REV, 6/3/05 DATE REV ECN APP'D, BY 1/23/06 | B2 | 7454 JM 6/23/08 | B3 | 7663 iM SS. ar oO =__FY oS _ _ =__FY =__FY oS _ So > 060 [1.52] | _ = & = 3, 670 [17.02] MAX~ 3 = 640 [16.26] MAX +| 187 [4.75}.010 [0.25] 1 (MEASURED AT FACE OF CONNECTOR) 75 31 5 L [|] = L = ot Hg ft me [3.18] = 155 [3.94].010 [0.25] S NOTES: 3 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V-0 CONTACTS/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER 100 [2.54] (6) 7 [- (218 [5.55)) (4) 2. FOR PRODUCT SPECIFICATIONS SEE PRO26-01. 050 [1.27] (7 SS 3. DIMENSIONS AND TOLERANCES COMPLY WITH FCC/CFR 47, PART 68. [1.27] (7) a 050 [1.27] 9.035 [0.89] +.003 [0.08] (8) 100 [2.54] 30 MICRO-INCHES [0.76 100 [2 - ./6um - A-NF-O1- \ olo-o-4 P [ ]} SS650810SANF01A125 9.065 [1.65] +.003 [0.08] (2) CONTACT PLATING PART NUMBER Np. tf IN MATING AREA PNET | Or ag) 280 [6.385] Go Pr--- ! a ns Baal THIRD ANGLE PROJECTION B l S C 4128 [3.25] 9 el Stewart Connector 125 [3.18] ~ .085 [2.16] ) + M118 Susquehanna Trail South ++.450 [11.43] (717) 335-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com 620 [15.75] Ee = EIGHT CONTACT, TEN POSTION; VERTICAL MOUNT SHIELDED JACK P.C.B. RECOMMENDED HOLE LAYOUT toHS | CHANGE WITHOUT NOTICE NON-FLANGED, GROUNDING TABS @ 25, 3 BEND CONTACT SEEN FROM COMPONENT SIDE DIMENSIONS: INCHES [METRIC] | THIS DRAWING AND THE SUBNECT MATTER SHOWN THEREON |PRNBY | DAIED ga ALL CENTERLINE DIMENSIONS ARE BASIC. UNLESS OTHERWISE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: BC DATE 7-5-99 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN nas CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT | DWG NO. REV. vee 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. C1650097 BS 2 1 AutoCAD