VS-12TQ035SPbF, VS-12TQ040SPbF, VS-12TQ045SPbF www.vishay.com Vishay Semiconductors High Performance Schottky Rectifier, 15 A FEATURES * 150 C TJ operation Base cathode 2 * Very low forward voltage drop * High frequency operation * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance D2PAK 3 Anode 1 N/C * Guard ring for enhanced ruggedness and long term reliability * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C PRODUCT SUMMARY * AEC-Q101 qualified Package D2PAK IF(AV) 15 A VR 35 V, 40 V, 45 V VF at IF 0.50 V IRM 70 mA at 125 C TJ max. 150 C Diode variation Single die EAS 16 mJ * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The VS-12TQ...SPbF Schottky rectifier series has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS 15 A IF(AV) Rectangular waveform VRRM Range 35 to 45 V IFSM tp = 5 s sine 990 A VF 15 Apk, TJ = 125 C 0.50 V TJ Range -55 to +150 C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-12TQ035SPbF VS-12TQ040SPbF VS-12TQ045SPbF UNITS 35 40 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average forward current See fig. 5 IF(AV) 50 % duty cycle at TC = 120 C, rectangular waveform 15 A Maximum peak one cycle non-repetitive surge current See fig. 7 5 s sine or 3 s rect. pulse 990 IFSM Non-repetitive avalanche energy EAS TJ = 25 C, IAS = 2.4 A, L = 5.5 mH 16 mJ IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 2.4 A Repetitive avalanche current 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied A 250 Revision: 23-May-14 Document Number: 94138 1 For technical questions within your region: DiodesAmericas@vishay.com, iodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-12TQ035SPbF, VS-12TQ040SPbF, VS-12TQ045SPbF www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 15 A Maximum forward voltage drop See fig. 1 VFM (1) 15 A IRM (1) Maximum junction capacitance CT Typical series inductance 0.64 VR = Rated VR TJ = 125 C mA 70 900 Measured lead to lead 5 mm from package body dV/dt V 1.75 VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 C LS Maximum voltage rate of change 0.71 0.50 TJ = 125 C TJ = 25 C UNITS 0.56 TJ = 25 C 30 A 30 A Maximum reverse leakage current See fig. 2 VALUES Rated VR pF 8.0 nH 10 000 V/s VALUES UNITS -55 to +150 C Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation See fig. 4 2.0 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 C/W Approximate weight Mounting torque g 0.07 oz. minimum 6 (5) maximum 12 (10) kgf * cm (lbf * in) Case style D2PAK Marking device 12TQ045S 1000 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 2 100 TJ = 150 C TJ = 125 C TJ = 25 C 10 1 100 TJ = 150 C 10 TJ = 125 C 1 TJ = 100 C TJ = 75 C 0.1 TJ = 50 C 0.01 TJ = 25 C 0.001 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 0 5 10 15 20 25 30 35 40 45 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 23-May-14 Document Number: 94138 2 For technical questions within your region: DiodesAmericas@vishay.com, iodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-12TQ035SPbF, VS-12TQ040SPbF, VS-12TQ045SPbF www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM 0.1 0.01 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.001 0.00001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC Single pulse (thermal resistance) 0.0001 0.001 0.01 0.1 1 10 . 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics 12 12TQ RthJC (DC) = 2.0 C/W Average Power Loss (W) Allowable Case Temperature (C) 155 145 135 DC 125 D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 10 8 RMS limit 6 4 DC 2 0 115 0 4 8 12 16 20 24 0 2 4 6 8 10 12 14 16 18 20 22 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Revision: 23-May-14 Document Number: 94138 3 For technical questions within your region: DiodesAmericas@vishay.com, iodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-12TQ035SPbF, VS-12TQ040SPbF, VS-12TQ045SPbF www.vishay.com IFSM - Non-Repetitive Surge Current (A) Vishay Semiconductors 1000 At any rated load condition and with rated VRRM applied following surge 100 100 10 10 000 1000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current L High-speed switch IRFP460 D.U.T. Freewheel diode Rg = 25 Current monitor + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit ORDERING INFORMATION TABLE Device code VS- 12 T Q 045 S 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - Current rating 3 - Package: T = TO-220 4 - Schottky "Q" series 5 - Voltage ratings 6 - S = D2PAK 7 - TRL PbF 7 8 035 = 35 V 040 = 40 V 045 = 45 V None = tube (50 pieces) TRL = tape and reel (left oriented) TRR = tape and reel (right oriented) 8 - PbF = lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95014 Part marking information www.vishay.com/doc?95008 Packaging information www.vishay.com/doc?95032 Revision: 23-May-14 Document Number: 94138 4 For technical questions within your region: DiodesAmericas@vishay.com, iodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors D2PAK, TO-262 DIMENSIONS - D2PAK in millimeters and inches Conforms to JEDEC outline D2PAK (SMD-220) (2)(3) E B Pad layout A A (E) c2 11.00 MIN. (0.43) A (3) L1 4 9.65 MIN. (0.38) (D1) (3) Detail A D H 1 2 17.90 (0.70) 15.00 (0.625) (2) 3 3.81 MIN. (0.15) L2 B B 2.32 MIN. (0.08) A 2 x b2 c 2.64 (0.103) 2.41 (0.096) (3) E1 C View A - A 2xb 0.004 M B 0.010 M A M B Plating 2x e Base Metal (4) b1, b3 H Gauge plane Seating plane Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode SYMBOL MILLIMETERS MIN. c1 (4) (c) B 0 to 8 L3 Lead tip A1 L (b, b2) L4 Section B - B and C - C Scale: None Detail "A" Rotated 90 CW Scale: 8:1 INCHES MAX. MIN. MAX. NOTES SYMBOL MILLIMETERS MIN. INCHES MAX. MIN. MAX. NOTES A 4.06 4.83 0.160 0.190 D1 6.86 8.00 0.270 0.315 3 A1 0.00 0.254 0.000 0.010 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 D 8.51 9.65 0.335 0.380 4 2.54 BSC 0.100 BSC H 14.61 15.88 0.575 0.625 4 L 1.78 2.79 0.070 0.110 L1 - 1.65 - 0.066 4 L2 1.27 1.78 0.050 0.070 L3 2 Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch Document Number: 95014 Revision: 31-Mar-09 e L4 (7) 0.25 BSC 4.78 5.28 3 0.010 BSC 0.188 0.208 Outline conforms to JEDEC outline TO-263AB For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Outline Dimensions D2PAK, TO-262 Vishay Semiconductors DIMENSIONS - TO-262 in millimeters and inches Modified JEDEC outline TO-262 (Datum A) (2) (3) E A A c2 B E A (3) L1 Seating plane D 1 2 3 C L2 B D1 (3) B C L (2) A c 3 x b2 3xb E1 A1 (3) Section A - A 2xe Plating 0.010 M A M B (4) b1, b3 Base metal Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip SYMBOL A c1 c (4) (b, b2) Section B - B and C - C Scale: None MILLIMETERS INCHES MIN. MAX. MIN. MAX. 4.06 4.83 0.160 0.190 0.119 A1 2.03 3.02 0.080 b 0.51 0.99 0.020 0.039 b1 0.51 0.89 0.020 0.035 b2 1.14 1.78 0.045 0.070 b3 1.14 1.73 0.045 0.068 c 0.38 0.74 0.015 0.029 c1 0.38 0.58 0.015 0.023 c2 1.14 1.65 0.045 0.065 NOTES 4 4 4 D 8.51 9.65 0.335 0.380 D1 6.86 8.00 0.270 0.315 3 E 9.65 10.67 0.380 0.420 2, 3 E1 7.90 8.80 0.311 0.346 3 e 2.54 BSC 0.100 BSC L 13.46 14.10 0.530 0.555 L1 - 1.65 - 0.065 L2 3.56 3.71 0.140 0.146 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Controlling dimension: inches www.vishay.com 2 2 (6) 3 Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) and D1 (minimum) where dimensions derived the actual package outline For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 95014 Revision: 31-Mar-09 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-12TQ045STRLPBF VS-12TQ035SPBF VS-12TQ035STRLPBF VS-12TQ040STRRPBF 12TQ035 12TQ035S 12TQ035STRL 12TQ035STRR 12TQ040 12TQ040S 12TQ045 12TQ045S 12TQ045STRL 12TQ045STRR VS12TQ045SPBF VS-12TQ045STRRPBF VS-12TQ040STRLPBF VS-12TQ035STRRPBF VS-12TQ040SPBF