© Semiconductor Components Industries, LLC, 2006
July, 2006 − Rev. 2
1Publication Order Number:
CS59201/D
CS59201
Winchester Servo
Preamplifier with
Low Current Drain
The CS59201 is a low noise servo preamplifier for use with ferrite
heads. It is a differential input, differential output design with fixed
gain of approximately 100. Features include low noise, wide
bandwidth and low current drain.
Features
•50 MHz Bandwidth
•Operates From Any of Three Standard Supply Voltages:
−8.3 V (IBM Compatible)
−10 V
−12 V
•Available in SO−8 Package
OUT+
OUT−
IN+
IN−
VCC
VEE
Figure 1. Block Diagram
http://onsemi.com
PIN CONNECTION AND
MARKING DIAGRAM
SO−8
D SUFFIX
CASE 751
1
8
OUT+VEE
1
59201
ALYW
8
OUT−NC
VCC
IN−
NCIN+
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
Device Package Shipping
ORDERING INFORMATION
CS59201GD8 SO−8 95 Units/Rail
CS59201GDR8 SO−82500 Tape & Reel
CS59201
http://onsemi.com
2
MAXIMUM RATINGS*
Rating Value Unit
Power Supply Voltage (VCC − VEE) 14 V
Differential Input Voltage 5.0 V
Storage Temperature Range −65 to +150 °C
Operating Temperature Range 0 to 70 °C
Thermal Resistance, Junction−to−Case, RΘJC 45 °C/W
Thermal Resistance, Junction−to−Ambient, RΘJA 165 °C/W
ESD Susceptibility (Human Body Model) 1.4 kV
*The maximum package power dissipation must be observed.
ELECTRICAL CHARACTERISTICS (TA = 25°C, (VCC − VEE) = 7.0 V to 13.2 V; unless otherwise specified.)
Characteristic Test Conditions Min Typ Max Unit
General
Gain (Differential) −80 100 120 V/V
Bandwidth (3.0 dB) VIN = 2.0 mV 30 50 −MHz
Input Resistance −1040 1300 1560 Ω
Input Capacitance − − 20 30 pF
Input Dynamic Range −3.0 − − mV
Power Supply Current (VCC − VEE) = 12 V −20 25 mA
Output Offset (Differential) RS = 0, RL = 130 Ω− − 200 mV
Equivalent Input Noise BW = 4.0 MHz, Note 1 −0.7 1.0 nV/Hz
PSRR, Input Referred RS = 0, f ≤ 5.0 MHz, Note 1 55 60 −dB
Gain Sensitivity (Supply) (VCC − VEE) = ±10% − − ±0.5 %/V
Gain Sensitivity (Temp.) TA = 25°C to 70°C, RL = 130 Ω− −0.1 −%/°C
CMRR, Input Referred f ≤ 5.0 MHz 60 70 −dB
Recommended
Supply Voltage (VCC − VEE)−7.45
9.0
10.8
8.3
10
12
9.15
11
13.2
V
V
V
Input Signal, VIN − − 2.0 −mVPP
Ambient Temperature, TA−0−70 °C
1. 1.0 nV/root Hz and a bandwidth of 4.0 MHz equals 2.0 μVRMS.
CS59201
http://onsemi.com
3
PACKAGE PIN DESCRIPTION
Pin Number
Pin Symbol Function
SO−8
1 IN+ Positive input to preamplifier.
2 IN−Negative input to preamplifier.
3, 8 NC No connection.
4 VEE Negative supply voltage.
5 OUT+ One of the amplifier outputs.
6 OUT−One of the amplifier outputs.
7 VCC Positive supply voltage.
Figure 2. Applications Diagram
HEAD
RLRL
CC
CC
REQ
REQ
VEE
VCC
Recommended Load Conditions
1. Input must be AC coupled.
2. CC’s are AC coupling capacitors.
3. RL’s are DC bias and termination resistors,
(recommended 130 Ω).
4. REQ represents equivalent load resistance.
5. For gain calculations RP = (RL × REQ)/(RL + REQ).
6. Differential gain = 0.72 RP (±18%)(RP in Ω).
7. Ceramic capacitors (0.1 μF) are recommended for
good power supply noise filtering.
CS59201
http://onsemi.com
4
PACKAGE DIMENSIONS
SO−8
D SUFFIX
CASE 751−07
ISSUE W
SEATING
PLANE
1
4
58
N
J
X 45 _
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER
SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN
EXCESS OF THE D DIMENSION AT MAXIMUM
MATERIAL CONDITION.
A
BS
D
H
C
0.10 (0.004)
DIM
A
MIN MAX MIN MAX
INCHES
4.80 5.00 0.189 0.197
MILLIMETERS
B3.80 4.00 0.150 0.157
C1.35 1.75 0.053 0.069
D0.33 0.51 0.013 0.020
G1.27 BSC 0.050 BSC
H0.10 0.25 0.004 0.010
J0.19 0.25 0.007 0.010
K0.40 1.27 0.016 0.050
M0 8 0 8
N0.25 0.50 0.010 0.020
S5.80 6.20 0.228 0.244
−X−
−Y−
G
M
Y
M
0.25 (0.010)
−Z−
Y
M
0.25 (0.010) ZSXS
M
____
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
CS59201/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
