The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. QR/P SERIES PLUG-IN CRIMP CONNECTORS General QR/P series connectors have been developed for Plugin Connection Power and Signal Circuits in copier machine or other equipments which impose the connectors repeated insertion and extraction for maintenence work of them Available number of pins are 4, 8, 12, 16, and 24. Wire termination is done by crimping which offers higher reliability, Especially, the unique sexless contact assures soft and smooth coupling operation which is the most appropriate for Plug-in connection by machine itself. Features (1) The selective plating sexless contact is commonly used for plug and receptacle housings. (2) As QR/P series are crimp type connectors their housing and contacts are supplied separately. The sexless feature of the contact offers customers higer utilization and easier inventory control. (3) The two pairs of contacts at both ends are sequenced for power circuits. They are longer than the others. The molding material is UL94V-0 glass-reinforced polyester. (4) The Guide Pin is made of steel nickel plated to be strong enough against accidental coupling shock. (5) The mount of a receptacle housing is done through Floating Bushes. Thus, they may help to give smoother coupling of connectors by a self-adjusting function. Applications Main applications are PPC, Data Communications, Vending Machines, Instrument, Automatic Equipment, etc. 139 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Material and Finish QR/PMainRating Material Contactresistance 10 orlessatDC1A Insulationresistance 5000M orlessatDC500V Withstand voltage (1min.) Power AC3000V Signal AC1000V Power 13AMax(AWG#14use) Current rating Voltage rating Insulator Contact PBT* Blue Phosphorbronze Selectivegoldover NickelPlating UL94V-0 Signal 7AMax(AWG#14use) Power AC600V Signal AC250V RatingsauthorizedbyQR/Psafetystandards Standardsafety UL operating temperature Rated voltage -1060 Power AC120V AC125V Signal AC250V,DC300V AC125V,DC150V AWG#14 10A Rated current TUV CSA 10A AWG#16 5A AWG#18 3A 5A 2A 2.5A 1A 1A AWG#20 3A AWG#22 AWG#24 Ordering Information Connector Unit QR/P- 8P- C01 (1) Contact (2) (3) (4) (9) QR/P- XC- 111 (1) (5) (4) (6)(7)(8) (1) Series Name (2) No.of Pin 4, 8, 12, 16, 24 (3) Type of Housing P: Plug Housing S: Receptacle Housing (4) Type of Termination C: Crimping (5) Sexless Contact (6) Contact Type 1: Loose Contact 2: Chain Contact (7) Applicable Wire 1: AWG # 14 - # 16 2: AWG # 18 - # 24 (8) Finish 1: Selective Gold over Nickel plating (9) UL, CSA, TUV Approved Spec. 140 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug Housing Unit:mm HRSNo. No.ofPin PartNo. L P H E CL221-0013-0-01 4 QR/P-04P-C01 41 31 5 18.5 CL221-0001-0-01 8 QR/P-08P-C01 52 42 5 18.5 CL221-0002-3-01 12 QR/P-12P-C01 61 51 5 18.5 CL221-0003-6-01 16 QR/P-16P-C01 70 60 5 18.5 CL221-0004-9-01 24 QR/P-24P-C01 86.5 77 5.5 18 HRSNo. No.ofPin PartNo. L P CL221-0014-2-51 4 QR/P-04S-C51 41 31 CL221-0005-1-51 8 QR/P-08S-C51 52 42 CL221-0006-4-51 12 QR/P-12S-C51 61 51 CL221-0007-7-51 16 QR/P-16S-C51 70 60 CL221-0008-0-51 24 QR/P-24S-C51 86.5 77 RoHS Receptacle Housing FloatingBush MINFloat0.4mm Unit:mm RoHS Sexless Crimp Contact Unit:mm ApplicableWire AWG#14-16 AWG#18-24 HRSNo. PartNo. Type Plating CL221-0009-2-12 QR/P-XC-11112 Loose CL221-0011-4-12 QR/P-XC-21112 Chain Selectivegold CL221-0010-1-12 QR/P-XC-12112 Loose overNickelPlating CL221-0012-7-12 QR/P-XC-22112 Chain RoHS Note* Loose-piece terminals are available in packs. Each pack contains 100 terminals. Strip terminals are available in reels. Each reel contains QR/P-XC-221 Pin 3,500. QR/P-XC-221 Pin 5,000 terminals. 141 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. How To Use Connectors QR/P series connectors are primarily used in Plug-in Connection and the use is shown below. MountPanel QR/P-CX QR/P- P-C FloatingBush (MIN.Float0.4mm) QR/P-S-C Note: Determine the combinations with the panel so that the mating clearance between the P side and S side is 2 mm or less. Recommended Mounting Hole (for S Insulation Case) No.ofpin Max Rear Mounting Front Mounting 4 pin 8 pin 12 pin 16 pin 24 pin A 31 42 51 60 70 B 26.5 37.5 46.5 55.5 73.5 C 23 34 43 52 70 D 18.5 29.5 38.5 47.5 65.5 E 31 42 51 60 77 F 15.5 26.5 35.5 44.5 62.5 Note: Panel mounting dimensins for the P insulation case are symmetrical with request to the vertical axis, in relation to the S insulation case. Tools HRSNo. Item ApplicableContact ApplicableCable CL250-0027-0 TC-2100-111 QR/P-XC-111 AWG#14-#16 CL250-0028-2 TC-2100-121 QR/P-XC-121 AWG#18-#24 Applicator CL901-2531-8 AP105-QR/P-XC-221 QR/P-XC-221 AWG#18-#24 Contact ExtractionTool CL250-0009-8 TC-2100-21 HandCrimp Tool Hand Crimp Tool 142 PartNo. Contact Extraction Tool Auto Crimp Tool CM-105 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Assembling Procedure m .5m ut3 abo Crimped After assembling, please make sure if the contact is installed as shown in the left by pulling the cable slightly. Procedure for Contact Extraction In case of extracting a contact from the housing in insertion error or in circuit change, follow the steps as shown below. Contact Extrator Spring (Pullthewire) Fig. 1 1. Hold the Contact Extractor, placing the tip of the Extractor on the tip of a contact, then insert it between the contact and the housing, following to the Fig. 1. 2. When the tip of the Extractor comes into contact with a stepped part in the housing, the spring will come off from the stepped part with a snap which is felt. Then, extract the contact by pulling the wire. Fig. 2 3. Above Fig. 1 and Fig. 2 show how to extract a contact from socket housing. The same procedure can be employed to extract a contact from pin housing. 4. When the extracted contact is installed again in the housing, do not forget to raise up the contact spring to the original position. 143 04/2009 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: QR/P-XC-121(07) WI Crimper 105-QR/P-XC-2 QR/P10-12P-C QR/P10-12S-C QR/P10-32P-C QR/P10-32S-C QR/P10-14P-C QR/P10-14S-C QR/P14-14P-C QR/P14-14S-C QR/P14-18S-C QR/P14-18P-C QR/P17-10P4SCA(51) QR/P17-10S4PC-B(51) QR/P17-14P-A(51) QR/P17-14S-B(51) QR/P17-18S-B(50) QR/P17-18S-B1(50) QR/P11-8S-C(09) QR/P17A-SCA-211