SM6T39CAE3/52 - VISHAY

SM6T Series

www.vishay.com Vishay General Semiconductor

Revision: 20-Jul-2020 1Document Number: 88385

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface-Mount TRANSZORB® Transient Voltage Suppressors

LINKS TO ADDITIONAL RESOURCES

DEVICES FOR BIDIRECTION APPLICATIONS

For bidirectional devices use CA suffix (e.g. SM6T12CA).

Electrical characteristics apply in both directions.

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in unidirectional and bidirectional

• 600 W peak pulse power capability with a

10/1000 μs waveform

• Excellent clamping capability

• Low inductance

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3 or P/NHM3

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

MECHANICAL DATA

Case: SMB (DO-214AA)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/N-M3 - halogen-free, RoHS-compliant, commercial

grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

Base P/NHM3_X - halogen-free, RoHS-compliant, and

AEC-Q101 qualified

(“_X” denotes revision code e.g. A, B, ...)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3, M3, HE3, and HM3 suffix meets JESD 201 class 2

whisker test

Polarity: for unidirectional types the band denotes cathode

end, no marking on bidirectional types

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal

PRIMARY CHARACTERISTICS

VWM 5.80 V to 188 V

VBR unidirectional 6.8 V to 220 V

VBR bidirectional 6.8 V to 220 V

PPPM 600 W

PD5.0 W

IFSM (unidirectional only) 100 A

TJ max. 150 °C

Polarity Unidirectional, bidirectional

Package SMB (DO-214AA)

SMB (DO-214AA)

3D Models

Available

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) PPPM 600 W

Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) IPPM See next table A

Power dissipation on infinite heatsink at TA = 50 °C PD5.0 W

Peak forward surge current 10 ms single half sine-wave unidirectional only (2) IFSM 100 A

Operating junction and storage temperature range TJ, TSTG -65 to +150 °C

SM6T Series

www.vishay.com Vishay General Semiconductor

Revision: 20-Jul-2020 2Document Number: 88385

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) For bidirectional devices add suffix “CA”

(2) VBR measured after IT applied for 300 μs square wave pulse

(3) For bi-polar devices with VRM = 10 V or under, the IRM limit is doubled

Note

(1) Mounted on minimum recommended pad layout

Note

(1) AEC-Q101 qualified

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

TYPE (1)

DEVICE

MARKING

CODE

BREAKDOWN

VOLTAGE

VBR AT IT (2)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

VRM

(V)

LEAKAGE

CURRENT

IRM AT VRM

(μA)

CLAMPING

VOLTAGE

VC AT IPPM

10/1000 μs

CLAMPING

VOLTAGE

VC AT IPPM

8/20 μs

αT

MAX.

10-4/°C

UNI BI MIN. MAX. (V) (A) (V) (A)

SM6T6V8A KE7 KE7 6.45 7.14 10 5.80 1000 10.5 57.0 13.4 298 5.7

SM6T7V5A KK7 AK7 7.13 7.88 10 6.40 500 11.3 53.0 14.5 276 6.1

SM6T10A KT7 AT7 9.50 10.5 1.0 8.55 10.0 14.5 41.0 18.6 215 7.3

SM6T12A KX7 AX7 11.4 12.6 1.0 10.2 5.0 16.7 36.0 21.7 184 7.8

SM6T15A LG7 LG7 14.3 15.8 1.0 12.8 1.0 21.2 28.0 27.2 147 8.4

SM6T18A LM7 BM7 17.1 18.9 1.0 15.3 1.0 25.2 24.0 32.5 123 8.8

SM6T22A LT7 BT7 20.9 23.1 1.0 18.8 1.0 30.6 20.0 39.3 102 9.2

SM6T24A LV7 LV7 22.8 25.2 1.0 20.5 1.0 33.2 18.0 42.8 93 9.4

SM6T27A LX7 BX7 25.7 28.4 1.0 23.1 1.0 37.5 16.0 48.3 83 9.6

SM6T30A ME7 CE7 28.5 31.5 1.0 25.6 1.0 41.5 14.5 53.5 75 9.7

SM6T33A MG7 MG7 31.4 34.7 1.0 28.2 1.0 45.7 13.1 59 68 9.8

SM6T36A MK7 CK7 34.2 37.8 1.0 30.8 1.0 49.9 12.0 64.3 62 9.9

SM6T39A MM7 CM7 37.1 41.0 1.0 33.3 1.0 53.9 11.1 69.7 57 10.0

SM6T68A NG7 NG7 64.6 71.4 1.0 58.1 1.0 92.0 6.50 121 33 10.4

SM6T100A NV7 NV7 95.0 105 1.0 85.5 1.0 137 4.40 178 22.5 10.6

SM6T150A PK7 PK7 143 158 1.0 128 1.0 207 2.90 265 15 10.8

SM6T200A PR7 PR7 190 210 1.0 171 1.0 274 2.20 353 11.3 10.8

SM6T220A PR8 PR8 209 231 1.0 188 1.0 328 2.00 388 10.3 10.8

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Typical thermal resistance, junction to ambient air (1) RθJA 100 °C/ W

Typical thermal resistance, junction to lead RθJL 20

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

SM6T10A-E3/52 0.096 52 750 7" diameter plastic tape and reel

SM6T10A-M3/52

SM6T10A-E3/5B 0.096 5B 3200 13" diameter plastic tape and reel

SM6T10A-M3/5B

SM6T10AHE3_A/H (1)

0.096 H 750 7" diameter plastic tape and reel

SM6T10AHM3_A/H (1)

SM6T10AHE3_A/I (1)

0.096 I 3200 13" diameter plastic tape and reel

SM6T10AHM3_A/I (1)

SM6T Series

www.vishay.com Vishay General Semiconductor

Revision: 20-Jul-2020 3Document Number: 88385

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 3 - Pulse Waveform

Fig. 4 - Typical Junction Capacitance

Fig. 5 - Typical Transient Thermal Impedance

Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current

0.1

100

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

PPM

- Peak Pulse Power (kW)

td - Pulse Width (s)

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

0 255075100

100

125 150 175 200

TJ - Initial Temperature (°C)

Peak Pulse Power (P

) or Current (I

)

Derating in Percentage, %

100

150

01.0 2.0 3.0 4.0

IPPM - Peak Pulse Current, % IRSM

t - Time (ms)

= 10 µs

Peak Value

PPM

Half Value -

PPM

10/1000 µs Waveform

as defined by R.E.A.

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

100

1000

6000

101 100 200

Uni-Directional

Bi-Directional

- Junction Capacitance (pF)

- Reverse Stand-Off Voltage (V)

TJ = 25 °C

f = 1.0 MHz

Vsig = 50 mVp-p

Measured at

Zero Bias

VR, Measured at

Stand-Off

Voltage VWM

0.1

1.0

100

0.001 0.01 0.1 10 1 100 1000

t - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

200

100

101 100

8.3 ms Single Half Sine-Wave

Uni-Directional Only

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

SM6T Series

www.vishay.com Vishay General Semiconductor

Revision: 20-Jul-2020 4Document Number: 88385

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Cathode Band

SMB (DO-214AA)

0.086 (2.20)

0.077 (1.95)

0.155 (3.94)

0.130 (3.30)

0.180 (4.57)

0.160 (4.06)

0.012 (0.305)

0.006 (0.152)

0.008 (0.2)

0 (0)

0.220 (5.59)

0.205 (5.21)

0.060 (1.52)

0.030 (0.76)

0.096 (2.44)

0.084 (2.13)

Mounting Pad Layout

0.086 (2.18) MIN.

0.060 (1.52) MIN.

0.085 (2.159) MAX.

0.220 (5.59) REF.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.