1
CSM_E3Z_DS_E_14_1
Compact Photoelectric Sensor with Built-in Amplifier
E3Z
The Standard for Photoelectric Sensors
with a Secure Track Record of One
Million Sold Yearly.
• Long sensing distance of 30 m for Through-beam Models, 4 m for
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
• Mechanical axis and optical axis offset of less than ±2.5° simplifies
optical axis adjustment.
• High stability with unique algorithm that prevents interference of
external light.
Be sure to read Safety Precautions on
page 15.
Features
Industry's Top-level Sensing Distance with
Built-in Amplifier
A separately sold filter is available to prevent mutual interference for
Through-beam Models with red lights sources and a sensing
distance of 10 m. Reflective Models include functionality to prevent
mutual interference.
Long-distance, Through-beam Sensors with a detection distance of
30 m (response time: 2 ms) are also available.
Low-temperature Operation for Applications in Cold-storage Warehouses
A wider ambient operating range from −40 to 55°C (main models with connectors). We also provide Sensor I/O Connectors with PUR Cables for
high resistance to cold environments.
Improved Matching of Optical Axis and Mechanical Axis for
Through-beam Models and Retro-reflective Models
The offset between the optical axis and the mechanical axis is kept within ±2.5°, so the optical axis can
be accurately set simply by mounting the Sensor according to the mechanical axis.
Sensor Protection against Incorrect Wiring
The Sensor includes output reverse polarity protection.
(A diode to protect against reverse polarity is added to the output line.)
Complete Compliance with the EU's RoHS Directive
Lead, mercury, cadmium hexachrome, polybrominated biphenyl (PBB), and polybrominated
diphenyl ether (PBDE) have all been eliminated. Also, burnable polyethylene packaging has
been used.
Through-beam
Retro-reflective with MSR function
30 m
Diffuse-reflective
1 m
4 m
Distance-settable
20 cm
30 m
Optical axis
2.5° max.
mechanical
axis
The receiver will always be in the range of light diffusion.
Through-beam Model receivers and Reflective Models (except the E3Z-LS)
Protection for NPN output models
4
3
112 to 24 VDC
Brown
Black
Blue
100 mA
max.
Operation
indicator
(orange)
Stability
indicator
(green)
0 V
ZD
Load
(relay)
Photo-
electric
Sensor
main
circuit
eco
Pb
2
E3Z
Ordering Information
Sensors [Refer to Dimensions on page 16.]
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. The sensing distance specified is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
*4. Models with emission stop function. Refer to page 8, Photoelectric Sensors Technical Guide for details.
Sensing method Appearance Connection method Sensing distance Model
NPN output PNP output
Through-beam
(Emitter + Receiver)
*3
Pre-wired (2 m)
E3Z-T61 2M E3Z-T81 2M
Emitter
E3Z-T61-L 2M
Receiver
E3Z-T61-D 2M
Emitter
E3Z-T81-L 2M
Receiver
E3Z-T81-D 2M
Standard M8 connector
E3Z-T66 E3Z-T86
Emitter
E3Z-T66-L
Receiver
E3Z-T66-D
Emitter
E3Z-T86-L
Receiver
E3Z-T86-D
Pre-wired (2 m)
E3Z-T61A 2M E3Z-T81A 2M
Emitter
E3Z-T61-A-L 2M
Receiver
E3Z-T61-A-D 2M
Emitter
E3Z-T81-A-L 2M
Receiver
E3Z-T81-A-D 2M
Standard M8 connector
E3Z-T66A E3Z-T86A
Emitter
E3Z-T66-A-L
Receiver
E3Z-T66-A-D
Emitter
E3Z-T86-A-L
Receiver
E3Z-T86-A-D
Pre-wired (2 m)
E3Z-T62 2M E3Z-T82 2M
Emitter
E3Z-T62-L 2M
Receiver
E3Z-T62-D 2M
Emitter
E3Z-T82-L 2M
Receiver
E3Z-T82-D 2M
Standard M8 connector
E3Z-T67 E3Z-T87
Emitter
E3Z-T67-L
Receiver
E3Z-T67-D
Emitter
E3Z-T87-L
Receiver
E3Z-T87-D
Emission stop
function
Pre-wired (2 m)
E3Z-T62-G0 2M *4E3Z-T82-G0 2M *4
Emitter
E3Z-T62-G0-L 2M
Receiver
E3Z-T62-G0-D 2M
Emitter
E3Z-T82-G0-L 2M
Receiver
E3Z-T82-G0-D 2M
Standard M8 connector
E3Z-T67-G0 *4E3Z-T87-G0 *4
Emitter
E3Z-T67-G0-L
Receiver
E3Z-T67-G0-D
Emitter
E3Z-T87-G0-L
Receiver
E3Z-T87-G0-D
Retro-reflective with
MSR function *1
Pre-wired (2 m) E3Z-R61 2M E3Z-R81 2M
Standard M8 connector
E3Z-R66 E3Z-R86
Diffuse-reflective
Pre-wired (2 m) E3Z-D61 2M E3Z-D81 2M
Standard M8 connector
E3Z-D66 E3Z-D86
Pre-wired (2 m) E3Z-D62 2M E3Z-D82 2M
Standard M8 connector
E3Z-D67 E3Z-D87
Pre-wired (2 m) E3Z-L61 2M E3Z-L81 2M
Standard M8 connector
E3Z-L66 E3Z-L86
Distance-settable
Refer to E3Z-LS.
Pre-wired (2 m) E3Z-LS61 2M E3Z-LS81 2M
Standard M8 Connector
E3Z-LS66 E3Z-LS86
Pre-wired (2 m) E3Z-LS63 2M E3Z-LS83 2M
Standard M8 connector
E3Z-LS68 E3Z-LS88
Slit-type Through-
beam
Refer to E3Z-G.
1 axis Pre-wired (2 m) E3Z-G61 2M E3Z-G81 2M
2 axes E3Z-G62 2M E3Z-G82 2M
1 axis
Pre-wired M8 connector
E3Z-G61-M3J E3Z-G81-M3J
2 axes E3Z-G62-M3J E3Z-G82-M3J
Limited-reflective for
transparent glasses
Pre-wired (2 m) E3Z-L63 2M E3Z-L83 2M
Standard M8 connector
E3Z-L68 E3Z-J88
Retro-reflective with-
out MSR function for
clear, plastic bottles
Pre-wired (2 m) *2E3Z-B61 2M E3Z-B81 2M
Standard M8 connector
E3Z-B66 E3Z-B86
Pre-wired (2 m) *2E3Z-B62 2M E3Z-B82 2M
Standard M8 connector
E3Z-B67 E3Z-B87
Red light Infrared light
15 m
10 m
30m
4 m
(100 mm)
*2
5 to 100 mm
(wide view)
1 m
90±30 mm
(narrow beam)
20 to 40 mm (BGS min setting)
20 to 200 mm (BGS max setting)
40 min. Incident threshold (FGS min setting)
200 min. Incident threshold (FGS max setting)
2 to 20 mm (BGS min setting)
2 to 80 mm (BGS max setting)
25 mm
30±20 mm
*1
500 mm (80 mm)
2 m (500 mm)
3
E3Z
Variety of Connection Specifications
The models with the connection specifications marked with a black circle in the table are available.
The model number indication is a combination of the basic model and the connection specification.
NPN Output
Clamp-type e-CON pre-wired connectors are also available for models shaded in .
Add "-ECON-C 2M" after the basic model number to specify the connectors.
Example: E3Z-T61-M1TJ 0.3M
Basic model
number
Connection
specification
Model
Model
number
example
E3Z-T61
-M1TJ 0.3M E3Z-T61 0.5M E3Z-T61 5M E3Z-T61
-M1J 0.3M
E3Z-T61
-M3J 0.3M
E3Z-T61
-ECON 0.3M
E3Z-T61
-ECON 0.5M
E3Z-T61
-ECON 2M
Sensing
method
Sens-
ing dis-
tance
Main
features
Connec-
tion
specifi-
cation
M12 pre-
wired Smart-
click connec-
tor (cable
length: 0.3 m)
Pre-wired
(cable length:
0.5 m)
Pre-wired
(cable length:
5m)
M12 pre-
wired stan-
dard connec-
tor (cable
length: 0.3 m)
M8, 4-pin pre-
wired con-
nector (cable
length: 0.3 m)
e-CON pre-
wired con-
nector (cable
length: 0.3 m/
0.5 m)
e-CON pre-
wired con-
nector (cable
length: 2 m)
Basic
model
number
-M1TJ 0.3M 0.5M 5M -M1J 0.3M -M3J 0.3M -ECON 0.3M
-ECON 0.5M -ECON 2M
Through-
beam
15 m Infrared
light E3Z-T61 ●●●●●●●
10 m Red
light E3Z-T61A --- ●●●--- ●●
30 m 2-ms re-
sponse E3Z-T62 --- ●--- --- --- --- ---
Retro-
reflective 4 m MSR
function E3Z-R61 ●●●●●●●
Diffuse-
reflective
(narrow-
beam re-
flective)
100 mm Wide
view E3Z-D61 --- ●●●●●●
1 m
Long
dis-
tance
E3Z-D62 ●●●●●●●
90 mm Narrow
beam E3Z-L61 ●●●●--- ●●
Distance-
settable
200 mm FGS
function E3Z-LS61 --- ●●●●●●
80 mm Small
spot E3Z-LS63 --- ●--- --- --- --- ---
Slit-type 25 mm
1 optical
axis E3Z-G61 ●●●●●●●
2 optical
axes E3Z-G62 --- ●●●●●●
Retro-
reflective
for clear,
plastic
bottles
500 mm
No MSR
function
E3Z-B61 --- ●●--- --- ●●
2 m E3Z-B62 --- ●●●--- ●●
4
E3Z
PNP Output
Model
Model
number
example
E3Z-T81
-M1TJ 0.3M E3Z-T81 0.5M E3Z-T81 5M E3Z-T81
-M1J 0.3M
E3Z-T81
-M3J 0.3M
Sensing
method
Sens-
ing dis-
tance
Main
features
Connec-
tion
specifi-
cation
M12 pre-wired
Smartclick
connector
(cable length:
0.3 m)
Pre-wired
(cable length:
0.5 m)
Pre-wired
(cable length:
5m)
M12 pre-wired
standard con-
nector (cable
length: 0.3 m)
M8, 4-pin pre-
wired connec-
tor (cable
length: 0.3 m)
Basic
model
number
-M1TJ 0.3M 0.5M 5M -M1J 0.3M -M3J 0.3M
Through-
beam
15 m Infrared
light E3Z-T81 ●●●●●
10 m Red
light E3Z-T81A --- --- --- ●---
30 m 2-ms re-
sponse E3Z-T82 --- ●--- --- ---
Retro-
reflective 4 m MSR
function E3Z-R81 ●●●●●
Diffuse-
reflective
(narrow-
beam
reflective)
100 mm Wide
view E3Z-D81 ●●●●●
1 m
Long
dis-
tance
E3Z-D82 ●●●●●
90 mm Narrow
beam E3Z-L81 ●●●●---
Distance-
settable
200 mm FGS
function E3Z-LS81 --- ●●●●
80 mm Small
spot E3Z-LS83 --- ●--- --- ---
Slit-type 25 mm
1 optical
axis E3Z-G81 ●●--- ●●
2 optical
axes E3Z-G82 --- ●--- ●●
Retro-
reflective
for clear,
plastic
bottles
500 mm
No MSR
function
E3Z-B81 --- ●--- ●---
2 m E3Z-B82 --- ●●●---
5
E3Z
Oil-resistive Sensors [Refer to Dimensions on page 16.]
*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. The sensing distance specified is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*3. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
Accessories (Order Separately)
Slit (A Slit is not provided with Through-beam Sensors) Order a Slit separately if required. [Refer to Dimensions on page 18.]
Reflectors
(Reflector required for Retroreflective Sensors) A Reflector is not provided with the Sensor. Be sure to order a Reflector separately.
[Refer to Dimensions on E39-L/F39-L/E39-S/E39-R]
Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other than E39-R1 or E39-R1S.
*1. Refer to Reflectors on E39-L/F39-L/E39-S/E39-R for details.
*2. Values in parentheses indicates the minimum required distance between the Sensor and Reflector.
Mutual Interference Protection Filter
A Filter is not provided with the Sensor (for the through-beam E3Z-T
@@
A). Order a Filter separately if required.
Sensing method Appearance Connection meth-
od Sensing distance Model
NPN output PNP output
Through-beam
(Emitter + Receiver) *3
Pre-wired (2 m)
E3Z-T61K 2M E3Z-T81K 2M
Emitter
E3Z-T61K-L 2M
Receiver
E3Z-T61K-D 2M
Emitter
E3Z-T81K-L 2M
Receiver
E3Z-T81K-D 2M
Pre-wired M8 connector
E3Z-T61K-M3J 0.3M E3Z-T81K-M3J 0.3M
Emitter
E3Z-T61K-L-M3J 2M
Receiver
E3Z-T61K-D-M3J 2M
Emitter
E3Z-T81K-L-M3J 2M
Receiver
E3Z-T81K-D-M3J 2M
Retro-reflective with
MSR function *1
Pre-wired (2 m)
*2E3Z-R61K 2M E3Z-R81K 2M
Pre-wired M8 connector
E3Z-R61K-M3J 0.3M E3Z-R81K-M3J 0.3M
Diffuse-reflective
Pre-wired (2 m)
E3Z-D61K 2M E3Z-D81K 2M
Pre-wired M8 connector
E3Z-D61K-M3J 0.3M E3Z-D81K-M3J 0.3M
Pre-wired (2 m)
E3Z-D62K 2M E3Z-D82K 2M
Pre-wired M8 connector
E3Z-D62K-M3J 0.3M E3Z-D82K-M3J 0.3M
Slit width Sensing distance Minimum detectable object
(typical) Model Contents
E3Z-T@@ E3Z-T@@A
0.5-mm dia. 50 mm 35 mm 0.2-mm dia. E39-S65A
One set
(contains Slits for
both the Emitter and
Receiver)
1-mm dia. 200 mm 150 mm 0.4-mm dia. E39-S65B
2-mm dia. 800 mm 550 mm 0.7-mm dia. E39-S65C
0.5 × 10 mm 1 m 700 mm 0.2-mm dia. E39-S65D
1 × 10 mm 2.2 m 1.5 m 0.5-mm dia. E39-S65E
2 × 10 mm 5 m 3.5 m 0.8-mm dia. E39-S65F
Red light Infrared light
15 m
3 m (150 mm)
5 to 100 mm (wide view)
1 m
Name Sensing distance (typical)*Model
Quantity
Remarks
E3Z-R E3Z-R@KE3Z-B@1/-B@6E3Z-B@2/-B@7
Reflector
3 m (100 mm)
(rated value)
2 m (100 mm)
(rated value) --- --- E39-R1 1
•Retro-reflective
models are not
provided with
Reflectors.
•The MSR function
is enabled.
4 m (100 mm)
(rated value)
3 m (150 mm)
(rated value)
500 mm (80 mm)
(rated value)
2 m (500 mm)
(rated value)
E39-R1S
1
5 m (100 mm) --- --- --- E39-R2 1
2.5 m (100 mm) --- --- --- E39-R9 1
3.5 m (100 mm) --- --- --- E39-R10 1
Fog Preventive
Coating 3 m (100 mm) --- 500 mm (80 mm)
(rated value)
2 m (500 mm)
(rated value)
E39-R1K
1
Small Reflector 1.5 m (50 mm) --- --- --- E39-R3 1
Tape Reflector
700 mm (150 mm) --- --- ---
E39-RS1
1
1.1 m (150 mm) --- --- ---
E39-RS2
1
1.4 m (150 mm) --- --- ---
E39-RS3
1
Sensing distance Appearance/Dimensions Model Quantity Remarks
3 m E39-E11
Two sets each for the
Emitter and Receiver
(total of four pieces)
Can be used with the E3Z-T@@A Through-
beam models. The arrow indicates the direc-
tion of polarized light. Mutual interference
can be prevented by altering the direction of
polarized light from or to adjacent Emitters
and Receivers.
0.2
1
4.9
10.8
7.4
11.231.4
6
E3Z
Mounting Brackets A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required.
[Refer to Dimensions on E39-L/F39-L/E39-S/E39-R]
Note: 1. When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
2. Refer to Mounting Brackets on E39-L/F39-L/E39-S/E39-R for details.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired Connector models.
*2. Cannot be used for Standard Connector models.
Sensor I/O Connectors
(Models for Connectors and Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
[Refer to Dimensions for XS3, XS2, XS5. For e-CON, inquire.]
Note: When using Through-beam models, order one connector for the Receiver and one for the Emitter.
*1. Refer to Introduction to Sensor I/O Connectors for details.
*2. The Sensor can be used in low-temperature environments (−25°C to −40°C). Do not use the Sensor in locations that are subject to oil.
*3. The connector will not rotate after connecting.
*4. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
Appearance Model (material) Quantity Remarks Appearance Model (material) Quantity Remarks
E39-L153
(SUS304) *11
Mounting Brackets
E39-L98
(SUS304) *21Metal Protective Cover
Bracket
E39-L104
(SUS304) *11E39-L150
(SUS304) 1
(Sensor adjuster)
Easily mounted to the
aluminum frame rails of
conveyors and easily
adjusted.
For left to right adjust-
ment
E39-L43
(SUS304) *21Horizontal Mounting
Brackets
E39-L151
(SUS304) 1
E39-L142
(SUS304) *21Horizontal Protective
Cover Bracket
E39-L44
(SUS304) 1 Rear Mounting Bracket E39-L144
(SUS304) *21
Compact Protective
Cover Bracket (For E3Z
only)
Size Cable Appearance Cable type Model
M8 *1
Standard
2 m
4-wire
XS3F-M421-402-A
5 m XS3F-M421-405-A
2 m XS3F-M422-402-A
5 m XS3F-M422-405-A
M12 *1
(For -M1J models)
2 m
3-wire
XS2F-D421-DC0-A
5 m XS2F-D421-GC0-A
2 m XS2F-D422-DC0-A
5 m XS2F-D422-GC0-A
M12
(For -M1TJ models)
2 m 4-wire XS5F-D421-D80-A
5 m XS5F-D421-G80-A
e-CON
2 m
4-wire
E39-ECON2M
5 m E39-ECON5M
0.5 to 1 m E39-ECONW@M
@ indicates cable length (in units
of m). Specify with 0.1-increments.
1.1 to 1.5 m
1.6 to 2 m
M8
PUR
(Polyure-
thane) cable *2
2 m
4-wire
XS3F-M421-402-L
5 m XS3F-M421-405-L
2 m XS3F-M422-402-L
5 m XS3F-M422-405-L
Straight *3
L-shaped *3 *4
Straight *3
L-shaped *3
Straight
1234
Single-end connector
1234
4
3
12
Double-end connectors
Straight *3
L-shaped *3 *4
7
E3Z
Ratings and Specifications
*1. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.
*2. Plastic bottles must pass with the minimum clearance of 500 mm.
Sensing method Through-beam Retro-reflective with
MSR function Diffuse-reflective (Narrow-
beam Models)
Model
NPN
out-
put
Pre-wired E3Z-T61 E3Z-T62 E3Z-T61A E3Z-R61 E3Z-D61 E3Z-D62 E3Z-L61
Connector (M8) E3Z-T66 E3Z-T67 E3Z-T66A E3Z-R66 E3Z-D66 E3Z-D67 E3Z-L66
PNP
out-
put
Pre-wired E3Z-T81 E3Z-T82 E3Z-T81A E3Z-R81 E3Z-D81 E3Z-D82 E3Z-L81
Item Connector (M8) E3Z-T86 E3Z-T87 E3Z-T86A E3Z-R86 E3Z-D86 E3Z-D87 E3Z-L86
Sensing distance 15 m 30 m 10 m
4 m (100 mm) *1
(when using E39-R1S)
3 m (100 mm) *1
(when using E39-R1)
100 mm
(white paper:
100 × 100 mm)
1 m
(white paper:
300 × 300 mm)
90 + 30 mm
(white paper,
100 x 100 mm)
Spot diameter (typical) ---
(2.5 dia. and
sensing dis-
tance of
90 mm)
Standard sensing object Opaque: 12-mm dia. min.
Opaque: 75-mm dia. min.
---
Minimum detectable object (typical) --- 0.1 mm (cop-
per wire)
Differential travel --- 20% max. of setting distance
Refer to Engi-
neering data
on page 10.
Directional angle Both emitter and receiver: 3 to 15°2 to 10°---
Light source (wavelength) Infrared LED (870 nm) Red LED
(660 nm) Red LED (660 nm) Infrared LED (860 nm) Red LED
(650 nm)
Current consumption 35 mA max. (Emitter: 15 mA max., Receiv-
er: 20 mA max.) 30 mA max.
Protection circuits
Reversed power supply polarity protection,
Output short-circuit protection, and Re-
versed output polarity protection
Reversed power supply polarity protection, Output short-circuit protection,
Mutual interference prevention, and Reversed output polarity protection
Response time
Operate or
reset:
1 ms max.
Operate or
reset:
2 ms max.
Operate or reset: 1 ms max.
Degree of protection IEC, IP67
Connection method Pre-wired cable (standard length: 2 m and 0.5 m), Connector (M8)
Weight
(packedstate)
Pre-wired cable (2 m) Approx. 120 g Approx. 65 g
Connector Approx. 30 g Approx. 20 g
Material Case PBT (polybutylene terephthalate)
Lens Modified polyarylate Methacrylic resin Modified polyarylate
Sensing method Retro-reflective for clear, plastic bottles (without MSR function)
Model NPN output E3Z-B61 E3Z-B66 E3Z-B62 E3Z-B67
Item PNP output E3Z-B81 E3Z-B86 E3Z-B82 E3Z-B87
Sensing distance 500 mm (80 mm) *1 (using E39-R1S) 2 m (500 mm) *1 *2 (using E39-R1S)
Standard sensing object 500-ml (65-mm dia.) transparent round plastic bottles
Light source (wavelength) Red LED (660 nm)
Current consumption 30 mA max.
Protection circuits Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention,
and Reversed output polarity protection
Response time Operate or reset: 1 ms max.
Degree of protection IEC, IP67
Connection method
Pre-wired cable (standard
length: 2 m and 0.5 m)
Connector (M8, 4 pins)
Pre-wired cable (standard
length: 2 m and 0.5 m)
Connector (M8, 4 pins)
Weight
(packed
state)
Pre-wired cable (2 m) Approx. 65 g
Standard Connector Approx. 20 g
Material
Case PBT (polybutylene terephthalate)
Lens Modified polyarylate
8
E3Z
The E3Z-T@2-G0 is equipped with an emission stop function. Ratings and specifications of this function are given in the following table.
Visible spot models are available for through-beam NPN output models. The different items from E3Z-T62 are listed below.
Item Sensing method
Output and Modes Through-beam models, NPN output: E3Z-T62/T67-G0, PNP output: E3Z-T82/T87-G0
Emission stop
function
Input
<NPN models> Emission OFF: Short-circuit to 0 V or 1.5 V max. (Outflow current 1 mA max.), Emission ON: Discon-
nected (Leakage current 0.1 mA max.)
<PNP models> Emission OFF: Short-circuit to +DC (Power supply plus side) or +DC-1.5 V max. (Inlet current 3 mA
max.), Emission ON: Disconnected (Leakage current 0.1 mA max.)
Response time Operate or reset: 0.5 ms max.
Model E3Z-T62-SOSDW-P2
Light source (wavelength) Orange LED (615 nm)
Response time Operate or reset: 1 ms max.
Connection method Pre-wired lable (Standard length: 2 m)
Sensing method Transparent glass Limited-reflective (for transparent object detection )
Model NPN output E3Z-L63 E3Z-L68
Item PNP output E3Z-L83 E3Z-L88
Sensing distance 30±20 mm (transparent glasses 100 × 100 mm)
Spot diameter 2-mm dia. min. (at sensing distance of 30 mm)
Minimum detectable object (typical) 0.1 mm dia. (copper wire)
Light source (wavelength) Red LED (660 nm)
Current consumption 30 mA max.
Protection circuits Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention,
Reverse output polarity protection
Response time Operate or reset: 1 ms max.
Degree of protection IEC, IP67
Connection method Pre-wired (standard length: 2 m) M8 connector
Weight
(packed state)
Pre-wired cable (2 m) Approx. 65 g
Standard Connector Approx. 20 g
Material Case PBT (polybutylene terephthalate)
Lens Modified polyarylate
9
E3Z
Oil-resistant
*Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Common
* The ambient temperature range during operation for connector models depends on the model. For the E3Z-T66/T86/R66/R86, the range is −40°C to 55°C. For the
E3Z-D66/D86/D67/D87, the range is −30°C to 55°C. For other connector models, the range is −25°C to −55°C.
The sensing distance for Retro-reflective Models (E3Z-R66/R86) between −40°C to −25°C, however, will be as follows (not the values in the table):
With E39-R1S: 3 m (100 mm), With E39-R1: 2 m (100 mm).
Also, use the XS3F-M42@-4@@-L Sensor I/O Connector (PUR cable) for applications between −25°C to −40°C. (Refer to page 6.)
Sensing method Through-beam Retro-reflective Diffuse-reflective
Model
NPN
out-
put
Pre-wired Models E3Z-T61K E3Z-R61K E3Z-D61K E3Z-D62K
M8 Pre-wired connector E3Z-T61K-M3J E3Z-R61K-M3J E3Z-D61K-M3J E3Z-D62K-M3J
PNP
out-
put
Pre-wired Models E3Z-T81K E3Z-R81K E3Z-D81K E3Z-D82K
Item M8 Pre-wired connector E3Z-T81K-M3J E3Z-R81K-M3J E3Z-D81K-M3J E3Z-D82K-M3J
Sensing distance 15 m
3 m (150 mm) *
(when using E39-R1S)
2 m (100 mm) *
(when using E39-R1)
100 mm
(white paper: 100 ×
100 mm)
1 m
(white paper: 300 ×
300 mm)
Standard sensing object Opaque: 12-mm dia. min. Opaque: 75-mm dia. min. ---
Differential travel --- 20% max. of setting distance
Directional angle Both emitter and receiver:
3 to 15°2 to 10°---
Light source (wavelength) Infrared LED (870 nm) Red LED (660 nm) Infrared LED (860 nm)
Current consumption
35 mA max. (Emitter:
15 mA max., Receiver:
20 mA max.)
30 mA max.
Protection circuits
Reversed power supply
polarity protection, Output
short-circuit protection,
and Reversed output po-
larity protection
Reversed power supply polarity protection, Output short-circuit protection, Mutual in-
terference prevention, and Reversed output polarity protection
Response time Operate or reset: 1 ms max.
Degree of protection IP67 (IEC), Oil resistant models: IP67 (IEC) (in-house standards: oilproof), excluding cables and connectors
Connection method Pre-wired cable (standard length: 2 m), M8 Pre-wired Connector
Weight
(packed
state)
Pre-wired cable (2 m) Approx. 120 g Approx. 65 g
Connector (M8, 4 pins) Approx. 50 g Approx. 30 g
Material Case PBT (polybutylene terephthalate)
Lens Modified polyarylate Methacrylic resin Modified polyarylate
Power supply voltage 12 to 24 VDC±10%, ripple (p-p): 10% max.
Control output
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max.
Residual voltage: Load current of less than 10 mA: 1 V max.
Load current of 10 to 100 mA: 2 V max.
Open collector output (NPN/PNP depending on model)
Light-ON/Dark-ON selectable
Sensitivity adjustment One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25 to 55°C, Some connector models: −40°C to 55°C * (with no icing or condensation)
Storage: −40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Indicator
Operation indicator (orange)
Stability indicator (green)
Through-beam Emitter has power indicator (orange) only.
Accessories Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any of the above models.)
10
E3Z
Engineering Data (Typical)
Parallel Operating Range
Through-beam Models Through-beam Models Through-beam Models
E3Z-T@1(T@6) E3Z-T@AE3Z-T@2(T@7)
Through-beam Models Through-beam Models Retro-reflective Models
E3Z-T@1(T@6) and Slit
(A Slit is mounted to the Emitter and
Receiver.)
E3Z-T@A and Slit
(A Slit is mounted to the Emitter and
Receiver.)
E3Z-R@1(R@6) and Reflector
E3Z-B@1/B@6 + E39-R1S Reflector
(Order Separately)
E3Z-B@2/B@7 + E39-R1S
Reflector (Order Separately)
1000
800
600
400
200
0
−200
−400
−600
−800
−
1000
40302010
Distance
X (m)
Y
X
Distance Y (mm)
1000
800
600
400
200
0
−200
−400
−600
−800
−
1000
40302010
Y
X
Distance
X (m)
Distance Y (mm)
2.0
1.5
1.0
0.5
0
−0.5
−1.0
−1.5
−2.0
40302010
Distance
X (m)
Distance Y (mm)
Y
X
250
200
150
100
50
0
−50
−100
−150
−200
−2
50
5 4 3 2 1
E39-S65B
E39-S65C
E39-S65D
E39-S65E
E39-S65F
Distance
X (m)
Distance Y
(
mm
)
200
150
100
50
0
−50
−200
−150
−100
5 4 3 2 1
E39-S65B
E39-S65C
E39-S65D
E39-S65E
E39-S65F
Distance
X (m)
Distance Y (mm)
Y
X
Y
X
200
150
100
50
0
−50
−100
−150
−200
8642
E39-R9
E39-R1S
E39-R1
E39-R10
E39-R2
E39-R1K
E39-R3
Distance Y (mm)
Distance X (m)
30.5 1 1.5 2 2.5
Y
X
−50
−40
−30
−20
−10
0
10
20
30
40
50
Distance Y (mm)
Reflector: E39-R1S
500-mm type
Distance X (m)
−100
−80
−60
−40
−20
0
20
40
60
80
100
Distance Y (mm)
4.50.5 1 1.5 2 2.5 3 3.5 4
Reflector: E39-R1S
Distance X (m)
2-m type
Y
X
11
E3Z
Operating Range
Diffuse-reflective Models Diffuse-reflective Models Narrow-beam Reflective Models
E3Z-D@1(D@6) E3Z-D@2(D@7) E3Z-L@1(L@6)
Excess Gain vs. Set Distance
Through-beam Models Retro-reflective Models Diffuse-reflective Models
E3Z-T@1(T@6)/-T@A/-T@2(T@7) E3Z-R@1(R@6) and Reflector E3Z-D@1(D@6)
Diffuse-reflective Models Narrow-beam Reflective Models Limited reflective Models
E3Z-D@2(D@7) E3Z-L@1(L@6) E3Z-L@3(L@8)
30
20
10
0
−10
−20
−30
250150 20010050
Y
X
Sensing object: 100 × 100 mm
white paper
Distance Y (mm)
Distance
X (m)
80
60
40
20
0
−20
−40
−60
−80
1.61.0 1.2
0.6 1.40.80.2 0.4
Y
X
Sensing object: 300 × 300 mm white paper
Distance Y (mm)
Distance
X (m)
Y
X
10
8
6
4
2
0
−2
−4
−6
−8
−10
Sensing object: 100 × 100 mm white paper
50
100 150
200 250
Distance Y (mm)
Distance
X (m)
100
10
1
0.1
0 10 20 30 40 50 70 60 80
E3Z-T@A
E3Z-T@2 (T@7)
E3Z-T@1 (T@6)
Excess gain ratio
Distance (m)
100
10
1
0.1
1068420
E39-R1S
E39-R1
E39-R10
E39-R2
E39-R1K
E39-R3
E39-R9
Excess gain ratio
Distance (m)
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.10 50 100 150 200 250 300 350
Excess gain ratio
Distance (m)
Operating
level
Sensing object: 100 × 100 mm white paper
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.10 0.5 1 1.5 2.523
Excess gain ratio
Distance (m)
Operating
level
Sensing object: 300 × 300 mm white paper 100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.10 50 100 150 200 250 300 350
Excess gain ratio
Distance (m)
Operating
level
SUS
White paper
Glass
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.1020 406080 100 120
Excess gain ratio
Distance (m)
Operating
level
12
E3Z
Excess Gain vs. Set Distance
E3Z-B@1/B@6 + E39-R1S
Reflector (Order Separately)
E3Z-B@2/B@7 + E39-R1S
Reflector (Order Separately)
Sensing Object Size vs. Sensing Distance
Diffuse-reflective Models Diffuse-reflective Models Narrow-beam Reflective Models
E3Z-D@1(D@6) E3Z-D@2(D@7) E3Z-L@1(L@6)
Spot Diameter vs. Sensing Distance Differential Travel vs. Sensing Distance
Narrow-beam Reflective Models Narrow-beam Reflective Models
E3Z-L@1(L@6) E3Z-L@1(L@6)
0.1
1
10
100
0.5 1 1.5 2 2.5 3
Excess gain ratio
500-mm type
Distance (m)
0.1
1
10
100
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
Excess gain ratio
Distance (m)
2-m type
d
d
350
300
250
200
150
100
50
350300250200150100500
Side length (one side) of
sensing object: d (mm)
Black paper
SUS
(glossy surface)
Distance (mm)
White paper d
d
4.5
4
3.5
3
2.5
2
1.5
1
0.5
350300250200150100500
Side length (one side) of
sensing object: d (mm)
Black paper
SUS
(glossy surface)
Distance (m)
White paper
d
d
300
250
200
150
100
50
100
10 20 307.5
12 3 5
0
Side length (one side) of
sensing object: d (mm)
Distance (m)
White paper
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
1601401208040 10060200
Distance (mm)
Spot diameter (mm)
30
25
20
15
10
5
15010075 125500
Distance (mm)
Differential travel (mm)
13
E3Z
I/O Circuit Diagrams
NPN Output
PNP Output
* Models numbers for Through-beam Sensors (E3Z-T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-T61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
Model*Operation
mode Timing charts Operation
selector Output circuit
E3Z-T61(K)
E3Z-T66
E3Z-T62
E3Z-T67
E3Z-T61A
E3Z-T66A
E3Z-R61(K)
E3Z-R66
E3Z-D61(K)
E3Z-D66
E3Z-D62(K)
E3Z-D67
E3Z-L61
E3Z-L66
E3Z-B61
E3Z-B66
E3Z-B62
E3Z-B67
E3Z-L63
E3Z-L68
Light-ON L side
(LIGHT ON)
Dark-ON D side
(DARK ON)
E3Z-T62-G0
E3Z-T67-G0 --- ---
Model*Operation
mode Timing charts Operation
selector Output circuit
E3Z-T81(K)
E3Z-T86
E3Z-T82
E3Z-T87
E3Z-T81A
E3Z-T86A
E3Z-R81(K)
E3Z-R86
E3Z-D81(K)
E3Z-D86
E3Z-D82(K)
E3Z-D87
E3Z-L81
E3Z-L86
E3Z-B81
E3Z-B86
E3Z-B82
E3Z-B87
E3Z-L83
E3Z-L88
Light-ON L side
(LIGHT ON)
Dark-ON D side
(DARK ON)
E3Z-T82-G0
E3Z-T87-G0 --- ---
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between brown (1) and black (4) leads)
Output
transistor
Load
(e.g., relay)
1
2
3
4
Connector Pin Arrangement e-CON Connector Pin Arrangement
Pin 2 is not used.
Press fit Clamp
4
1
24
3
3
1
12 to 24 VDC
Br o w n
Bla c k
(Control
output)
Blue
100 mA
max.
Ope r ation
indicator
Stability
indicator
(Green)
(O r ange )
0 V
Z
D
Load
(Rel a y )
1
2
3
4
Photo -
elect r ic
Sensor
main
circuit
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models, Limited reflective Models.
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between brown (1) and black (4) leads)
Output
transistor
Load
(e.g., relay)
1
24
3
3
1
Power
indicator
(orange)
e-CON Connector
Pin Arrangement
1
2
3
4
Press fit Clamp type
1
2
3
4
Connector Pin
Arrangement
Pins 2 and 4
are not used.
12 to
24 VDC
Brown
Blue
Photo-
electric
Sensor
main
circuit
Through-beam Emitter
ON
OFF
ON
OFF
ON
OFF
Indicator
(orange)
(Between blue (3) and pink (2) leads)
Emission
stop input
LED for
emission
1
24
3
Connector Pin
Arrangement
Pin 4 is not used.
1
2
30 V
12 to 24 VDC
Brown
Pink
Blue
Power indicator
(Orange)
Photo-
electric
Sensor
main
circuit
(Emission
stop input)
Through-beam
Emitter
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between blue (3) and black (4) leads)
Output
transistor
Load
(e.g., relay)
4
1
24
3
1
3
0 V
Z
D
Connector Pin Arrangement
Pin 2 is not used.
12 to 24 VDC
Brown
Black
(Control
output) Blue
100 mA
max.
Operation
indicator Stability
indicator
(Green)
(Orange)
Load
(Relay)
Photo-
electric
Sensor
main
circuit
Through-beam Receivers, Retro-reflective Models,
Diffuse-reflective Models, Limited reflective Models.
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between blue (3) and black (4) leads)
Output
transistor
Load
(e.g., relay)
1
24
3
3
1
Power
indicator
(orange) Connector Pin Arrangement
Pins 2 and 4 are not used.
12 to 24 VDC
Brown
Blue
Photo-
electric
Sensor
Main
Circuit
Through-beam Emitter
ON
OFF
ON
OFF
ON
OFF
(Between brown (1) and pink (2) leads)
Indicator
(orange)
Emission
s
top input
LED for
e
mission
1
24
3
Connector Pin
Arrangement
Pin 4 is not used.
1
2
3
0 V
12 to 24 VDC
Brown
Pink
Blue
Power indicator
(Orange)
Photo-
electric
Sensor
main
circuit
(Emission
stop input)
Through-beam
Emitter
14
E3Z
Plugs (Sensor I/O Connectors)
Nomenclature
2
4
1
3
1
2
3
4
Brown
White
Blue
Black
Wire color
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Pin arrangement
Note: Pin 2 is not used.
Classifi-
cation
Wire
color
Connector
pin No. Application
DC
Brown 1 Power supply (+V)
White 2
(Emission stop input)
Blue 3 Power supply (0 V)
Black 4 Output
E39-ECON@M
E39-ECONW@M
e-CON connectorM8 connector
Through-beam Models
E3Z-T@@ (Emitter)
E3Z-T@@A (Receiver)
Retro-reflective Models
E3Z-R@@
E3Z-B@@
Diffuse-reflective Models
E3Z-D@@
Narrow-beam Reflective Models
E3Z-L@@
Limited reflective Models
E3Z-L@@
Stability indicator
(green)
Operation selector
Operation indicator
(orange)
Sensitivity adjuster
15
E3Z
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use the product in atmospheres or environments that exceed
product ratings.
● Wiring
M8 Metal Connector
•Be sure to connect or disconnect the metal connector after turning
OFF the Sensor.
•Hold the connector cover to connect or disconnect the metal
connector.
•Secure the connector cover by hand. Do not use any pliers,
otherwise the connector may be damaged.
•The proper tightening torque range is between 0.3 and 0.4 N·m. Be
sure to tighten the connector securely, otherwise the specified
degree of protection may not be maintained or the connector may
be disconnected due to vibration.
● Mounting
Sensor Mounting
Use M3 screws to mount the sensor and tighten each screw to a
maximum torque of 0.53 N·m.
● Oil-resistant Models
Oil Resistance
•Although the E3Z-@@@K Sensors have oil-resistant specifications,
performance may be affected by certain types of oil. Refer to the
following table.
•E3Z-@@@K Sensors are tested for resistance to the oils given in
the following table. Refer to the information in the table when
deciding which type of oil to use.
Note: 1. The E3Z maintained a minimum insulation resistance of 100 MΩ after
it was dipped in all the above oils for 240 hours.
2. When using the Sensors in environments subject to oils other than
those listed above, use the figures for kinematic viscosity and pH from
the table as general guidelines. Additives and other substances
contained in oils may affect the E3Z. Be sure to consider this before
use.
WARNING
Precautions for Correct Use
E3Z-@@@ E39-L104 Mounting Bracket
(sold separately)
Test oil clas-
sification Product name
Kinematic
viscosity
(mm2/s)
at 40°C
pH
Lubricant Velocity No.3 2.02
---
Water insolu-
ble machining
oil
Yushiron Oil No.2 ac Less than 10
Water soluble
machining oil
Yushiroken EC50T-3
---
7 to 9.5
Yushiron Lubic HWC68 7 to 9.9
Gryton 1700D 7 to 9.2
Yushironken S50N7 to 9.8
16
E3Z
Dimensions
Sensors
* Models numbers for Through-beam Sensors (E3Z-T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3Z-T61-L 2M), the model number of the Receiver, by adding "-D"
(example: E3Z-T61-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Through-beam*
Pre-wired Models
E3Z-T61(K)
E3Z-T81(K)
E3Z-T61A
E3Z-T81A
E3Z-T62(-G0)
E3Z-T82(-G0)
20
20
12
3
2.8
25.4
12.7
4 dia. vinyl-insulated round cable with 2 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter: 1.1 mm), Standard length: 2 m
Two, M3
Power indicator
(orange)
Emitter
Lens
11
2.1
31
31
10.8
10.8
7.2
Pins 2 and 4 are not used.
Terminal
No.
Specifi-
cations
1+V
2 ---
30V
4 ---
(Excluding -G0)
Pin 4 is not used.
Terminal
No.
Specifi-
cations
1+V
2 Input
30V
4 ---
(-G0)
6
15.8
18
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 2m
Press-fit e-CON Pre-wired Connector
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m,0.5m, and 2m
15
5.9
15.6
4
3
2
1
M12×1
1
3
2
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m 4
M8 Pre-wired Connector
(E3Z-T@@K-M3J)
4 dia. vinyl-insulated round cable with
2 or 3 conductors,
Standard length: 0.3 m
M8
24
13
4
3
2
1
Clamp-type e-CON Pre-wired Connector
(E3Z-T61-ECON-C)
M12 Pre-wired Connector
(E3Z-T@@-M1J)
* The Emitter cable has two conductors and the
Receiver cable has three conductors.
20
20
3
2.8
25.4
12.7
4 dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.2 mm2 (AWG24),
Insulator diameter:1.1 mm), Standard length: 2 m
Two, M3
4.5
11.2
Stability indicator (green)
Operation Indicator (orange) 7.5
Sensitivity adjuste
r
Operation selector
Receiver
Lens
11
2.1
31
31
10.8
10.8
7.2
Pin 2 is not used.
Terminal
No.
Specifi-
cations
1+V
2 ---
30V
4 Output
Through-beam*
Connector Models
E3Z-T66
E3Z-T86
E3Z-T66A
E3Z-T86A
E3Z-T67(-G0)
E3Z-T87(-G0)
M8 connector
10.4 Two, M3
Lens
11
Power indicator (orange)
9.75
Emitter
12
20
20
2.1
12.7
31
31
10.8
10.8
7.2
3
2.8
25.4
Pins 2 and 4 are not used.
Terminal
No.
Specifi-
cations
1+V
2 ---
30V
4 ---
(Excluding -G0)
Pin 4 is not used.
Terminal
No.
Specifi-
cations
1+V
2 Input
30V
4 ---
(-G0)
M8 connector
9.75
Lens
Stability indicator (green)
Operation Indicator (orange)
Sensitivity
adjuster
Operation
selector
Receiver
Two, M3
2.8
25.4
4.5
11.2
7.5
12.7
20
20
10.8
10.8
7.2
10.4
11
2.1
31
31
3
Pin 2 is not used.
Terminal
No.
Specifi-
cations
1+V
2---
30V
4 Output
17
E3Z
Retro-reflective Models
Pre-wired Models
E3Z-R61(K) E3Z-B61
E3Z-R81(K) E3Z-B81
E3Z-D61(K) E3Z-B62
E3Z-D81(K) E3Z-B82
E3Z-D62(K) E3Z-L63
E3Z-D82(K) E3Z-L83
E3Z-L61
E3Z-L81
2.8
25.4
4 dia. vinyl-insulated round cable with 3
conductors (Conductor cross section:
0.2 mm2 (AWG24), Insulator diameter:1.1 mm),
Standard length: 2 m
Stability indicator (green)
Two, M3
Sensitivity adjuster
Operation selector
Operation Indicator (orange)
2.1
31
31
Receiver
Lens 7 dia.
Emitter
Lens 7 dia.
20
20
16.7
10.8
10.8
3
2.8
4.5
11.2
7.5
25.4
8
Terminal
No.
Specifica-
tions
1+V
2---
30V
4 Output
Clamp-type e-CON pre-wired connectors
(E3Z-@6@-ECON-C)
M8 Pre-wired Connector (E3Z-T@@K-M3J)
4 dia. vinyl-insulated round cable
with 3 conductors,
Standard length: 0.3 m
M8
24
13
M12×1
1
3
2
4 dia. vinyl-insulated round cable
with 3 conductors,
Standard length: 0.3 m
M12 Pre-wired Connector
(E3Z-@@@-M1J)
4
Press-fit e-CON Pre-wired Connector
15
5.9
15.6
4 dia. vinyl-insulated round cable
with 3 or 4 conductors,
Standard length: 0.3 m, 0.5m, and 2m
6
15.8
18
4 dia. vinyl-insulated round cable
with 3 conductors,
Standard length: 2 m
4
3
2
1
4
3
2
1
Retro-reflective Models
Connector Models
E3Z-R66 E3Z-B66
E3Z-R86 E3Z-B86
E3Z-D66 E3Z-B67
E3Z-D86 E3Z-B87
E3Z-D67 E3Z-L68
E3Z-D87 E3Z-L88
E3Z-L66
E3Z-L86
Stability indicator (green)
Two, M3
9.75
Receiver
Lens 7 dia.
Emitter
Lens 7 dia.
Sensitivity adjuster
M8 connector
Operation selector
Operation Indicator (orange)
20
20
16.7
10.8
10.8
10.4
2.1
31
31
2.8
25.4
4.5
11.2
7.5
3
8
Terminal
No.
Specifica-
tions
1+V
2---
30V
4Output
Note: The lens for the E3Z-D@1/D@6/L@@/B@@ is red. The lens for the E3Z-D@2/D@7 is black.
18
E3Z
e-CON Connector Configurations
Accessories (Order Separately)
Mounting Brackets
Refer to E39-R for details.
Sensor I/O Connectors
Refer to XS2
@
and XS3
@
for details.
Wiring method Sensor connectors
Press-fit 37104-3122-000FL (made by Sumitomo 3M)
Clamp XN2A-1430 (made by OMRON)
Slits
E39-S65A
E39-S65B
E39-S65C
A
32.2
32.2
20.2
20.2
0.2-mm-thick
10.4
10.4
12.7
Model Size A Material
E39-S65A 0.5 dia. SUS301
stainless
steel
E39-S65B 1.0 dia.
E39-S65C 2.0 dia.
Slits
E39-S65D
E39-S65E
E39-S65F
Model Size A Material
E39-S65D 0.5 SUS301
stainless
steel
E39-S65E 1.0
E39-S65F 2.0
A
32.2
32.2
10
0.2-mm-thick
10.4
10.4
20.2
20.2
12.7
Slits
E39-L44
16.2
19.5
14.1
8.7
27
27
31.2
31.2
36
36
3
3
1.8
18
23.2
26.2
20°
(Mounting dimensions)
Slits
E39-L104
6.7
7.0
1
4.5
6
29
29
17.8
26.6
26.6
12.4
R20
14°
21.5
39
39
10°
8.8
(Mounting dimensions)
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2011.8
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2011 All Right Reserved.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
E3Z-B61 5M E3Z-B62 5M E3Z-D61 0.5M E3Z-D61 5M E3Z-D61K 2M E3Z-D61K-M3J 0.3M E3Z-D61-M1J 0.3M
E3Z-D62 0.5M E3Z-D62 5M E3Z-D62K 2M E3Z-D62K-M3J 0.3M E3Z-D62-M1J-1 0.3M E3Z-D62-M3J 0.3M E3Z-
D81 0.5M E3Z-D81K 2M E3Z-D81K-M3J 0.3M E3Z-D82 0.5M E3Z-D82 5M E3Z-D82K 2M E3Z-D82K-M3J 0.3M
E3Z-D82-M1J-1 0.3M E3Z-L61 0.5M E3Z-L61 5M E3Z-L61-M1J 0.3M E3Z-L81 0.5M E3Z-L81 5M E3Z-LS61 5M
E3Z-LS61K-M1J-EX 0.3M E3Z-LS61-M1J 0.3M E3Z-R61 0.5M E3Z-R61 5M E3Z-R61K 2M E3Z-R61-M3J 0.3M
E3Z-R61-M5J 0.3M E3Z-R81 0.5M E3Z-R81-C1 E3Z-R81K 2M E3Z-R81K-M3J 0.3M E3Z-R81-M1J 0.3M E3Z-T61
0.5M E3Z-T61K 2M E3Z-T61K-M3J 0.3M E3Z-T61-M1J 0.3M E3Z-T61-M1J-1 0.3M E3Z-T61-M3J 0.3M E3Z-T62
2M E3Z-T67 E3Z-T81 0.5M E3Z-T81K 2M E3Z-T81K-M3J 0.3M E3Z-T81-L 2M E3Z-T81-M1J E3Z-T81-M1J-1 0.3M
E3Z-T82 2M E3Z-T87 E3Z-B61-S0SBW-03 E3Z-D62-M1J 0.3M E3Z-G62-M1J 0.3M E3Z-G82-M1J 0.3M E3Z-L81-
M1J-1 0.3M E3Z-LL63 2M E3Z-LL81 2M E3Z-LL81-M1J 0.3M E3Z-LL83 2M E3Z-LR81-M1J 0.3M E3Z-LS81-M1J
0.3M E3Z-LS81-M3J 0.3M E3Z-LT61-L-M1J 0.3M E3Z-R61-M1J 0.3M E3Z-R61-M1J-1 0.3M E3Z-T61A-D 2M E3Z-
T61A-L 2M E3Z-T61A-M1J 0.3M E3Z-T81A-M1J 0.3M E3Z-T81C-G0SRD-CN E3Z-T81C-G0SRL-CN E3Z-T81-D-
M1J-1 0.3M E3Z-T81-L-M1J-1 0.3M E3Z-R81 5M
