REVISIONS REV ECO DESCRIPTION DATE BY APPR A1 - FIRST RELEASE Feb.25,2016 Drack Tommy TITLE: REF 67.0 NOTES: UNLESS OTHERWISE SPECIFIED O25.8 4 P 10 16 15 8 6 5 9 7 3. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 24.9 14 MA7CAP1600-Sx XXXX 3 11 12 13 MA7CAP1600-Sx 1 DWG NO: 2. SPECIFICATIONS: 2.1 CURRENT RATING: 9 AMPS 2.2 VOLTAGE RATING: 125 V AC/DC 2.3 OPERATING TEMPERATURE: -20C TO +130C 2.4 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 2500 VOLTS AC. 2.5 DEGREE OF PROTECTION: IP67 ( MATED CONDITION ) 2.6 DEGREE OF POLLUTION: 3 PER UL840 2.7 OVERVOLTAGE CATEGORY: III PER UL840 2.8 MATING CYCLE DURABILITY: >500 CYCLES 2.9 RoHS COMPLIANT P type, Normal Key (P, 0) 2 M23A,PLUG,STR,16P,P TYPE 1. MATERIAL: INSULATION INSERT: PA66,UL94 V0 SEAL: VITON, EPDM HOUSING BODY: ZINC DIE CAST, NICKEL PLATED COUPLING NUT: COPPER ALLOY, NICKEL PLATED REV: A1 SH: 1 Item Part number Cable OD Range UNLESS OTHERWISE SPECIFIED MA7CAP1600-S1 4.5~7.5 mm 1) 2) 1 2 3 2 MA7CAP1600-S2 7.5~11.0 mm 3) Note reference = 3 MA7CAP1600-S3 11.0~15.0 mm 1 All dimensions are in metric(mm). Tolerances are as follows: PL DEC 0.30 Fractions 1/64 PL DEC 0.15 Angles 1 PL DEC 0.08 X SIGNATURES DRAWN: Drack ITEM Amphenol DATE Feb.20,2016 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: M23A,PLUG,STR,16P,P TYPE PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- NEXT ASS'Y: NONE DWG NO: REVISION MA7CAP1600-Sx SHEET 1 A1 OF 1 1 QUANTITY OF: SEE PART NUMBER CHART DESCRIPTION PART NUMBER MATERIALS LIST