Document Number: 30114 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com
Revision: 04-Feb-11 1
Wirewound Resistors, Commercial Power, Axial Lead
CA High Volume
Vishay Dale
FEATURES
• High performance for low cost
• Auto insertable
• High temperature coating for environmental
protection
• Compliant to RoHS Directive 2002/95/EC
APPLICATIONS
Kitchen appliances:
• Percolators, blenders, mixers, ranges, toasters, deep
fryers
Entertainment and consumer devices:
• Radios, televisions
• Computers and power supplies
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL
POWER RATING
P25 °C
W
RESISTANCE RANGE
TOLERANCE
± %
WEIGHT
(typical)
g
CA0001 1.0 0.1 to 1K 5, 10 0.65
CA0002 2.0 0.1 to 1K 5, 10 0.80
TECHNICAL SPECIFICATIONS
PARAMETER UNIT CA HIGH VOLUME RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 350
Short Time Overload - 5 x rated power for 5 s
Maximum Working Voltage V (P x R)1/2
Dielectric Withstanding Voltage VAC 350
Operating Temperature Range °C - 65 to + 275
Terminal Strength (minimum) lb 10
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CA000150R00JE66
GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL
(See Standard Electrical
Specifications table/
Global Model column
for options)
R = Decimal
K = Thousand
R1500 = 0.15
1K000 = 1000
J = ± 5.0 %
K = ± 10.0 %
E66 = Lead (Pb)-free, tape/reel (Dash Number)
(up to 3 digits)
From 1 to 999 as
applicable
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
0015 R000A0 JE6C 6
www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30114
2Revision: 04-Feb-11
CA High Volume
Vishay Dale Wirewound Resistors, Commercial
Power, Axial Lead
DIMENSIONS
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core: Ceramic
Coating: Special high temperature material
Terminals: Tin plated copper
End Caps: Tin plated steel
Part Marking: E24 color bands
DERATING
LL
LLD
D
GLOBAL
MODEL
DIMENSIONS in inches [millimeters]
L
± 0.040
[1.0]
D
± 0.020
[0.5]
LD
± 0.002
[0.05]
LL
± 0.079
[2.0]
CA0001 0.354
[9]
0.138
[3.5]
0.024
[0.6]
1.024
[26]
CA0002 0.453
[11.5]
0.177
[4.5]
0.031
[0.8]
1.378
[35]
RATED POWER IN %
AMBIENT TEMPERATURE IN °C
25
0
20
40
60
80
100
120
- 55 75 275- 25 175 225
125
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal Shock - 55 °C to + 275 °C, 5 cycles, 30 min dwell time ± (5.0 % + 0.05 ) R
Short Time Overload 5 x rated power for 5 s ± (1.0 % + 0.05 ) R
Dielectric Withstanding
Voltage 350 VAC for 1 min ± (2.0 % + 0.05 ) R
Low Temperature Operation - 65 °C, full rated working voltage for 45 min ± (3.0 % + 0.05 ) R
Humidity 75 °C, 90 % - 100 % RH, 240 h ± (5.0 % + 0.05 ) R
Load Life 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 ) R
Terminal Strength 10 pounds for 30 s; body twisted about axis, 3 x 360° rotations ± (2.0 % + 0.05 ) R
Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body ± (1.0 % + 0.05 ) R
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
