https://www.phoenixcontact.com/gb/products/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/actuator flush-type socket, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M16 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm Key commercial data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 25.33 g Custom tariff number 85444290 Country of origin Germany Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) -40 C ... 85 C (without mechanical actuation) Degree of protection IP67 IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40C 4A Rated voltage 60 V Number of positions 5 Contact resistance 3 m Insulation resistance 100 M 04/03/14 Page 1 / 5 https://www.phoenixcontact.com/gb/products/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Technical data General Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Surge voltage category II Pollution degree 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Einbauseitig) Mounting type Rear mounting M16 x 1.5 With flat nut Material Inflammability class according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.34 mm AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm 0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance 20 M*km Conductor resistance 57.6 m/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 C ... 85 C (cable, fixed installation) -25 C ... 85 C (cable, flexible installation) Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 04/03/14 Page 2 / 5 https://www.phoenixcontact.com/gb/products/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Classifications eCl@ss eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / GOST / GOST Ex Approvals Approvals submitted Approval details UL Recognized mm/AWG/kcmil 26-20 Nominal current IN 4A Nominal voltage UN 60 V 04/03/14 Page 3 / 5 https://www.phoenixcontact.com/gb/products/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Approvals GOST GOST Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread 04/03/14 Page 4 / 5 https://www.phoenixcontact.com/gb/products/1419658 Flush-type connector - SACC-DSI-M12FS-5CON-M16/0,5 - 1419658 Accessories Drawings Dimensioned drawing Dimensioned drawing O16,1 O17 +0,2 M16x1,5 45 max.4,5 Housing cutout for M16 fastening thread, mounting panel with thread 13,5 +0,1 1x45 Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with surface as protection against rotation) Schematic diagram 19,6 4 7,6 1 18 2 10 2 500 M16x1,5 5 Pin assignment M12 socket, 5-pos., A-coded, socket side view 17 3 Dimensioned drawing max. 4,5 M12 flush-type socket Circuit diagram 1 BN 2 WH 4 BK 3 BU 5 GY Contact assignment of the M12 socket (c) Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 04/03/14 Page 5 / 5