EVERLIGHT ELECTRONICS CO., LTD. DEVICE NUMBER : ECN : DHI-092-012 REV : 1.1 PAGE : 1/6 Hall Integrated Circuit Sensor MODEL NO : HI401/T19/S20 Features : 4V to 20V operation. High reliability. Small size. Output compatible with all digital logic families. Reverse voltage protection. Description : The HI401/T19/S20 is a magnetic sensor used in electric commutation of DC brushless motor applications mostly. The HI401/T19/S20 has a latching behavior and requires a magnetic north and south pole for correct function. The output does not change if the magnetic field is removed. The sensor is designed for industrial and automotive applications and operates at as low as 4 volts. Applications : Brushless DC motor. Rotation detection. Displacement detection. Speed sensing. CHIP PART HALL IC MATERIAL SI COLOR BLACK EVERLIGHT ELECTRONICS CO., LTD. DEVICE NUMBER : ECN : DHI-092-012 REV : PAGE : 1.1 2/6 Hall Integrated Circuit Sensor MODEL NO : HI401/T19/S20 NOTES Package Dimension : 1. This drawing measure is a standard value. All dimensions are in millimeter. 2. In case of designation is tolerance0.3 mm. 3. Lead spacing is measured where the leads emerge from the package. 4. Protruded resin under flange 1.0mm Max. 5. Lens color: Black. 6. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 7. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT consent. 8. When using this produce, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. Location of Hall Sensor: Reference of the top-left of package X=1.90.1mm Y=1.10.1mm EVERLIGHT ELECTRONICS CO., LTD. DEVICE NUMBER : ECN : DHI-092-012 REV : PAGE : 1.1 3/6 Hall Integrated Circuit Sensor MODEL NO : HI401/T19/S20 Absolute Maximum Ratings at TA = 25 Parameter Symbol Rating Unit Supply Voltage Vcc 20 V Supply Current Icc mA Output Current Iout Maximum Power Dissipation PD 25 Continuous 300 Hold 400 Peak(Start up) 600 500 mW Operating Ambient Temperature Storage Temperature TA -20 ~ +85 Tstg -55 ~ +120 Soldering Temperature Tsol 260 Electronic Characteristics : Parameter Symbol Notice mA 1/16 inches from body for 5 seconds TA = 25 MIN. TYP. MAX. Unit Condition --250 20 600 V mV Operating Vcc=14V IOUT=400mA B>Bop Vcc=20V Output Open VCE=14V Vcc=14V Supply Voltage Output Saturation Voltage VCE(SAT) 4 --- Supply Current Icc --- 18 25 mA Output Leakage Current --- --- 10 A Output Rise Time --- 3.0 10 --- 0.3 1.5 S S --- --- 10 S Output Fall Time Switch Time Differential Vcc t Vcc=14V, RL=820 , CL=20pF TA = 25 Magnetic Specification : Condition:Vcc=20V,Bs=MAX[ABS(Bop),ABS(Brp)] Unit:: Gauss Bin Number Bin1 Bin2 Bin3 Bin4 Bs <50 <85 <100 <150 EVERLIGHT ELECTRONICS CO., LTD. DEVICE NUMBER : ECN : Hall Integrated Circuit Sensor MODEL NO : HI401/T19/S20 Typical Characteristics Curves: DHI-092-012 REV : PAGE : 1.1 4/6 EVERLIGHT ELECTRONICS CO., LTD. DEVICE NUMBER : ECN : DHI-092-012 REV : PAGE : 1.1 5/6 Hall Integrated Circuit Sensor MODEL NO : HI401/T19/S20 Function Block Diagram Testing Circuit: Reliability: The reliability of products shall be satisfied with items listed below. Confidence level : 90% ; LTPD : 10% Test Items Test Conditions Vcc=12V,Ta=251000hrs 1 cycle -55 to +85 Temperature cycle (30min)(5min)(30min) 50 cycle test -10 to +100 Thermal shock (5min) (10sec) (5min) 50 cycle test High temperature Temp : +150 1000hrs storage Low temperature Temp : -55 1000hrs storage High temperature TA : 85 RH : 85% High humidity 1000hrs Temp : 260 10 sec Solder heat 4mm from the bottom of the package Failure Judgement Criteria Operation life Samples(n) Defective(c) n=22 , c=0 |Bop|<20Gauss |Brp|<20Gauss 0.8*L<ICC<1.2*U VSAT<1.5*U ILEAK<1.5*U L : Lower Specification Limit U : Upper Specification Limit n=22 , c=0 n=22 , c=0 n=22 , c=0 n=22 , c=0 n=22 , c=0 n=22 , c=0 EVERLIGHT ELECTRONICS CO., LTD. DEVICE NUMBER : ECN : DHI-092-012 REV : PAGE : 1.1 6/6 Hall Integrated Circuit Sensor MODEL NO : HI401/T19/S20 Packing Specifications: (UNIT : mm) Packing Quantity Specification: 1.1000Pcs/1Bag,10Bags/1Box 2.10Boxes/1Carton Label Specification: CPN : Customer's Production Number P/N : Production Number QTY : Packing Quantity CAT : Ranks HUE : Reference REF : Reference LOT NO : Lot Number MADE IN TAIWAN : Production Place