. BApplicable Potting Thickness : 6mm Potting status B190 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Double Row Straight Pin Header +0.1 Board Through-hole Diameter:O1.1+0 Unit: mm Tin plated Gold plated Part Number CL No. Part Number CL No. Number of Contacts A B DF1BZ- 4DP-2.5DSA 541-2017-0 DF1B- 4DP-2.5DSA(01) 541-0651-5-01 4 2.5 7.5 DF1BZ- 6DP-2.5DSA 541-2018-3 DF1B- 6DP-2.5DSA(01) 541-0652-8-01 6 5.0 10.0 DF1BZ- 8DP-2.5DSA 541-2019-6 DF1B- 8DP-2.5DSA(01) 541-0653-0-01 8 7.5 12.5 DF1BZ-10DP-2.5DSA 541-2020-5 DF1B-10DP-2.5DSA(01) 541-0616-4-01 10 10.0 15.0 DF1BZ-12DP-2.5DSA 541-2021-8 DF1B-12DP-2.5DSA(01) 541-0617-7-01 12 12.5 17.5 DF1BZ-14DP-2.5DSA 541-2022-0 DF1B-14DP-2.5DSA(01) 541-0618-0-01 14 15.0 20.0 DF1BZ-16DP-2.5DSA 541-2023-3 DF1B-16DP-2.5DSA(01) 541-0619-2-01 16 17.5 22.5 DF1BZ-18DP-2.5DSA 541-2024-6 DF1B-18DP-2.5DSA(01) 541-0620-1-01 18 20.0 25.0 DF1BZ-20DP-2.5DSA 541-2025-9 DF1B-20DP-2.5DSA(01) 541-0621-4-01 20 22.5 27.5 YES DF1BZ-22DP-2.5DSA 541-2026-1 DF1B-22DP-2.5DSA(01) 541-0622-7-01 22 25.0 30.0 DF1BZ-24DP-2.5DSA 541-2027-4 DF1B-24DP-2.5DSA(01) 541-0623-0-01 24 27.5 32.5 DF1BZ-26DP-2.5DSA 541-2028-7 DF1B-26DP-2.5DSA(01) 541-0624-2-01 26 30.0 35.0 DF1BZ-28DP-2.5DSA 541-2029-0 DF1B-28DP-2.5DSA(01) 541-0625-5-01 28 32.5 37.5 DF1BZ-30DP-2.5DSA 541-2030-9 DF1B-30DP-2.5DSA(01) 541-0626-8-01 30 35.0 40.0 DF1BZ-34DP-2.5DSA 541-2031-1 DF1B-34DP-2.5DSA(01) 541-0628-3-01 34 40.0 45.0 DF1BZ-36DP-2.5DSA 541-2032-4 DF1B-36DP-2.5DSA(01) 541-0629-6-01 36 42.5 47.5 RoHS 47.5 52.5 541-2033-7 541-0631-8-01 DF1BZ-40DP-2.5DSA DF1B-40DP-2.5DSA(01) 40 Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure. B191 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. Double Row Right Angle Pin Header +0.1 K Board Through-hole Diameter:O1.1+0 Unit: mm Tin plated Gold plated Part Number CL No. Part Number CL No. Number of Contacts A B DF1BZ- 4DP-2.5DS 541-2051-9 DF1B- 4DP-2.5DS(01) 541-0654-3-01 4 7.5 2.5 DF1BZ- 6DP-2.5DS 541-2052-1 DF1B- 6DP-2.5DS(01) 541-0655-6-01 6 10.0 5.0 DF1BZ- 8DP-2.5DS 541-2053-4 DF1B- 8DP-2.5DS(01) 541-0656-9-01 8 12.5 7.5 DF1BZ-10DP-2.5DS 541-2054-7 DF1B-10DP-2.5DS(01) 541-0632-0-01 10 15.0 10.0 DF1BZ-12DP-2.5DS 541-2055-0 DF1B-12DP-2.5DS(01) 541-0633-3-01 12 17.5 12.5 DF1BZ-14DP-2.5DS 541-2056-2 DF1B-14DP-2.5DS(01) 541-0634-6-01 14 20.0 15.0 DF1BZ-16DP-2.5DS 541-2057-5 DF1B-16DP-2.5DS(01) 541-0635-9-01 16 22.5 17.5 DF1BZ-18DP-2.5DS 541-2058-8 DF1B-18DP-2.5DS(01) 541-0636-1-01 18 25.0 20.0 DF1BZ-20DP-2.5DS 541-2059-0 DF1B-20DP-2.5DS(01) 541-0637-4-01 20 27.5 22.5 YES DF1BZ-22DP-2.5DS 541-2060-0 DF1B-22DP-2.5DS(01) 541-0638-7-01 22 30.0 25.0 DF1BZ-24DP-2.5DS 541-2061-2 DF1B-24DP-2.5DS(01) 541-0639-0-01 24 32.5 27.5 DF1BZ-26DP-2.5DS 541-2062-5 DF1B-26DP-2.5DS(01) 541-0640-9-01 26 35.0 30.0 DF1BZ-28DP-2.5DS 541-2063-8 DF1B-28DP-2.5DS(01) 541-0641-1-01 28 37.5 32.5 DF1BZ-30DP-2.5DS 541-2064-0 DF1B-30DP-2.5DS(01) 541-0642-4-01 30 40.0 35.0 DF1BZ-34DP-2.5DS 541-2065-3 DF1B-34DP-2.5DS(01) 541-0644-0-01 34 42.5 37.5 DF1BZ-36DP-2.5DS 541-2066-6 DF1B-36DP-2.5DS(01) 541-0645-2-01 36 47.5 42.5 RoHS 52.5 47.5 541-2067-9 541-0647-8-01 DF1BZ-40DP-2.5DS DF1B-40DP-2.5DS(01) 40 Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 and 6 contact connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure. B192 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Single Row In-line Plug(Simple Lock Type) KApplicable Socket: DF1B-*S-2.5R Contact Inserted. Unit: mm Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B DF1BA- 2EP-2.5RC 541-0700-9 2 2.5 7.1 DF1BA- 8EP-2.5RC 541-0706-5 8 17.5 22.1 DF1BA- 3EP-2.5RC 541-0701-1 3 5 9.6 DF1BA- 9EP-2.5RC 541-0707-8 9 20 24.6 DF1BA- 4EP-2.5RC 541-0702-4 4 7.5 12.1 DF1BA-10EP-2.5RC 541-0708-0 10 22.5 27.1 DF1BA- 5EP-2.5RC 541-0703-7 5 10 14.6 DF1BA-12EP-2.5RC 541-0710-2 12 27.5 32.1 DF1BA- 6EP-2.5RC 541-0704-0 6 12.5 17.1 DF1BA- 7EP-2.5RC 541-0705-2 7 15 19.6 RoHS Yes RoHS Yes Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 2 contacts connector contains the concave portion to prevent miss-insertion in the center area at one point, which is different from the above figure.In addition, the 3 to 7 contact connectors contain the concave portion at both sides. B Panel Cutouts Panel Unit: mm Note 3 C Applicable Plug Number of Contacts Panel Board Thickness (Note 1) D 0.5 to 1.2 1.3 to 1.6 1.7 to 2.0 DF1BA- 2EP-2.5RC 2 11.2 11.9 12.6 DF1BA- 3EP-2.5RC 3 13.7 14.4 15.1 9.8 DF1BA- 4EP-2.5RC 4 16.2 16.9 17.6 12.3 DF1BA- 5EP-2.5RC 5 18.7 19.4 20.1 14.8 DF1BA- 6EP-2.5RC 6 21.2 21.9 22.6 17.3 DF1BA- 7EP-2.5RC 7 23.7 24.4 25.1 19.8 DF1BA- 8EP-2.5RC 8 26.2 26.9 27.6 22.3 DF1BA- 9EP-2.5RC 9 28.7 29.4 30.1 24.8 DF1BA-10EP-2.5RC 10 31.2 31.9 32.6 27.3 DF1BA-12EP-2.5RC 12 36.2 36.9 37.6 32.3 7.3 Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded. B193 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. Double Row In-line Plug (Simple Lock Type) KApplicable Socket: DF1B-*DS-2.5RC Contact Inserted. Unit: mm Part Number CL No. Number of Contacts DF1BA- 4DEP-2.5RC 541-0719-7 4 2.5 DF1BA- 6DEP-2.5RC 541-0720-6 6 5 DF1BA- 8DEP-2.5RC 541-0721-9 8 7.5 DF1BA-10DEP-2.5RC 541-0722-1 10 10 DF1BA-12DEP-2.5RC 541-0723-4 12 12.5 18.6 DF1BA-14DEP-2.5RC 541-0724-7 14 15 21.1 DF1BA-16DEP-2.5RC 541-0725-0 16 17.5 23.6 DF1BA-18DEP-2.5RC 541-0726-2 18 20 26.1 A Part Number CL No. Number of Contacts A B 8.6 DF1BA-20DEP-2.5RC 541-0727-5 20 22.5 28.6 11.1 DF1BA-22DEP-2.5RC 541-0728-8 22 25 31.1 13.6 DF1BA-24DEP-2.5RC 541-0729-0 24 27.5 33.6 16.1 DF1BA-26DEP-2.5RC 541-0730-0 26 30 36.1 DF1BA-28DEP-2.5RC 541-0731-2 28 32.5 38.6 DF1BA-30DEP-2.5RC 541-0732-5 30 35 41.1 DF1BA-34DEP-2.5RC 541-0734-0 34 40 46.1 B RoHS Yes RoHS Yes Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Note 2.The 4 contacts connector contains the concave portion to prevent miss-insertion in the center at one point, which is different from the above figure. B Panel Cutouts Unit: mm C Applicable Plug Number of Contacts DF1BA- 4DEP-2.5RC 4 12.7 13.4 14.1 8.8 DF1BA- 6DEP-2.5RC 6 15.2 15.9 16.6 11.3 DF1BA- 8DEP-2.5RC 8 17.7 18.4 19.1 13.8 DF1BA-10DEP-2.5RC 10 20.2 20.9 21.6 16.3 DF1BA-12DEP-2.5RC 12 22.7 23.4 24.1 18.8 DF1BA-14DEP-2.5RC 14 25.2 25.9 26.6 21.3 DF1BA-16DEP-2.5RC 16 27.7 28.4 29.1 23.8 DF1BA-18DEP-2.5RC 18 30.2 30.9 31.6 26.3 DF1BA-20DEP-2.5RC 20 32.7 33.4 34.1 28.8 DF1BA-22DEP-2.5RC 22 35.2 35.9 36.6 31.3 DF1BA-24DEP-2.5RC 24 37.7 38.4 39.1 33.8 DF1BA-26DEP-2.5RC 26 40.2 40.9 41.6 36.3 DF1BA-28DEP-2.5RC 28 42.7 43.4 44.1 38.8 DF1BA-30DEP-2.5RC 30 45.2 45.9 46.6 41.3 DF1BA-34DEP-2.5RC 34 50.2 50.9 51.6 46.3 Panel Board Thickness (Note 1) D 0.5 to 1.2 1.3 to 1.6 1.7 to 2.0 Note 3 Panel Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded. B194 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Single Row In-line Socket (Full Lock Type) KApplicable Socket: DF1B-*DEP-2.5RC Contact Inserted. Unit: mm Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B DF1B- 2ES-2.5RC 541-0320-8 2 2.5 6.5 DF1B- 8ES-2.5RC 541-0326-4 8 17.5 21.5 DF1B- 3ES-2.5RC 541-0321-0 3 5 9 DF1B- 9ES-2.5RC 541-0327-7 9 20 24 DF1B- 4ES-2.5RC 541-0322-3 4 7.5 11.5 DF1B-10ES-2.5RC 541-0328-0 10 22.5 26.5 DF1B- 5ES-2.5RC 541-0323-6 5 10 14 DF1B-11ES-2.5RC 541-0329-2 11 25 29 DF1B- 6ES-2.5RC 541-0324-9 6 12.5 16.5 DF1B-12ES-2.5RC 541-0330-1 12 27.5 31.5 DF1B- 7ES-2.5RC 541-0325-1 7 15 19 DF1B-13ES-2.5RC 541-0331-4 13 30 34 RoHS Yes RoHS Yes Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. B Panel Cutouts Note 3 Panel Unit: mm E Applicable Plug Number of Contacts C D Panel Board Thickness (Note 1) 0.5 to 1.2 1.3 to 1.6 1.7 to 2.0 DF1B- 2ES-2.5RC 2 4.7 6.7 10.8 11.3 12 DF1B- 3ES-2.5RC 3 7.2 9.2 13.3 13.8 14.5 DF1B- 4ES-2.5RC 4 9.7 11.7 15.8 16.3 17 DF1B- 5ES-2.5RC 5 12.2 14.2 18.3 18.8 19.5 DF1B- 6ES-2.5RC 6 14.7 16.7 20.8 21.3 22 DF1B- 7ES-2.5RC 7 17.2 19.2 23.3 23.8 24.5 DF1B- 8ES-2.5RC 8 19.7 21.7 25.8 26.3 27 DF1B- 9ES-2.5RC 9 22.2 24.2 28.3 28.8 29.5 DF1B-10ES-2.5RC 10 24.7 26.7 30.8 31.3 32 DF1B-11ES-2.5RC 11 27.2 29.2 33.3 33.8 34.5 DF1B-12ES-2.5RC 12 29.7 31.7 35.8 36.3 37 DF1B-13ES-2.5RC 13 32.2 34.2 38.3 38.8 39.5 Note 1.The installation hole size C will be changed according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded. B195 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. Double Row In-line Socket (Full Lock Type) KApplicable Socket: DF1B-*EP-2.5RC Contact Inserted. Unit: mm Part Number CL No. Number of Contacts Part Number CL No. Number of Contacts A B DF1B-10DES-2.5RC 541-0351-1 15 DF1B-24DES-2.5RC 541-0357-8 24 27.5 32.5 DF1B-12DES-2.5RC DF1B-14DES-2.5RC 12.5 17.5 DF1B-26DES-2.5RC 541-0358-0 26 30 35 15 20 DF1B-28DES-2.5RC 541-0359-3 28 32.5 37.5 16 17.5 22.5 DF1B-30DES-2.5RC 541-0360-2 30 35 40 541-0346-1 18 20 25 DF1B-32DES-2.5RC 541-0361-5 32 37.5 42.5 DF1B-20DES-2.5RC 541-0355-2 20 22.5 27.5 DF1B-34DES-2.5RC 541-0362-8 34 40 45 DF1B-22DES-2.5RC 541-0356-5 22 25 30 A B 10 10 541-0352-4 12 541-0353-7 14 DF1B-16DES-2.5RC 541-0354-0 DF1B-18DES-2.5RC RoHS Yes RoHS Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. B Panel Cutouts Note 3 Panel Unit: mm C Applicable Plug Number of Contacts Panel Board Thickness (Note 1) 0.5 to 1.2 1.3 to 1.6 1.7 to 2.0 E DF1B-10DES-2.5RC 10 19.1 19.8 20.5 15.2 3.7 DF1B-12DES-2.5RC 12 21.6 22.3 23 17.7 3.7 DF1B-14DES-2.5RC 14 24.1 24.8 25.5 20.2 3.7 DF1B-16DES-2.5RC 16 26.6 27.3 28 22.7 3.7 DF1B-18DES-2.5RC 18 29.1 29.8 30.5 25.2 3.7 DF1B-20DES-2.5RC 20 31.6 32.3 33 27.7 5.2 DF1B-22DES-2.5RC 22 34.1 34.8 35.5 30.2 5.2 DF1B-24DES-2.5RC 24 36.6 37.3 38 32.7 5.2 DF1B-26DES-2.5RC 26 39.1 39.8 40.5 35.2 5.2 DF1B-28DES-2.5RC 28 41.6 42.3 43 37.7 5.2 DF1B-30DES-2.5RC 30 44.1 44.8 45.5 40.2 5.2 DF1B-32DES-2.5RC 32 46.6 47.3 48 42.7 5.2 DF1B-34DES-2.5RC 34 49.1 49.8 50.5 45.2 5.2 Note 1.The installation hole size C according to panel board thickness. Note 2.Fabricate installation holes so that no burr can occur. Note 3.At the panel tab portion, use the surface that will not be rounded. B196 D Yes The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) Single Row In-line Plug (Full Lock Type) KApplicable Socket: DF1B-*ES-2.5RC Contact Inserted. Unit: mm Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B DF1B- 2EP-2.5RC 541-0332-7 2 8.9 2.5 DF1B- 8EP-2.5RC 541-0338-3 8 23.9 17.5 DF1B- 3EP-2.5RC 541-0333-0 3 11.4 5 DF1B- 9EP-2.5RC 541-0339-6 9 26.4 20 DF1B- 4EP-2.5RC 541-0334-2 4 13.9 DF1B-10EP-2.5RC 541-0340-5 10 28.9 22.5 DF1B- 5EP-2.5RC 541-0335-5 5 16.4 10 DF1B-11EP-2.5RC 541-0341-8 11 31.4 25 DF1B- 6EP-2.5RC 541-0336-8 6 18.9 12.5 DF1B-12EP-2.5RC 541-0342-0 12 33.9 27.5 DF1B- 7EP-2.5RC 541-0337-0 7 21.4 15 DF1B-13EP-2.5RC 541-0343-3 13 36.4 30 7.5 RoHS Yes RoHS Yes Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. Double Row In-line Plug (Full Lock Type) KApplicable Socket: DF1B-*DES-2.5RC Contact Inserted. Unit: mm Part Number CL No. Number of Contacts A Part Number CL No. Number of Contacts A B DF1B-10DEP-2.5RC 541-0366-9 10 17.2 DF1B-12DEP-2.5RC 541-0367-1 12 19.7 10 DF1B-24DEP-2.5RC 541-0372-1 24 34.7 27.5 12.5 DF1B-26DEP-2.5RC 541-0373-4 26 37.2 30 DF1B-14DEP-2.5RC 541-0368-4 14 22.2 15 DF1B-28DEP-2.5RC 541-0374-7 28 39.7 32.5 DF1B-16DEP-2.5RC 541-0369-7 16 24.7 17.5 DF1B-30DEP-2.5RC 541-0375-0 30 42.2 35 DF1B-18DEP-2.5RC 541-0350-9 18 27.2 20 DF1B-32DEP-2.5RC 541-0376-2 32 44.7 37.5 DF1B-20DEP-2.5RC 541-0370-6 20 29.7 22.5 DF1B-34DEP-2.5RC 541-0377-5 34 47.2 40 DF1B-22DEP-2.5RC 541-0371-9 22 32.2 25 B RoHS Yes RoHS Yes Note 1.The quantity at the specific No. "None" is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. B197 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. ID Contact for Socket Part Number CL No. DF1B-R24F 541-0217-9 DF1B-R24 541-0220-3 DF1B-R26F 541-0218-1 DF1B-R26 541-0221-6 DF1B-R28F 541-0219-4 DF1B-R28 541-0222-9 DF1B-R24FA(06) 541-0261-0-06 DF1B-R24A(06) 541-0264-9-06 DF1B-R26FA(06) 541-0262-3-06 DF1B-R26A(06) 541-0265-1-06 DF1B-R28FA(06) 541-0263-6-06 DF1B-R28A(06) 541-0266-4-06 Applicable Cable Applicable Cable Indication AWG UL Style Wire Construction Jacket Diameter 24 AWG 24 1061 11 cores./0.16mm 0.9 to 1.39mm 26 AWG 26 28 AWG 28 24 AWG 24 26 AWG 26 28 AWG 28 1061 1007 1061 1007 1061 1061 1007 1061 1007 7 cores./0.16mm Packaging Type Quantity Reel 10000 0.9 to 1.39mm 7 cores./0.127mm 0.9 to 1.39mm 11 cores./0.16mm 0.9 to 1.39mm 7 cores./0.16mm 0.9 to 1.39mm 7 cores./0.127mm 0.9 to 1.39mm Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Finish RoHS Tin plated Yes Gold plated K ID Contact Extraction Tool DF-C-PO (A) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, cotact Hirose sales department. Crimping Contact for Socket K Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Wire construction) AWG20 (21cores/0.18mm) AWG22 (17cores/0.16mm) AWG24 (11cores/0.16mm) AWG26 (7cores/0.16mm) AWG28 (7cores0.127mm) AWG30 (7cores/0.1mm) Part Number CL No. Applicable Applicable Cable Cable Indication AWG DF1B-2022SCF 541-0223-1 20 AWG 20 to DF1B-2022SC 541-0224-4 22 AWG 22 DF1B-2428SCF 541-0678-1 24 AWG 24 to DF1B-2428SC 541-0679-4 28 AWG 28 DF1B-30SCF 541-0682-9 DF1B-30SC 541-0683-1 30 AWG 30 DF1B-2022SCFA 541-0662-1 20 AWG 20 to AWG 22 DF1B-2022SCA 541-0663-4 22 DF1B-2428SCFA 541-0680-3 24 AWG 24 to DF1B-2428SCA 541-0681-6 28 AWG 28 30 AWG 30 DF1B-30SCFA 541-0684-4 DF1B-30SCA 541-0685-7 K Crimping Contact Extraction Tool DF-C-PO (B) B198 Jacket Diameter 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm Packaging Type Quantity Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 K Recommended Cable UL1061, UL1007 K Strip Length 2.0 to 2.5mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department. Finish RoHS Tin plated Yes Gold plated The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) ID Contact for Plug Part Number CL No. DF1B-24PRF 541-0666-2 DF1B-24PR 541-0667-5 DF1B-26PRF 541-0668-8 DF1B-26PR 541-0669-0 DF1B-28PRF 541-0670-0 DF1B-28PR 541-0671-2 Applicable Cable Applicable Packaging Cable Indication AWG UL Style Wire structure Jacket Diameter 24 AWG 24 1061 11 pcs./0.16mm 0.9 to 1.39mm 26 AWG 26 28 AWG 28 1061 1007 1061 1007 7 pcs./0.16mm 0.9 to 1.39mm 7 pcs./0.127mm 0.9 to 1.39mm Type Quantity Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Finish RoHS Tin plated Yes K ID Contact Extraction Tool DF-C-PO (C) Note 1.The applicable cable conductor is the tin plated annealing copper wire. Note 2.If other cables are used instead of the applicable cable, contact Hirose sales department. Crimping Contact for Plug K Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (Contact wire construction) AWG20 (21 pieces/0.18mm) AWG22 (17 pieces/0.16mm) AWG24 (11 pieces/0.16mm) AWG26 (7 pieces/0.16mm) AWG28 (7 pieces/0.127mm) AWG30 (7 pieces/0.1mm) Applicable Cable Applicable cable indicator AWG DF1B-2022PCF 541-0259-9 20 AWG 20 to Part Number CL No. DF1B-2022PC 541-0260-8 22 AWG 22 DF1B-2428PCF 541-0664-7 24 AWG 24 to DF1B-2428PC 541-0665-0 28 AWG 28 30 AWG 30 DF1B-2022PCFB 541-0690-7 20 AWG 20 to DF1B-2022PCB 541-0691-0 22 AWG 22 DF1-PD2428SCFB 541-0660-6 24 AWG 24 to DF1-PD2428SCB 541-0661-9 28 AWG 28 30 AWG 30 DF1B-30PCF 541-0686-0 DF1B-30PC 541-0687-2 DF1B-30PCFB 541-0688-5 DF1B-30PCB 541-0689-8 Jacket Diameter 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm Packaging Type Quantity Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 Reel 10000 Bag 100 K Recommended Cable UL1061, UL1007 K Strip Length 3.0 to 3.7mm Note:If other cables are used instead of the applicable cable, consult Hirose sales department. Treatment RoHS Tin plated Yes Gold plated K Crimping Contact Extraction Tool DF-C-PO (C) B199 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the Connection products status on(Product the Hirose website RoHS search at www.hirose-connectors.com, DF1B Series2.5mm Pitch Connector for Discrete Wire Compliant with UL/CSA Standard) or contact your Hirose sales representative. B Applicable Tool [Press Main Unit and Applicator] Connection Type Type Applicator ID Manual ID tool [Manual Crimping Tool] Part Number CL No. AP105-DF1B-R 901-4507-4 DF1B-R**F/FA06 **=24,26,28 Applicable Contacts AP105-DF1B-PR 901-4536-2 DF1B-**PRF**=24,26,28 DF1B-T2428HR 550-0171-0 DF1B-R**/A06**=24,26,28 DF1B-T2428PHR 550-0221-7 DF1B-**PR/PRB **=24,26,28 AP105-DF1B-2022S 901-4510-9 DF1B-2022SCF/SCFA AP105-DF1B-2428S 901-4518-0 DF1B-2428SCF/SCFA AP105-DF1B-30S 901-4517-8 DF1B-30SCF/SCFA AP105-DF1B-2022P 901-4509-0 DF1B-2022PCF/PCFB AP105-DF1B-2428P 901-4521-5 DF1B-2428PCF,DF1-PD2428SCF/SCFB AP105-DF1B-30P 901-4519-3 DF1B-30PCF/PCFB DF1B-TA2022SHC 550-0182-7 DF1B-2022SC/SCA DF1B-TA2428SHC 550-0209-1 DF1B-2428SC/SCA Manual DF1B-TA30SHC 550-0211-3 DF1B-30SC/SCA crimping tool DF1B-TA2022PHC 550-0183-0 DF1B-2022PC/PCB DF1B-TA2428PHC 550-0224-5 DF1B-2428PC,DF1-PD2428SCB DF1B-TA30PHC 550-0210-0 DF1B-30PC/PCB Applicator Crimping Press Main Unit Extraction Tool CM-105 901-0005-4 __________________________________ DF-C-PO(A) 550-0170-8 DF1B-R**F DF-C-PO(B) 550-0179-2 DF1B-****SCF DF-C-PO(C) 550-0198-7 DF1B-****PC,DF1B-**PRF Note: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product B200 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please Pitch check theConnector products statusfor on Discrete the Hirose website search at www.hirose-connectors.com, or contact Hirose sales representative. DF1B Series2.5mm WireRoHS Connection (Product Compliant with your UL/CSA Standard) B Applicable Tool BPrecautions 1. Recommended Soldering Condition Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds 2. Cleaning Condition Refer to Nylon Connector Use Hand book. 3. Connection Condition Refer to Nylon Connector Use Hand book. 4. Cautions The color phase of this product is slightly different from that of the formed product according to the manufacturing lot and future storage conditions, but the difference doesn't affect the performance. 5. Precation Refer to Nylon Connector Use Hand book. B201