!"
!"
!"
!"
!"
!" !"#
$
,
!" -."
!" /0-".
.!#/#1+12.1+3
!" "-.4
!" 5-36+07869
!" ."-
!" .4-/:0
:
"
!"#$
%&#'()(#(*)+,)*$"*#($
-((*#($)$("./0
'(12*2*3#(&
41&'(12*3#(&
5!#1&3#(&
3
3
3
6 7 3
28%2*3#(& 3 9 : 6 7 6 : 3
;*(&2$<""!"
! =;
>?2*'(1-($%"&!"
79%&#(#?(*"$
($#($@AB5B!8$C
= ;
-($3#(&@#C=
9; 33
'(12*!"
!
;2($5!#1&3#(&
! =
D;
;
2(&-"&@E79C@>C = ;
/(#(#2(@>C 2 6 4
<(&($%(&("2(& ? !
> >?*F($E79
(#(G"(#"$'!.($9H9H91#($((
1316A
• !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
!"$%&'223064
0.1
1.0
10
I , INSTANTANEOUS FWD CURRENT (A)
F
V , INSTANTANEOUS FWD VOLTAGE (V)
Fig.2TypicalForwardCharacteristics, per element
F
T = 25ºC
Pulse Width = 300 ms
j
100
0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
0
50
100
150
200
250
1 10 100
8.3ms Single Half Sine-Wave
JEDEC Method
I , PEAK FWD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Peak Fwd Surge Current
10
100
400
1 10 100
C , CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance Per Element
R
T = 25ºC
f = 1MHz
j
0.01
0.1
1.0
10
0 20 40 60 80 100 120 140
I , INSTANTANEOUS REVERSE CURRENT (mA)
R
RATED PERCENT OF PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
T = 25ºC
j
T = 100ºC
j
0
1
2
3
4
5
20 40 60 80 100 120 140
I , AVERAGE OUTPUT CURRENT (A)
(AV)
T , CASE TEMPERATURE (ºC)
Fig. 1 Forward Current Derating Curve
C
Single Phase Half Wave
60 Hz Resistive or Inductive Load
6
1316A
• !!"#$•
•%&'(&)*+,,---.&./0•12&%#%3&./0•
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
