PFW5000 - PFW5010 W TE PO WE R SEM IC O ND U C TO RS 50A FLAG LEAD 1/2" PRESS-FIT DIODE Features ! Diffused Junction ! ! ! ! Low Leakage Low Cost High Surge Current Capability Typical IR less than 10A J D Mechanical Data ! ! ! ! ! H Case: All Copper Case and Components Hermetically Sealed Terminals: Contact Areas Readily Solderable Polarity: Cathode to Case(Reverse Units Are Available Upon Request and Are Designated By An "R" Suffix, i.e. PFW5002R or PFW5010R) Polarity: Red Color Equals Standard, Black Color Equals Reverse Polarity Mounting Position: Any C DO-21 Dim Min Max A 15.63 16.14 B 12.75 12.83 C 8.89 10.04 D 1.25 O 1.30O E 3.05 3.30 G 5.59 6.10 H 10.42 12.45 J 26.10 27.40 All Dimensions in mm E G B A Maximum Ratings and Electrical Characteristics @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol PFW5000 PFW5001 PFW5002 PFW5004 PFW5006 PFW5008 PFW5010 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA = 150C VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 50 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 500 A Forward Voltage VFM 1.08 V Peak Reverse Current @TA = 25C At Rated DC Blocking Voltage @TA = 100C IRM 10 500 A Typical Junction Capacitance (Note 1) Cj 300 pF RJC 1.2 K/W -65 to +175 C Typical Thermal Resistance Junction to Case (Note 2) @IF = 100A Operating and Storage Temperature Range TJ, TSTG *Glass passivated forms are available upon request Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled. PFW5000 - PFW5010 1 of 2 (c) 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity PFW5000 Press Fit 100 Units/Tray PFW5001 Press Fit 100 Units/Tray PFW5002 Press Fit 100 Units/Tray PFW5004 Press Fit 100 Units/Tray PFW5006 Press Fit 100 Units/Tray PFW5008 Press Fit 100 Units/Tray PFW5010 Press Fit 100 Units/Tray Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com PFW5000 - PFW5010 We power your everyday. 2 of 2 (c) 2002 Won-Top Electronics