RGL34A THRU RGL34J SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 600 Volts D * FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mount applications High temperature metallurgically bonded construction Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed: 450C/5 seconds at terminals. Complete device submersible temperature of 260C for 10 seconds in solder bath T E DO-213AA N E P A T Forward Current - 0.5 Ampere SOLDERABLE ENDS 1st BAND 2nd BAND D1= 0.066 0.060 (1.676) (1.524) D2 0.022 (0.559) 0.016 (0.406) D2 = D1 + 0 - 0.008 (0.20) 0.145 (3.683) 0.131(3.327) MECHANICAL DATA 1st band denotes type and polarity 2cnd band denotes voltage type Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No.3,996,602 and brazed-lead assembly by Patent No.3,930,306 (R) Case: JEDEC DO-213AA molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 ounce, 0.036 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. Fast switching device: 1st band is Red SYMBOLS RGL34A RGL34B RGL34D RGL34G RGL34J UNITS Polarity color bands (2nd Band) Maximum repetitive peak reverse voltage VRRM Gray 50 Red 100 Orange 200 Yellow 400 Green 600 Volts Maximum RMS voltage VRMS 35 70 140 280 420 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 Volts Maximum average forward rectified current at TT=55C I(AV) 0.5 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 10.0 Amps VF 1.3 Volts IR 5.0 50.0 A IR(AV) 30.0 A Maximum reverse recovery time (NOTE 1) trr 150 Typical junction capacitance (NOTE 2) Maximum thermal resistance (NOTE 3) (NOTE 4) CJ 4.0 pF RJA RJT 150.0 70.0 C/W TJ, TSTG -65 to +175 C Maximum instantaneous forward voltage at 0.5A Maximum DC reverse current at rated DC blocking voltage TA=25C TA=125C Maximum full load reverse current, full cycle average TA=55C Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal (4) Thermal resistance from junction to terminal, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal 4/98 250 ns RATINGS AND CHARACTERISTIC CURVES RGL34A THRU RGL34J FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE 12 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.5 0.4 0.3 0.2 0.1 0 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 8.0 6.0 4.0 2.0 0 0 25 50 75 100 125 150 175 10 1 TERMINAL TEMPERATURE, C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 INSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60 HZ TJ=25C 1 PULSE WIDTH=300s 1% DUTY CYCLE 1 0.1 TJ = 25C 0.01 0 0.1 TJ=100C 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 10 JUNCTION CAPACITANCE, pF TJ=25C f=1.0 MHz Vsig=50mVp-p 1 1 10 REVERSE VOLTAGE, VOLTS 100 100