Devices
AlGaAs Red HER Orange Yellow Green Circuit
HDSP- HDSP- HDSP- HDSP- HDSP- Description Diagram
U101 U201 U401 U301 U501 Common Anode, Right A
Hand Decimal, Gray Surface
U103 U203 U403 U303 U503 Common Cathode, Right B
Hand Decimal, Gray Surface
U111 U211 U411 U311 U511 Common Anode, Right A
Hand Decimal, Black Surface
U113 U213 U413 U313 U513 Common Cathode, Right B
Hand Decimal, Black Surface
8 mm (0.31 inch) Ultra Mini
Seven Segment Displays
Technical Data
• High Light Output
• High Peak Current
• Excellent for Long Digit
String Multiplexing
• Intensity and Color
Selection Option
Description
The 8 mm (0.31 inch) LED seven
segment displays are Agilent’s
most space-efficient character
size. They are designed for
viewing distances up to 3 metres
(10 feet). The numeric devices
feature a right hand decimal
point. All devices are available as
either common anode or common
cathode.
Typical applications include
appliances, temperature con-
trollers, and digital panel meters.
HDSP-U1xx Series
HDSP-U2xx Series
HDSP-U3xx Series
HDSP-U4xx Series
HDSP-U5xx Series
Features
• Compact Package
• 8 mm (0.31 inch) Character
Height
• Choice of Colors
Wide Range of Colors
• Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray/Black Surface Gives
Optimum Contrast
±50° Viewing Angle
• Design Flexibility
Common Anode or Common
Cathode
Right Hand Decimal Point
• Categorized for Luminous
Intensity
Yellow and Green also
Categorized for Color
Use of Like Categories Yields
a Uniform Display
2
Part Numbering System
5082-xxxx-xxxxx
HDSP - x xx x - x x x xx
Mechanical Options[1]
00: No mechanical option
36: Special dimensional tolerances
Color Bin Options[1,2]
0: No color bin limitation
Maximum Intensity Bin[1,2]
0: No maximum intensity bin limitation
Minimum Intensity Bin[1,2]
0: No minimum intensity bin limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to respective data sheet
Package[1]
U: 8 mm (0.31 inch) Ultra Mini Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative
for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective data sheet for specific bin limit information.
3
Package Dimensions
1
2
3
4
5
10
9
8
7
6
B
FUNCTION
PIN A B
1
2
3
4
5
6
7
8
9
10
CATHODE a
CATHODE f
CATHODE g
CATHODE e
CATHODE d
CATHODE DP
ANODE DP
CATHODE c
ANODE
CATHODE b
ANODE a
ANODE f
ANODE g
ANODE e
ANODE d
CATHODE DP
ANODE DP
ANODE c
CATHODE
ANODE b
1
4
5
10
9
8
7
6
A
3
2
Internal Circuit Diagram
HDSP-UXXX CIRCUIT
10
DATE CODE
LUMINOUS
INTENSITY
CATEGORY
COLOR BIN
NOTE NO. 3
1
3
4
56
7
92
0.25
(0.010)
10°
8.0
(0.315)
4.5
(0.177)
0.7
(0.028)
11.0 ± 0.2
(0.433 ± 0.008)
1.0
(0.039)
4.0
(0.157)
5.0
(0.197)
MIN.
2.0
(0.079)
0.5
(0.020)
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. FOR YELLOW AND GREEN SERIES PRODUCT ONLY.
a
b
c
d
e
f
DP
g
HDSP-XXXX
XYY ZW
8.0
(0.315)
2.0
(0.079)
2.5
(0.098)
5.5
(0.217)
5.3
(0.209)
7.1
(0.280)
MAX.
8
4
Absolute Maximum Ratings
AlGaAs Red HER/Orange Yellow Green
HDSP- HDSP- HDSP- HDSP-
U1xx U2xx/-4xx U3xx U5xx
Description Series Series Series Series Units
Average Power per Segment or DP 37 105 80 105 mW
Peak Forward Current per 45[1] 90[3] 60[5] 90[7] mA
Segment or DP
DC Forward Current per Segment 15[2] 30[4] 20[6] 30[8] mA
or DP
Operating Temperature Range –20 to +90 –25 to +90 °C
Storage Temperature Range –30 to +90 °C
Reverse Voltage per Segment or DP 3.0 V
Wavesoldering Temperature for 250 °C
3 Seconds (1.60 mm [0.063 in.]
below body)
Notes:
1. See Figure 1 to establish pulsed conditions.
2. No derating over specified temperature range.
3. See Figure 5 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C (see Figure 8).
5. See Figure 6 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C (see Figure 8).
7. See Figure 7 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C (see Figure 8).
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
HDSP- Luminous Intensity/Segment[1,2] IV315 600 µcd IF = 1 mA
3600 IF = 5 mA
Forward Voltage/Segment or DP VF1.6 IF = 1 mA
1.7 V IF = 5 mA
1.8 2.2 IF = 20 mA
Peak Wavelength λPEAK 645 nm
Dominant Wavelength[3] λd637 nm
Reverse Voltage/Segment or DP[4] VR3.0 15 V IR = 100 µA
Temperature Coefficient of ∆VF/°C-2mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-Pin 255 °C/W/
Junction-to-Pin Seg
U1xx (Digit Average)
5
Electrical/Optical Characteristics at TA = 25°C, continued
High Efficiency Red
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
HDSP- Luminous Intensity/Segment[1,2] IV360 980 µcd IF = 5 mA
5390 IF = 20 mA
Forward Voltage/Segment or DP VF2.0 2.5 V IF = 20 mA
Peak Wavelength λPEAK 635 nm
Dominant Wavelength[3] λd626 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of ∆VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-Pin 200 °C/W/
Junction-to-Pin Seg
U2xx (Digit Average)
Orange
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
HDSP- Luminous Intensity/Segment[1,2] IV360 980 µcd IF = 5 mA
5390 IF = 20 mA
Forward Voltage/Segment or DP VF2.0 2.5 V IF = 20 mA
Peak Wavelength λPEAK 600 nm
Dominant Wavelength[3] λd603 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of ∆VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-Pin 200 °C/W/
Junction-to-Pin Seg
(Digit Average)
U4xx
6
High Performance Green
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
HDSP- Luminous Intensity/Segment[1,2] IV860 3000 µcd IF = 10 mA
6800 IF = 20 mA
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 10 mA
Peak Wavelength λPEAK 566 nm
Dominant Wavelength[3,5] λd571 nm
Reverse Voltage/Segment or DP[4] VR3.0 50.0 V IR = 100 µA
Temperature Coefficient of ∆VF/°C-2mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-Pin 200 °C/W/
Junction-to-Pin Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. The Yellow (HDSP-U3XX) series and Green (HDSP-U5XX) series displays are categorized for dominant wavelength. The category is
designated by a number adjacent to the luminous intensity category letter.
(Digit Average)
U5xx
Yellow
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
HDSP- Luminous Intensity/Segment[1,2] IV225 480 µcd IF = 5 mA
2740 IF = 20 mA
Forward Voltage/Segment or DP VF2.2 2.5 V IF = 20 mA
Peak Wavelength λPEAK 583 nm
Dominant Wavelength[3,5] λd581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] VR3.0 50.0 V IR = 100 µA
Temperature Coefficient of ∆VF/°C-2mV/°C
VF/Segment or DP
Thermal Resistance LED RθJ-Pin 200 °C/W/
Junction-to-Pin Seg
U3xx (Digit Average)
7
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs. Pulse
Duration – AlGaAs Red.
Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. DC Forward
Current.
Figure 4. Relative Efficiency (Luminous Intensity per
Unit Current) vs. Peak Current.
t – PULSE DURATION – µs
P
10
1
100
10 1000010001001
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
I PEAK
F
I MAX
DC
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I
MAXIMUM
DC
DC OPERATION
100 Hz
10 KHZ
3 KHz
1 KHz
300 Hz
I
F
– FORWARD CURRENT PER SEGMENT – mA
0
0
V
F
– FORWARD VOLTAGE – V
160
100
60
2.0 4.0
80
20
1.0 3.0
40
AlGaAs RED
0.5 1.5 2.5 3.5
120
140
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
0
0
I
F
– FORWARD CURRENT PER SEGMENT – mA
2.00
1.50
1.25
0.75
0.25
20 40
1.75
1.00
0.50
10 30
5152535
AlGaAs RED
1.4
0.5
I
PEAK
– PEAK FORWARD CURRENT
PER SEGMENT – mA
0.6
0.8
1.0
1.2
150.05.0 50.0
η
PEAK
– NORMALIZED RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 20 mA)
2.0
1.0 3.0
20.010.0
30.0 100.0
500.0
AlGaAs RED
8
HER, Orange, Yellow, Green
Figure 5. Maximum Tolerable Peak Current vs. Pulse
Duration – HER, Orange.
Figure 6. Maximum Tolerable Peak Current vs. Pulse
Duration – Yellow.
Figure 9. Forward Current vs.
Forward Voltage Characteristics.
Figure 10. Relative Luminous
Intensity vs. DC Forward Current.
Figure 11. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.
40
0
5
10
15
20
25
30
35
20 10090807060504030
T – AMBIENT TEMPERATURE – °C
A
I MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
DC
120110
50
45
HER/ORANGE
YELLOW
GREEN
R = 770°C/W
θJ-A
Figure 8. Maximum Allowable DC Current vs. Ambient
Temperature.
Figure 7. Maximum Tolerable Peak Current vs. Pulse
Duration – Green.
0
100
80
60
40
20
I – FORWARD CURRENT PER SEGMENT – mA
F
2.0 4.03.01.0
V – FORWARD VOLTAGE – V
F
0 5.0
YELLOW
HER/ORANGE
GREEN
η – RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND
YELLOW AND TO 1 AT 10 mA FOR GREEN)
PEAK
15
0
10
8
6
4
2
2053010 25
12
I – FORWARD CURRENT PER SEGMENT – mA
F
0
YELLOW
GREEN
HER/ORANGE
η – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 5 mA FOR HER,
ORANGE AND YELLOW, AND 10 mA FOR GREEN)
PEAK
0
I – PEAK FORWARD CURRENT
PER SEGMENT – mA
PEA
K
0.8
1.0
1.2
1.4
10020 806040
1.8
1.6
GREEN
HER/ORANGE
YELLOW
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I PEAK
F
I MAX
DC
t – PULSE DURATION – µs
P
10
1
100
10 1000010001001
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I
MAXIMUM
DC
DC OPERATION
100 Hz
10 KHZ
3 KHz
1 KHz
300 Hz
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I PEAK
F
I MAX
DC
t – PULSE DURATION – µs
P
10
1
100
10 1000010001001
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I
MAXIMUM
DC
DC OPERATION
100 Hz
10 KHZ
3 KHz
1 KHz
300 Hz
RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
I PEAK
F
I MAX
DC
t – PULSE DURATION – µs
P
10
1
100
10 1000010001001
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I
MAXIMUM DC
DC OPERATION
100 Hz
10 KHZ
3 KHz
1 KHz
300 Hz
9
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-U4xx
IV Bin Category Min. Max.
C 0.443 0.677
D 0.554 0.846
E 0.692 1.057
F 0.856 1.322
G 1.082 1.652
H 1.352 2.066
I 1.692 2.581
J 2.114 3.227
K 2.641 4.034
L 3.300 5.042
M 4.127 6.303
N 5.157 7.878
Orange
HDSP-U2xx
IV Bin Category Min. Max.
B 0.342 0.630
C 0.516 0.946
D 0.774 1.418
E 1.160 2.127
F 1.740 3.190
G 2.610 4.785
H 3.915 7.177
HER
HDSP-U1xx
IV Bin Category Min. Max.
E 0.315 0.520
F 0.428 0.759
G 0.621 1.16
H 0.945 1.71
I 1.40 2.56
J 2.10 3.84
K 3.14 5.75
L 4.70 8.55
10
HDSP-U3xx
IV Bin Category Min. Max.
B 0.229 0.387
C 0.317 0.582
D 0.476 0.872
E 0.714 1.311
F 1.073 1.967
G 1.609 2.950
H 2.413 4.425
Yellow
HDSP-U5xx
IV Bin Category Min. Max.
H 0.86 1.58
I 1.29 2.37
J 1.94 3.55
K 2.90 5.33
L 4.37 8.01
Green
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Color Categories
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local
Agilent representatives for further clarification/information.
Electrical/Optical
For more information on
electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chorinated hydrocarbon family
(methylene chloride, trichloro-
ethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating materials used
to form the package of plastic
LED parts.
For more information on
soldering LEDs, please refer to
Application Note 1027.
11
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5964-6424E
July 12, 2004
5988-2220EN
