2N2907A Silicon PNP Transistor Data Sheet Description Applications Semicoa Semiconductors offers: * General purpose * Low power * PNP silicon transistor * Screening and processing per MIL-PRF-19500 Appendix E * JAN level (2N2907AJ) * JANTX level (2N2907AJX) * JANTXV level (2N2907AJV) * JANS level (2N2907AJS) * JANSR level (2N2907AJSR) * JANSF level (2N2907AJSF) * QCI to the applicable level * 100% die visual inspection per MIL-STD-750 method 2072 for JANTXV and JANS Features * Radiation testing (total dose) upon request * * * * Hermetically sealed TO-18 metal can Also available in chip configuration Chip geometry 0600 Reference document: MIL-PRF-19500/291 Benefits * Qualification Levels: JAN, JANTX, JANTXV, JANS,JANSR and JANSR * Radiation testing available Please contact SEMICOA for special configurations www.SEMICOA.com or (714) 979-1900 Absolute Maximum Ratings Parameter Collector-Emitter Voltage TC = 25C unless otherwise specified Symbol VCEO Rating 60 Collector-Base Voltage VCBO 60 Unit Volts Volts Emitter-Base Voltage VEBO 5 Volts IC 600 mA PT 0.5 3.08 RJA 325 W mW/C C/W TJ -65 to +200 C TSTG -65 to +200 C Collector Current, Continuous O Power Dissipation, TA = 25 C Derate linearly above 37.5 OC Thermal Resistance Operating Junction Temperature Storage Temperature Copyright 2010 Rev. J SEMICOA Corporation 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 www.SEMICOA.com Page 1 of 1 2N2907A Silicon PNP Transistor Data Sheet ELECTRICAL CHARACTERISTICS characteristics specified at TA = 25C Off Characteristics Parameter Symbol Collector-Emitter Breakdown Voltage V(BR)CEO Test Conditions IC = 10 mA Min Typ Max Units Volts 60 Collector-Base Cutoff Current ICBO1 VCB = 60 Volts 10 A Collector-Base Cutoff Current ICBO2 VCB = 50 Volts 10 nA Collector-Base Cutoff Current ICBO3 VCB = 50 Volts, TA = 150OC 10 A Collector-Emitter Cutoff Current ICES VCE = 50 Volts 50 nA Emitter-Base Cutoff Current IEBO1 VEB = 5 Volts 10 A Emitter-Base Cutoff Current IEBO2 VEB = 4 Volts 50 nA On Characteristics Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0% Parameter Symbol hFE1 hFE2 hFE3 hFE4 hFE5 hFE6 DC Current Gain Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage VBEsat1 VBEsat2 VCEsat1 VCEsat2 Test Conditions IC = 0.1 mA, VCE = 10 Volts IC = 1.0 mA, VCE = 10 Volts IC = 10 mA, VCE = 10 Volts IC = 150 mA, VCE = 10 Volts IC = 500 mA, VCE = 10 Volts IC = 10 mA, VCE = 10 Volts TA = -55OC IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA IC = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA Min 75 100 100 100 50 50 Test Conditions VCE = 20 Volts, IC = 20 mA, f = 100 MHz VCE = 10 Volts, IC = 1 mA, f = 1 kHz VCB = 10 Volts, IE = 0 mA, 100 kHZ < f < 1 MHz VEB = 0.5 Volts, IC = 0 mA, 100 kHZ < f < 1 MHz Min Typ Max Units 450 300 0.6 1.3 2.6 0.4 1.6 Volts Max Units 8 pF 30 pF 45 300 ns Volts Dynamic Characteristics Parameter Magnitude - Common Emitter, Short Circuit Forward Current Transfer Ratio Small Signal Short Circuit Forward Current Transfer Ratio Symbol |hFE| hFE Open Circuit Output Capacitance COBO Open Circuit Input Capacitance CIBO Typ 2.0 100 Switching Characteristics Saturated Turn-On Time Saturated Turn-Off Time Copyright 2010 Rev. J ton toff ns SEMICOA Corporation 333 McCormick Avenue, Costa Mesa, California 92626 714.979.1900, FAX 714.557.4541 www.SEMICOA.com Page 2 of 2