Axial Lead and Cartridge Fuses Designed to IEC Standard 5 x 20 mm Time Lag Fuse (Slo-Blo (R) Fuse) 218/213 Series D (R) (R) V E * Designed to International (IEC) Standards for use globally. * Meets the IEC 60127-2, Sheet 3 specification for Time Lag Fuses. * Available in Cartridge and Axial Lead Form. * Available in ratings of 0.032 to 15 amperes. ELECTRICAL CHARACTERISTICS (218 Series): 275% 400% 1000% .032 - 15 .032 - .100 .125 - 15 .032 - .100 .125 - 15 .032 - .100 .125 - 15 2 minutes, Maximum 0.2 sec., Min.; 10 sec. Max. 0.6 sec., Min.; 10 sec. Max. .04 sec., Min.; 3 sec. Max. .15 sec., Min.; 3 sec. Max. .01 sec., Min.; 0.3 sec. Max. 0.02 sec., Min.; 0.3 sec. Max. 213 000 218 000 .65* (.026") AGENCY APPROVALS: Sheet III IEC 60127-2:* 218 Series Approvals: SEMKO, VDE approved thru 6.3 amps. BSI approved 0.08-6.3 amps. Recognized under the Components Program of Underwriters Laboratories and recognized by CSA through 15 amps. METI approved 1-15 amps. CCC approved through 6.3 amps. K Mark approved through 10 amps. VOLTAGE RATING: 250 VAC INTERRUPTING RATINGS: 35 amperes or 10 x rated current; (whichever is greater) to a maximum 100A @ 250 VAC, unity power factor. ORDERING INFORMATION: For axial leaded add suffix XE 218 213 000 XE 218 000 XE 213 Surge Withstand Ampere Rating Cartridge Catalog Number Nominal Resistance Cold Ohmns Nominal Melting I2t A2Sec. Cartridge Catalog Number Nominal Resistance Cold Ohms Nominal Melting I2t A2Sec. .032 .040 .050 .063 .080 .100 .125 .160 .200 .250 .315 .400 .500 .630 .800 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8 10 15 218.032 218.040 218.050 218.063 218.080 218.100 218.125 218.160 218.200 218.250 218.315 218.400 218.500 218.630 218.800 218 001 218 1.25 218 01.6 218 002 218 02.5 218 3.15 218 004 218 005 218 06.3 218 008 218 010 218 015 58.45 35.70 23.30 18.1 12.6 8.95 4.41 2.44 1.60 1.05 0.848 0.535 0.370 0.275 0.073 0.055 0.042 0.032 0.029 0.022 0.017 0.013 0.010 0.0075 0.0059 0.0045 0.0030 0.00305 0.0055 0.0071 0.012 0.0265 0.0495 0.150 0.225 0.350 0.555 1.14 1.35 2.90 4.80 1.99 3.33 5.80 10.61 14.80 23.85 39.20 70.95 114.0 204.0 350.5 583.0 1441.0 - - - - - - - - 0213.200 0213.250 0213.315 0213.400 0213.500 0213.630 0213.800 0213 001. 0213 1.25 0213 01.6 0213 002. 0213 02.5 0213 3.15 0213 004. 0213 005. 0213 06.3 - - - - - - - - - - 1.60 1.05 0.848 0.535 0.370 0.275 0.165 0.117 0.081 0.055 0.044 0.030 0.022 0.017 0.011 0.008 - - - - - - - - - - 0.350 0.555 1.14 1.35 2.90 4.80 9.42 19.20 27.15 44.2 92.7 138.0 226.5 202 314 600 - - 5.2 (.205") 20 (.787") 6.0 MAX (.236") 22.5 MAX (.886) 40 (1.58") *Ratings above 6.3A have 0.8mm dia lead Average Time Current Curves for 218/228 100 10 11 1 AXIAL LEAD AND CARTRIDGE FUSES 210% Opening Time 60 minutes, Minimum 30 minutes, Minimum .032A .040A .050A .063A .080A .100A .125A .160A .200A .250A .315A .400A .500A .630A .800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 15A 150% Ampere Rating .032 - 6.3 8 - 15 TIME IN SECONDS % of Ampere Rating 0.1 0.01 0.001 0.05 0.1 1 10 CURRENT IN AMPERES 100 500 * IEC Standards for 5 x 20 fuses do not include ratings above 6.3A, but are under consideration. VDE approval on XE versions pending w w w. l i t t e l f u s e . c o m 401