MBR6045PT-D - ON Semiconductor

 Semiconductor Components Industries, LLC, 2000

December, 2000 – Rev. 5 1Publication Order Number:

MBR6045PT/D

MBR6045PT

SWITCHMODE

Power Rectifier

The SWITCHMODE power rectifier employs the use of the

Schottky Barrier principle with a Platinum barrier metal. This

state-of-the-art device has the following features:

•Dual Diode Construction – Terminals 1 and 3 May Be Connected for

Parallel Operation at Full Rating

•45 Volt Blocking Voltage

•Low Forward Voltage Drop

•Guardring for Stress Protection and High dv/dt Capability

(> 10 V/ns)

•150°C Operating Junction Temperature

Mechanical Characteristics

•Case: Epoxy, Molded

•Weight: 4.3 grams (approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

•Lead Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

•Shipped 30 Units Per Plastic Tube

•Marking: MBR6045PT

MAXIMUM RATINGS

Rating Symbol Max Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

45 V

Average Rectified Forward Current

(Rated VR, TC = 125°C) Per Diode

Per Device

IF(AV) 30

Peak Repetitive Forward Current,

(Rated VR, Square Wave, 20 kHz

@ TC = 90°C) Per Diode

IFRM 60 A

Non–Repetitive Peak Surge Current

(Surge Applied at Rated Load

Conditions Halfwave, Single

Phase, 60 Hz)

IFSM 500 A

Peak Repetitive Reverse Current

(2.0 s, 1.0 kHz) IRRM 2.0 A

Storage Temperature Range Tstg –65 to +175 °C

Operating Junction Temperature TJ–65 to +150 °C

Peak Surge Junction Temperature

(Forward Current Applied) TJ(pk) 175 °C

Voltage Rate of Change dv/dt 10,000 V/sDevice Package Shipping

ORDERING INFORMATION

MBR6045PT SOT–93

http://onsemi.com

30 Units/Rail

SCHOTTKY BARRIER

RECTIFIER

60 AMPERES

45 VOLTS

2,4

MARKING DIAGRAM

MBR6045PT

MBR6045PT = Device Code

SOT–93

CASE 340D

STYLE 2

MBR6045PT

http://onsemi.com

THERMAL CHARACTERISTICS

Rating Symbol Max Unit

Thermal Resistance – Junction to Case RθJC 1.0 °C/W

ELECTRICAL CHARACTERISTICS

Instantaneous Forward Voltage (Note 1.)

@ IF = 30 Amps, TC = 25°C

@ IF = 30 Amps, TC = 125°C

@ IF = 60 Amps, TC = 25°C

VF0.62

0.55

0.75

Volts

Instantaneous Reverse Current (Note 1.)

@ Rated DC Voltage, TC = 25°C

@ Rated DC Voltage, TC = 100°C

IR1.0

1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤2.0%

TYPICAL ELECTRICAL CHARACTERISTICS

Figure 1. Typical Reverse Current Figure 2. Typical Forward Voltage

VR, REVERSE VOLTAGE (VOLTS)

IR, REVERSE CURRENT (mA)

vF, INSTANTANEOUS FORWARD VOLTAGE (mV)

iF, INSTANTANEOUS FORWARD CURRENT (AMPS)

1000

100

0.1

0.01 50403020100

TC = 150°C

TC = 100°C

TC = 25°C

100

1100 200 300 400 500 600 700 800

150°C 100°C TC = 25°C

MBR6045PT

http://onsemi.com

PACKAGE DIMENSIONS

SOT–93

(TO–218)

PLASTIC

CASE 340D–02

ISSUE B

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETER.

BQEC

DIM MIN MAX MIN MAX

INCHESMILLIMETERS

A--- 20.35 --- 0.801

B14.70 15.20 0.579 0.598

C4.70 4.90 0.185 0.193

D1.10 1.30 0.043 0.051

E1.17 1.37 0.046 0.054

G5.40 5.55 0.213 0.219

H2.00 3.00 0.079 0.118

J0.50 0.78 0.020 0.031

K31.00 REF 1.220 REF

L--- 16.20 --- 0.638

Q4.00 4.10 0.158 0.161

S17.80 18.20 0.701 0.717

U4.00 REF 0.157 REF

V1.75 REF 0.069

123

STYLE 2:

PIN 1. ANODE

2. CATHODE

3. ANODE

4. CATHODE

MBR6045PT

http://onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes

without further notice to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular

purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,

including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be

validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.

SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or

death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold

SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable

attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim

alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

CENTRAL/SOUTH AMERICA:

Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)

Email: ONlit–spanish@hibbertco.com

Toll–Free from Mexico: Dial 01–800–288–2872 for Access –

then Dial 866–297–9322

ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support

Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)

Toll Free from Hong Kong & Singapore:

001–800–4422–3781

Email: ONlit–asia@hibbertco.com

JAPAN: ON Semiconductor, Japan Customer Focus Center

4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031

Phone: 81–3–5740–2700

Email: r14525@onsemi.com

ON Semiconductor Website: http://onsemi.com

For additional information, please contact your local

Sales Representative.

MBR6045PT/D

SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.

NORTH AMERICA Literature Fulfillment:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada

Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada

Email: ONlit@hibbertco.com

Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada

N. American Technical Support: 800–282–9855 Toll Free USA/Canada

EUROPE: LDC for ON Semiconductor – European Support

German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)

Email: ONlit–german@hibbertco.com

French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)

Email: ONlit–french@hibbertco.com

English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)

Email: ONlit@hibbertco.com

EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781

*Available from Germany, France, Italy, UK, Ireland