SA5.0(C)A - SA170(C)A
SA5.0(C)A - SA170(C)A, Rev. A2
SA5.0(C)A - SA170(C)A
500 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
2001 Fairchild Semiconductor Corporation
Symbol
Parameter
Value
Units
PPPM Peak Pulse Power Dissipation on 10/1000 µs waveform minimum 500 W
IPPM Peak Pulse Current on 10/1000 µs waveform see table A
PM(AV) Steady State Power Dissipation
.375 " lead length @ TA = 75°C
1.0 W
IFSM Non-repetitive Peak Forward Surge Current
superimposed on rated load (JEDEC method) (Note 1)
70
A
Tstg Storage Temperature Range -65 to +175 °C
TJ Operating Junction Temperature -65 to +175 °C
Features
•Glass passivated junction.
•500W Peak Pulse Power capability on
10/1000 µs waveform.
•Excellent clamping capability.
•Low incremental surge resistance.
•Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
•Typical IR less than 1.0 µA above 10V.
DEVICES FOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
DO-15
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY. NO
COLOR BAND ON BIDIRECTIONAL
DEVICES.
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
SA5.0(C)A - SA170(C)A
SA5.0(C)A - SA170(C)A, Rev. A2
Transient Voltage Supressors
(continued)
Electrical Characteristics TA = 25°C unless otherwise noted
* For bidirectional parts with VRWM<10V, the IR max limit is doubled.
Uni-directional
Bi-directional (C)
Device
Reverse
Stand-off Voltage
VRWM (V)
Breakdown Volta
g
e
VBR (V)
min max
Test
Current
IT (mA)
Max Clamping
Voltage @IPPM
VC (V)
Max Peak Pulse
Surge Current
IPPM (A)
Max Reverse
Leakage VRWM
IR (uA)*
SA5.0(C)A 5.0 6.40 7.00 10 9.2 54.3 600
SA6.0(C)A 6.0 6.67 7.37 10 10.3 48.5 600
SA6.5(C)A 6.5 7.22 7.98 10 11.2 44.7 400
SA7.0(C)A 7.0 7.78 8.60 10 12.0 41.7 150
SA7.5(C)A 7.5 8.33 9.21 1.0 12.9 38.8 50
SA8.0(C)A 8.0 8.89 9.83 1.0 13.6 36.7 25
SA8.5(C)A 8.5 9.44 10.4 1.0 14.4 34.7 10
SA9.0(C)A 9.0 10.0 11.1 1.0 15.4 32.5 5
SA10(C)A 10 11.1 12.3 1.0 17.0 29.4 1
SA11(C)A 11 12.2 13.5 1.0 18.2 27.4 1
SA12(C)A 12 13.3 14.7 1.0 19.9 25.1 1
SA13(C)A 13 14.4 15.9 1.0 21.5 23.2 1
SA14(C)A 14 15.6 17.2 1.0 23.2 21.5 1
SA15(C)A 15 16.7 18.5 1.0 24.4 20.6 1
SA16(C)A 16 17.8 19.7 1.0 26.0 19.2 1
SA17(C)A 17 18.9 20.9 1.0 27.6 18.1 1
SA18(C)A 18 20.0 22.1 1.0 29.2 17.2 1
SA20(C)A 20 22.2 24.5 1.0 32.4 15.4 1
SA22(C)A 22 24.4 26.9 1.0 35.5 14.1 1
SA24(C)A 24 26.7 29.5 1.0 38.9 12.8 1
SA26(C)A 26 28.9 31.9 1.0 42.1 11.9 1
SA28(C)A 28 31.1 34.4 1.0 45.4 11.0 1
SA30(C)A 30 33.3 36.8 1.0 48.4 10.3 1
SA33(C)A 33 36.7 40.6 1.0 53.3 9.4 1
SA36(C)A 36 40.0 44.2 1.0 58.1 8.6 1
SA40(C)A 40 44.4 49.1 1.0 64.5 7.8 1
SA43(C)A 43 47.8 52.8 1.0 69.4 7.2 1
SA45(C)A 45 50.0 55.3 1.0 72.7 6.9 1
SA48(C)A 48 53.3 58.9 1.0 77.4 6.5 1
SA51(C)A 51 56.7 62.7 1.0 82.4 6.1 1
SA54(C)A 54 60.0 66.3 1.0 87.1 5.7 1
SA58(C)A 58 64.4 71.2 1.0 93.6 5.3 1
SA60(C)A 60 66.7 73.7 1.0 96.8 5.2 1
SA64(C)A 64 71.1 78.6 1.0 103.0 4.9 1
SA70(C)A 70 77.8 86.0 1.0 113.0 4.4 1
SA75(C)A 75 83.3 92.1 1.0 121.0 4.1 1
SA78(C)A 78 86.7 95.8 1.0 126.0 4.0 1
SA85(C)A 85 94.4 104.0 1.0 137.0 3.6 1
SA90(C)A 90 100.0 111.0 1.0 146.0 3.4 1
SA100(C)A 100 111.0 123.0 1.0 162.0 3.1 1
SA110(C)A 110 122.0 135.0 1.0 177.0 2.8 1
SA120(C)A 120 133.0 147.0 1.0 193.0 2.7 1
SA130(C)A 130 144.0 159.0 1.0 209.0 2.4 1
SA150(C)A 150 167.0 185.0 1.0 243.0 2.1 1
SA160(C)A 160 178.0 197.0 1.0 259.0 1.9 1
SA170(C)A 170 189.0 209.0 1.0 275.0 1.8 1
SA5.0(C)A - SA170(C)A
SA5.0(C)A - SA170(C)A, Rev. A2
Transient Voltage Supressors
(continued)
Typical Characteristics
Steady State Power Derating Curve
0 25 50 75 100 125 150 175 200
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
LEAD TEMPERATURE ( C)
POWER DISSIPATION (W)
º
Pulse Derating Curve
0 25 50 75 100 125 150 175 200
0
25
50
75
100
AMBIENT TEMPERATURE ( C)
PULSE POWER (%)
º
Non-Repetitive Surge Current
12 51020 50100
10
20
50
100
NUM BER OF CYCLES AT 60Hz
FORWARD SURGE CURRENT (A)
T = T max
8.3ms Single Half Sine-Wave
JEDEC Method
A A
Pulse Waveform
01234
0
50
100
150
TIME (ms)
PEAK PULSE CURRENT (%)
T = 25 C
º
A
Pulse Width (td) is Defined
as the Point Where the Peak
Current Decays to 50% of Ipp
10/1000µ
µµ
µsec Waveform
as Defined by R.E.A.
tf = 10µ
µµ
µsec
e-kt
Peak Value
Ippm
Half Value-Ipp
2
td
Peak Pulse Power Rating Curve
0.0001 0.001 0.01 0.1 1 10
0.1
1
10
100
PULSE WIDTH (ms)
PULSE POWER (kW)
T = 25 C
º
A
Junction Capacitance - Unidirectional
1 5 10 50 100 200
10
20
50
100
200
500
1000
2000
4000
6000
REVERSE VOLTAGE (V)
CAPACITANCE (pF)
T = 25 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
Measured at
Zero Bias
Measured at
Stand-Off
Voltage (V mw)
DO-15 Tape and Reel Data
August 2000, Rev . A©2000 Fairchild Semiconductor International
DO-15 Packaging
Configuration: Figure 1.0
Kraft Paper wounded
between layers
Corrugated Outer liner
Red/Blue (Cathode)
White (Anode)
F63TNR/Human
Readable Label
340mm x 340mm x 410mm
(20,000 max)
DO-15 TNR
Intermediate Container
Options
DO-15 Packaging Information
Note/Comments
Packaging Option
Packaging type
Reel Size (inch diameter)
Qty per Reel/Tube/Bag
Int Box Dimension (mm)
Max qty per Box
Weight per unit (gm)
Weight per Reel (kg)
Inside Tape Spacin g (mm)
Under package
code P2
TNR
13
4,000
340x340x410
20,000
0.400
1.500
52
DO-15 Packaging
Information Table : Figure 2.0
F63TNR Label sample
LOT: CBVK741B019
FSID: 1N5391
D/C1: T0030 QTY1: SPEC REV:
SPEC:
QTY: 4000
D/C2: QTY2: CPN:
FAIRCHILD SEMICONDUCTOR INTERNATIONAL (F63TNR)3.2
Human Readable Label sample
TAPING DIMENSIONS
INCH MM MILS NOTES
A2.520 64.00 2519 Overall width
+0.066/ +1.69/ +66.5/
-0.027 -0.69 -27.0
1.496 38.00 1496
+0.059/ +1.5 +59
-0.039 -1.0 -39
B2.047±0.027 52 ±0.69 2047±27 Inside Tape Spacing
C0.200 ±0.0157 5.08 ±0.40 200 ±15.7 Component Pitch
D0.047(max) 1.2(max) 47(max) Component Misalignment
E0.022(max) 0.55(max) 22(max) Tape Mismatch
F0.027(max) ±0.69 ±27 Units in line w/ one another
G0.126(min) 3.2(min) 126(min) Lead amount between tapes
H0 0 0 Lead amount beyond tapes
L1-L2 ± 0.027 ±0.69 ±27 Delta between two leads
REEL DIMENSIONS
ITEM DESCRIPTION SYMBOL MINIMUM MAXIMUM
Reel Diameter D1 13.875 14.125
Arbor Hole Diameter (Standard) D2 1.245 1.255
Core Diameter D3 3.190 3.310
Flange to Flange Outer Width W1 3.400
Note: All Dimensions are in inches
DO-15 Taping
Dimension: Figure 5.0
D3
W1
D1
D2
A
F
CD
L2
L1
E
B
G
H
CAUTION: This container provides protection for static sensitive devices. Handle devices with caution upon remo v al.
MADE IN ONE OR MORE OF THE FOLLOWING COUNTRIES: PHILIPPINES (MACTAN,
EXPORT PROCESSING ZONE), MALAYSIA, CHINA, S. KOREA, TAIWAN, THAILAND,
SINGAPORE AND JAP AN.
ANTI-STATIC
1N5391
I.D.Qty
D/C Lot
T0030 CBVK741B019
4000
DO-15 (FS PKG Code P2)
DO-15 Package Dimensions
August 1999, Rev. A
1:1
Scale 1:1 on letter size paper
Dimensions shown belo w are in:
inches [millimeters]
Part Weight per unit (gram): 0.4
1.0 min (25.4)
0.140 (3.56)
0.104 (2.64)
0.034 (0.86)
0.028 (0.71)
0.300 (7.62)
0.230 (5.84)
∅
∅
©2000 Fairchild Semiconductor International
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF F AIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART START™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Rev . G
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
FAST
SyncFET™
TinyLogic™
UHC™
VCX™
