GENERAL PURPOSE — SINGLE & DOUBLE POLE
ESeries
Stainless steel springs
Thermoplastic actuating button
Phenolic case
Silver alloy, silver-cadmium oxide or
gold crosspoint contacts
Common
terminals
NC terminal
Brass moving blades
NC terminal
NO terminal
NO terminal
Features
5 current ratings
Choice of actuator styles
3 terminal types (optional screw
terminals available — consult factory)
3 contact arrangements
Long-life coil spring mechanism
High-temperature 150°C and 200°C
available on select models (consult factory)
Specifications
Electrical
Temperature Rating: 105°C Std. (150°C and 200°C optional — E13, E14, E19, E20, G13)
85°C Std. (E28 and E29), 85°C Std. (150°C optional) E25
Flammability Rating: UL94HB
Materials
Case: General Purpose Phenolic
Actuating Button: Thermoplastic Nylon
Common Terminals: Brass (E13, E19, E19A, G13, G20)
Silver-Plated Brass (E14, E20, E28, E29, E30)
NO and NC Terminals: Brass (E13, E19, E19A, G13, G20)
Copper (E14, E20, E28, E29, E30)
Moving Blade: Brass (E13, E19, E19A, G13, G20)
Silver-Plated Beryllium Copper (E14, E20, E28, E29, E30)
Spring: Stainless Steel
Auxiliary Actuators: Cold-Rolled Steel (Nickel-Plated)
Roller: Sintered Stainless Steel
Contacts: Gold Crosspoint (G13, G20, E19A)
Silver-Cadmium Oxide (E13, E14, E19, E20, E28)
Silver Alloy (E19A, E29, E30)
(E25 only)
Electrical Ratings
Electrical Life at Rated Load
Switch According to VDE According to UL
Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations)
E13/E19 N/A 15A, 125/250VAC; 3/4HP, 125VAC N/A 6,000*
1-1/2HP, 250VAC
E19A N/A 15A, 125/250VAC; 0.1A, 125VAC N/A 6,000
(mixed ratings)
E14/E25 N/A 25A, 125/250VAC; 1HP, 125VAC N/A 6,000
2HP, 250VAC
E20 N/A 20A, 125/250VAC; 1HP, 125VAC N/A 6,000
2HP, 250VAC
E28/E29 N/A 30.1A, 125/250/277VAC N/A 6,000
(UL Approved Only — Resistive Load Only)
E30 N/A 30.1A, 125/250VAC; 1HP, 125VAC N/A 6,000
2HP, 250VAC
G13/G20 N/A 0.1A, 125VAC N/A 6,000*
*Indicates 100K life available.
49
0.500 (12.7)
0.41
(10.41)
0.41
(10.41)
0.33
(8.38)
0.300
(7.62)
0.130
(3.30)
30°
0.250 (6.35) x 0.032 (0.813)
Q.C. or Faston Terminal
0.095 (2.41) Dia. Hole
(3 places)
1.823
(46.30
0.015
0.38)
+
-
+
-
1.000
(25.4
0.007
0.18)
+
-
+
-
0.640
(16.26
0.015
0.38)
+
-
+
-
Reference
Line
0.195
(4.95)
0.310
(7.92
0.005
0.13)
+
-
+
-
0.640
(16.26
0.015
0.38)
+
-
+
-
0.364
(9.25
0.015
0.38)
+
-
+
-
COM N.O.
N.C. 0.380
(9.65
0.015
0.38)
+
-
+
-
0.145 (3.68) Diameter +0.005
-0.010
0.135 x 0.175
0.150
Cavity for External
Auxiliary Actuator
+0.005
–0.010
Dimensions — Single Pole inches (mm)
Actuation
Length
0.375
(9.53)
diameter
Actuation
Length
Switch
Mounting Hole
High Ratio Standard Ratio
0.375 (9.53)
0.375 (9.53)
0.250 (6.35)
0.250 (6.35)
Switch
Mounting Hole
High Ratio Standard Ratio
Actuators — Single Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
0.406 (10.31) 0.312 (7.93)
Flat Both Sides
3/8 x 32 Thread
Thermoplastic
Button
-
OOJ Suffix
Extra Over-travel with Internal
Spring-loaded Metal Button
-
OOM Suffix
“J” & “M” Type
Optional Hardware — Single Pole
Brass Hex Nut 0012-0023
Brass Knurled Nut 0012-0025
Brass Hex Nut 0012-0028
(Nickel-Plated)
Brass Knurled Nut 0012-0021
(Nickel-Plated)
Star Washer 0012-0073
Specifications subject to change without notice.
Ordering Information
Select the current rating you need.
Combine the corresponding Series/Prefix
number with the appropriate suffix number
for the switch you need.
Circuitry — Single Pole
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E13-00E is double throw,
E13-01E is normally open, and E13-02E
is normally closed.
Mounting — Single Pole
Recommended mounting screw: #6-32
round head. Recommended torque on
screw: 6 inch lbs. max.
Terminals — Single Pole
Standard 0.250″x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down. Forms include straight
30°, 45°, 85° up or down. Other forms can
be provided. Screw terminal UL approved
on E14 and E30 only.
Actuator Specifications — Single Pole
Maximum Maximum Operating Minimum Max. Movement Actuation
Operating Pre-Travel Point* Over-Travel Differential Length**
Series/ Actuator Switch Force inches inches inches inches inches
Prefix Type Type (g) (mm) (mm) (mm) (mm) (mm)
E13/G13 –00E 425 0.050 0.285±0.020 0.100 0.015 —
(1.27) (7.24±0.51) (2.54) (0.38)
E14/E29/E30 –00A 850 0.100 0.248±0.026 0.050 0.015 —
(2.54) (6.30±0.66) (1.27) (0.38)
E13/G13 –00J 425 0.050 0.670±0.030 0.108 0.015 —
(1.27) (17.02±0.76) (2.74) (0.38)
E14/E29/E30 850 0.100 0.633±0.030 0.050 0.015 —
(2.54) (16.08±0.76) (1.27) (0.38)
E13/G13 –00M 425 0.050 0.812±0.030 0.218 0.015 —
(1.27) (20.63±0.76) (5.54) (0.38)
E14/E29/E30 850 0.100 0.775±0.030 0.168 0.015 —
(2.54) (19.69±0.76) (4.27) (0.38)
E13/G13 –00H 100 0.250 0.312±0.062 0.187 0.093 1.500
(6.35) (7.93±1.57) (4.75) (2.36) (38.10)
E14/E29/E30†285 0.312 0.468±0.062 0.150 0.050 0.821
(7.93) (11.89±1.57) (3.81) (1.27) (20.85)
E13/G13 –50H 65 0.343 0.281±0.062 0.187 0.140 1.750
(8.71) (7.14±1.57) (4.75) (3.56) (44.45)
E14/E29/E30†170 0.525 0.437±0.062 0.218 0.080 1.071
(13.34) (11.10±1.57) (5.54) (2.03) (27.20)
E13/G13 –00K 100 0.250 0.718±0.062 0.187 0.093 1.391
(6.35) (18.24±1.57) (4.75) (2.36) (35.33)
E14/E29/E30†285 0.348 0.860±0.062 0.130 0.045 0.652
(8.84) (21.84±1.57) (3.30) (1.14) (16.56)
E13/G13 –50K 65 0.343 0.687±0.062 0.187 0.140 1.645
(8.71) (17.45±1.57) (4.75) (3.56) (41.78)
E14/E29/E30†170 0.483 0.828±0.062 0.218 0.073 0.902
(12.27) (21.03±1.57) (5.54) (1.85) (22.91)
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm).
†E14, E29 and E30 actuators are shorter and formed up 11° at the button.
50
0.500
(12.7)
0.330
(8.38)
30°
(2 places)
Reference Line
Cavity for Aux.
External Actuator
0.095 (2.41)
Dia Hole
(6 Places)
0.250 (6.35) x 0.032 (0.81) Thk.
Quick Connect Terminal (6 places)
0.145 (3.68)
0.130
(3.30)
0.641
(16.28
0.015
0.38)
+
-
+
-
0.195
(4.95
0.015
0.38)
+
-
+
-
0.380
(9.65
0.015
0.38)
+
-
+
-
0.786
(19.96
0.015
0.38)
+
-
+
-
0.601
(15.27
0.015
0.38)
+
-
+
-
0.36
(9.14
0.015
0.38)
+
-
+
-
0.406
(10.31
0.015
0.38)
+
-
+
-
1.813
(46.05
0.015
0.38)
+
-
+
-
0.406
(10.31
0.015
0.38)
+
-
+
-
1.000
(25.4
0.007
0.18)
+
-
+
-
0.706
(17.93
0.015
0.38)
+
-
+
-
1.125
(28.58
0.015
0.38)
+
-
+
-
0.300
(7.62
0.015
0.38)
+
-
+
-
N.C.
N.O.
N.C.
N.O.
COM
COM
+0.005
–0.010
0.135 x 0.175
0.150
+0.005
–0.010
Note: With respect to operating
sequence, pole 1 or 2 may operate
first (virtually same time). If pole
1 or 2 must always operate in a
particular sequence (1 before 2
or 2 before 1), consult factory.
Dimensions — Double Pole inches (mm)
Actuation
Length
0.375
(9.53)
Diameter
Actuation
Length
Switch
Mounting Hole
High Ratio Standard Ratio
0.375 (9.53)
0.375 (9.53)
0.250 (6.35)
0.250 (6.35)
Switch
Mounting Hole
High Ratio Standard Ratio
Actuators — Double Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
0.406 (10.31) 0.312 (7.93)
Flat Both Sides
3/8 x 32 Thread
Thermoplastic
Button
-
OOJ Suffix
Extra Over-travel with Internal
Spring-loaded Metal Button
-
OOM Suffix
“J” & “M” Type
Optional Hardware — Double Pole
Brass Hex Nut 0012-0023
Brass Knurled Nut 0012-0025
Brass Hex Nut 0012-0028
(Nickel-Plated)
Brass Knurled Nut 0012-0021
(Nickel-Plated)
Star Washer 0012-0073
Specifications subject to change without notice.
Ordering Information
Select the current rating you need. Combine
the corresponding Series/Prefix number
with the appropriate suffix number for the
switch you need. Note: Consult factory for
part number when ordering E19A switches.
Mounting — Double Pole
Recommended mounting screw: #6-32
round head. Recommended torque on
screw: 6 inch lbs. max.
Circuitry — Double Pole
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E19-00A is double throw,
E19-01A is normally open, and E19-02A
is normally closed.
Terminals — Double Pole
Standard 0.250″x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down on common as well as
open or closed terminal. Forms include
straight 30°, 45°, 85° up or down. Other
forms can be provided.
Actuator Specifications — Double Pole
Maximum Maximum Operating Minimum Max. Movement Actuation
Operating Pretravel Point* Overtravel Differential Length
Series/ Actuator Switch Force inches inches inches inches inches
Prefix Type Type (g) (mm) (mm) (mm) (mm) (mm)
E19/G20 –00A 850 0.050 0.285±0.030 0.080 0.015 —
(1.27) (7.24±0.76) (2.03) (0.38)
E20/E28 1280 0.100 0.248±0.030 0.050 0.015 —
(2.54) (6.30±0.76) (1.27) (0.38)
E19/G20 –-00J 850 0.050 0.670±0.030 0.080 0.015 —
(1.27) (17.02±0.76) (2.03) (0.38)
E20/E28†1280 0.100 0.630±0.030 0.050 0.015 —
(2.54) (16.00±0.76) (1.27) (0.38)
E19/G20 –00M 850 0.050 0.812±0.030 0.218 0.015 —
(1.27) (20.62±0.76) (5.54) (.038)
E20/E28†1280 0.100 0.774±0.030 0.188 0.015 —
(2.54) (19.66±0.76) (4.78) (0.38)
E19/G20 –00H 205 0.275 0.312±0.062 0.187 0.093 1.500
(6.99) (7.92±1.57) (4.75) (2.36) (38.10)
E20/E28†425 0.330 0.468±0.062 0.156 0.050 0.821
(8.38) (11.89±1.57) (3.96) (1.27) (20.85)
E19/G20 –50H 130 0.400 0.281±0.062 0.187 0.140 1.750
(10.16) (7.14±1.57) (4.75) (3.56) (44.45)
E20/E28†285 0.600 0.437±0.062 0.156 0.080 1.071
(15.24) (11.10±1.57) (3.96) (2.03) (27.20)
E19/G20 –00K 212 0.250 0.718±0.062 0.187 0.093 1.391
(6.35) (18.24±1.57) (4.75) (2.36) (35.33)
E20/E28†425 0.348 0.860±0.062 0.156 0.045 0.652
(8.84) (21.84±1.57) (3.96) (1.14) (16.56)
E19/G20 –50K 150 0.312 0.687±0.062 0.187 0.140 1.645
(7.92) (17.45±1.57) (4.75) (3.56) (41.78)
E20/E28†312 0.525 0.828±0.062 0.146 0.075 0.902
(13.34) (21.03±1.57) (3.71) (1.91) (22.91)
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm).
†E20 and E28 actuators are shorter and formed up 15° at the button.
Contact factory for E25 specifications.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CHERRY:
E13-00H E13-00E E13-00K E13-00M E14-00M 0012-0023 E14-50H E14-01M E13-01E G13-00J E13-01H
G13-00H E14-00H E14-00A E13-50K E14-00K E13-50H E13-00K ( CHERRY SWITCH ) E14-50K E13-00J G13-
00M G13-50H
