11-2020, Rev. 1120
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
SCHRACK
General Purpose Relays
PCB Relays
n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
n DC or AC coil
n 5kV/10mm coil-contact, reinforced insulation
n Ambient temperature 85°C (DC coil)
n WG version: product in accordance to IEC 60335-1
n Reflow version: for THR (Through-Hole Reflow) soldering process
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules
Approvals
VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018;
CQC 18002197247
Technical data of approved types on request
Contact Data 12A 16A
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 12A 16A
Limiting continuous current 12A 16A, UL: 20A
Limiting making current
max. 4s, duty factor 10% 25A 30A
Breaking capacity max. 3000VA 4000VA
Contact material AgNi 90/10, AgNi 90/10 gold plated
Frequency of operation, with/without load
DC coil 360/72000h-1
AC coil 360/36000h-1
Operate/release time max., DC coil 8/6ms
Bounce time max., DC coil, form A/form B 4/6ms
Electrical endurance see electrical endurance graph1)
Contact ratings
Type Contact Load Cycles
IEC 61810
RT314 DC-coil A (NO) 16A, 250VAC, cosφ=1, 85°C 30x103
RT314 DC-coil C (CO) 16A, 250VAC, cosφ=1, 85°C 10x103
RT314 DC-coil A (NO) 10A, 400VAC, cosφ=1, 85°C 150x103
RT114 DC-coil A (NO) 12A, 250VAC, cosφ=1, 85°C 50x103
RT114 AC-coil A (NO) 12A, 250VAC, cosφ=1, 70°C 100x103
UL 508
RT314 A/B (NO/NC)
20A, 250VAC, general purpose, 85°C
6x103
RT334 A (NO)
16A, 250VAC, gen. purpose, 85°C
50x103
RT314 A (NO) 1hp, 240VAC, 40°C 1x103
RT314 A (NO)
FLA/LRA, 4.5/13.1A, 480VAC, 70°C
100x
103
EN60947-4-1
RT314 A (NO) 250V/2A, AC-3 6.050
EN60947-5-1
RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050
RT314 A (NO) 250/3A, AC-15 6.050
EN60730-1
RT314 DC-coil A (NO) 12(2)A, 250VAC, 85°C 100x103
1) For reflow solderable versions: actual contact performance may be influenced by the
reflow soldering process.
Contact Data (continued)
Mechanical endurance
DC coil >30x106 operations
AC coil >10x106 operations
AC coil, reflow version >5x106 operations
Coil Data
Coil voltage range, DC coil/ AC coil 5 to 110VDC / 24 to 230VAC
Operative range, IEC 61810 2
Coil insulation system according UL class F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%2) mW
005 5 3.5 0.5 62 403
006 6 4.2 0.6 90 400
009 9 6.3 0.9 200 400
012 12 8.4 1.2 360 400
018 18 12.6 1.8 770 420
020 20 14.0 2.0 952 420
024 24 16.8 2.4 1440 400
048 48 33.6 4.8 5520 417
060 60 42.0 6.0 85702) 420
110 110 77.0 11.0 288002) 420
2) Coil resistance ±12%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Coil versions, AC coil 50/60 Hz
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VAC VAC VAC Ω±15%3) VA
524 24 18.0 3.6 3503) 0.76
548 48 36.0 7.2 1420 0.74
615 115 86.3 17.3 8100 0.76
620 120 90.0 18.0 8800 0.75
700 200 150.0 30.0 24350 0.76
730 230 172.5 34.5 32500 0.74
3) Coil resistance ±10%.
All figures are given for coil without pre-energization, at ambient temperature +23°C, 50 Hz.
Power PCB Relay RT1
F0144-C
Z
b
11-2020, Rev. 1120
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
SCHRACK
General Purpose Relays
PCB Relays
Power PCB Relay RT1 (Continued)
form A/form B contact, 30 to 500Hz 20g/5g
Shock resistance (destructive) 100g
Other Data (continued)
Terminal type
standard version PCB-THT, plug-in
reflow version PCB-THR
Mounting distance AC coil: ≥2.5mm
Weight 14g
Resistance to soldering heat THT, IEC 60068-2-20
RTII 270°C/10s
RTIII 260°C/5s
Resistance to soldering heat THR
reflow soldering (for reflow version) forced gas convection 4) or
vapour phase 5)
temperature profile according EN61730
Packaging/unit tube/20 pcs., box/500 pcs.
4) infrared heating not allowed
5) recommended fluid LS/230
Accessories
For details see datasheet
Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 1000Vrms
between contact and coil 5000Vrms
Clearance/creepage
between contact and coil ≥10/10mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250V
reflow version PTI 175V
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire
WG version or Reflow version according EN60335, par30
Ambient temperature
DC coil -40 to 85°C
AC coil -40 to 70°C
Category of environmental protection, IEC 61810
standard version RTII - flux proof, RTIII - wash tight
reflow version RTII - flux proof
Vibration resistance (functional)
PCB layout / terminal assignment
Bottom view on solder pins
12 A, pinning 3.5 mm
1 form C (CO) contact
1 form A (NO) contact
12 A, pinning 5 mm
1 form C (CO) contact
1 form A (NO) contact
16 A, pinning 5 mm
1 form C (CO) contact
1 form A (NO) contact
S0418-CB S0418-CN S0418-CA
S0163-BES0163-BCS0163-BG
S0163-BH S0163-BD S0163-BF
*) With the recommended PCB hole sizes a grid
pattern from 2.5 mm to 2.54 mm can be used.
11-2020, Rev. 1120
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
SCHRACK
General Purpose Relays
PCB Relays
Power PCB Relay RT1 (Continued)
Product code structure Typical product code RT 3 1 4 024
Type
RT Power PCB Relay RT1
Version
1 12A, pinning 3.5mm, flux proof
2 12A, pinning 5mm, flux proof
3 16A, pinning 5mm, flux proof
B 12A, pinning 3.5mm, wash tight
C 12A, pinning 5mm, wash tight
D 16A, pinning 5mm, wash tight
Contact arrangement
1 1 form C (CO) contact
3 1 form A (NO) contact
Contact material
4 AgNi 90/10
5 AgNi 90/10 gold plated (for type RT31.)
Coil
Coil code: please refer to coil versions table
Version
Blank Standard version
WG Product in accordance with IEC 60335-1 (domestic appliances)
R Reflow solderable
Dimensions
S0272-BB
Process conditions for Reflow soldering
according to EN61760-1
THT version THR version (reflow solderable)
S0272-BRB
11-2020, Rev. 1120
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
4
SCHRACK
General Purpose Relays
PCB Relays
Power PCB Relay RT1 (Continued)
Product code Version Contacts Contact material Coil Version Part number
RT114009 12A, 1 form C (CO) AgNi 90/10 9VDC Standard 1393239-9
RT114012 pinning 3.5mm, 1 form C (CO) 12VDC 1419108-1
RT114012WG flux proof 1 form C (CO) 12VDC IEC60335-1 compliant 7-1415538-6
RT114024 1 form C (CO) 24VDC Standard 1-1393239-3
RT114024WG 1 form C (CO) 24VDC IEC60335-1 compliant 1415539-4
RT114730 1 form C (CO) 230VAC Standard 1-1393239-9
RT115024 1 form C (CO) AgNi 90/10 gold pl. 24VDC 2-1393239-1
RT134012 1 form A (NO) AgNi 90/10 12VDC 2-1393239-6
RT134024 1 form A (NO) 24VDC 3-1393239-0
RT214012 12A, 1 form C (CO) 12VDC 5-1393239-4
RT214024 pinning 5mm, 1 form C (CO) 24VDC 5-1393239-5
RT214524 flux proof 1 form C (CO) 24VAC 5-1393239-9
RT214730 1 form C (CO) 230VAC 1419108-6
RT314005 16A, 1 form C (CO) 5VDC 9-1393239-1
RT314006 pinning 5mm, 1 form C (CO) 6VDC 9-1393239-3
RT314009 flux proof 1 form C (CO) 9VDC 9-1393239-4
RT314012 1 form C (CO) 12VDC 9-1393239-5
RT314012R 1 form C (CO) 12VDC Reflow solderable 4-1415543-6
RT314012WG 1 form C (CO) 12VDC IEC60335-1 compliant 8-1415535-6
RT314018 1 form C (CO) 18VDC Standard 9-1393239-7
RT314024 1 form C (CO) 24VDC 9-1393239-8
RT314024WG 1 form C (CO) 24VDC IEC60335-1 compliant 1415538-7
RT314048 1 form C (CO) 48VDC Standard 1393240-1
RT314060 1 form C (CO) 60VDC 1-1649328-7
RT314110 1 form C (CO) 110VDC 1393240-3
RT314524 1 form C (CO) 24VAC 1393240-4
RT314548 1 form C (CO) 48VAC 1393240-5
RT314615 1 form C (CO) 115VAC 1393240-6
RT314730 1 form C (CO) 230VAC 1393240-7
RT314730WG 1 form C (CO) 230VAC IEC60335-1 compliant 4-1415538-0
RT315024 1 form C (CO) AgNi 90/10 gold pl. 24VDC Standard 1-1393240-4
RT334009WG 1 form A (NO) AgNi 90/10 9VDC IEC60335-1 compliant 3-1415538-1
RT334012 1 form A (NO) 12VDC Standard 4-1393240-5
RT334012WG 1 form A (NO) 12VDC IEC60335-1 compliant 1-1415527-1
RT334024 1 form A (NO) 24VDC Standard 4-1393240-8
RT334048 1 form A (NO) 48VDC 5-1393240-0
RTB14005 12A, 1 form C (CO) 5VDC 1-1393238-2
RTB14012 pinning 3.5mm, 1 form C (CO) 12VDC 1-1393238-5
RTB14024 wash tight 1 form C (CO) 24VDC 1-1393238-9
RTB14524 1 form C (CO) 24VAC 2-1393238-4
RTB34012 1 form A (NO) 12VDC 3-1393238-0
RTC14024 12A, 5mm, wash tight 1 form C (CO) 24VDC 5-1393238-0
RTD14005 16A, 1 form C (CO) 5VDC 5-1393238-9
RTD14012 pinning 5mm, 1 form C (CO) 12VDC 6-1393238-2
RTD14024 wash tight 1 form C (CO) 24VDC 6-1393238-8
RTD14048 1 form C (CO) 48VDC 6-1393238-9
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request
