Ordering number:EN651D DBA100 Diffused Junction Silicon Diode 10.0A Single-Phase Bridge Rectifier Features Package Dimensions * Plastic molded structure. * Glass passivation for high reliability. * Peak reverse voltage:VRM=200, 600V. * Average rectified current:IO=10.0A. unit:mm 1090 [DBA100] Specifications Absolute Maximum Ratings at Ta = 25C Parameter Peak Reverse Voltage Average Recitified Current Symbol VRM IO Conditions DBA100C DBA100G Unit 200 600 Ta=40C 3.7 V A Ta=40C, with 200x200x1.5mm3 AI fin 10.0 A Surge Forward Current IFSM 200 A Junction Temperature Tj 150 C Storage Temperature Tstg -30 to +150 C Electrical Characteristics at Ta = 25C, per constituent element of bridge Parameter Forward Voltage Reverse Current Symbol VF IR Conditions Ratings min typ max IF=5.0A VR:At each VRM Unit 1.05 V 10 A Note:Mounting torque:0.49N*m max. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/71096GI (KOTO)/N098TA, TS No.651-1/2 DBA100 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.651-2/2