High
Density
Rectangular
22 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries
connectpositronic.com
SMPL SERIES
MILITARY SPECIFICATIONS:
Conforms to MIL-DTL-28748.
INTERNATIONAL STANDARDS:
IEC 807-1
MATERIALS AND FINISHES:
Insulator: Glass filled DAP per ASTM-D-5948 type
SDG-F. Grey color is standard, black or
green available.
Fixed Contacts: Copper alloy, 0.000015 inch [0.38
microns] gold over nickel. Other finishes
available upon request.
Jackscrew System: Passivated stainless steel.
Polarizing Guides: Copper alloy with nickel plate or passi-
vated stainless steel.
Vibration Locks: Copper alloy with nickel plate.
MECHANICAL CHARACTERISTICS:
Fixed Contacts: Male – Size 22: 0.030 inch [0.76 mm]
diameter.
Female – “Closed entry” design for
highest reliability.
Contact Retention in
Insulator: 6 lbs. [26.5N] minimum.
Contact Termination: 0.025 inch [0.64 mm] diameter.
Locking Systems: Friction, vibration locks and jackscrews.
Polarization: Polarized guides, polarized shells and
jackscrew system.
Mechanical Operations: 1000 operations per IEC 512-5.
Jackscrews: Standard threads, 2-56 UNC. M2X0.4
metric threads available.
ELECTRICAL CHARACTERISTICS:
Contact Current Rating
[maximum]: 5 amps.
Initial Contact Resistance: 0.012 ohms
Flash over Voltage: 2200 V.AC [rms]
Test Voltage: 1000 V.AC [rms]
Insulation Resistance
[minimum]: 5 G ohms
Clearance and Creepage
Distance [minimum]: 0.028 inch [0.71 mm]
Working Temperature: -55°C to 135°C
Working Voltage: 250 V.AC [rms]
HIGH DENSITY RECTANGULAR
RIGHT ANGLE
PRINTED BOARD MOUNT CONNECTORS
SMPL Series connectors are high reliability, high density, rec-
tangular connectors meeting the performance requirements of
MIL-DTL-28748. Termination style is right angle printed board
mount. SMPL Series connectors are intermateable with
Positronic SGM and SGMC series connectors.
Twelve connector variants, four through 50 poles, are offered.
Contact spacing is 0.094 inch [2.39mm] between centers, and
contact diameters are 0.030 inch [0.76mm], rated to five
amperes per contact.
A complete array of mounting, locking and polarizing acces-
sories is available for the SMPL Series. For details, see the
High Density Rectangular Connector Accessories section.
Ideal applications for the SMPL Series are where low weight
and high density are requirements. The high reliability of the
“closed entry” female contacts insures numerous couplings of
the connector without substantial degradation of contact resis-
tance. SMPL Series connectors are used in the aerospace,
avionics, telecommunications, instrumentation, medical and
robotics industries.
SMPL SERIES TECHNICAL CHARACTERISTICS
Size 22 Contacts
Conforms to
MIL-DTL-28748
IEC Publication 807-1
Telecommunication
U.L. File #E140980
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
For RoHS options
see page 25.
High
Density
Rectangular
23
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries
connectpositronic.com
SMPL SERIES
0.030 [0.76] Ø TYP.
0.156 [3.96]
Ø TYP.
0.285
[7.24]
0.175
[4.45]
0.020
[0.51]
0.140 [3.56]
ALIGNMENT BAR
MOUNTING HOLE
HAS 2-56 THREADS
STANDARD POSITION OF INSULATOR
REQUIRES CONTACT “A” TO BE
ADJACENT TO THE PRINTED BOARD
CONTACTS NOT
SHOWN FOR CLARITY
CONTACT MATERIAL: COPPER ALLOY
CONTACT FINISH: 0.000015 [0.38 MICRONS] GOLD
OVER NICKEL OR COPPER
SCREW SUPPLIED
AS SPECIAL OPTION
0.100 [2.54] NOMINAL
0.240
[6.10]
RIGHT ANGLE SOLDER CONTACTS
MALE CONNECTOR SHOWN
FOR FACE DIMENSIONS OF INSULATOR VARIANT DESIRED,
SEE SGM SERIES INSULATOR DIMENSION PAGE 18.
ADD 0.030 [0.76] TO THE HOLE LOCATION DIMENSION 0.175 [4.48] WHEN MOUNTING
BRACKET (LB) AND VIBRATION LOCK TAB (V) ARE USED IN COMBINATION ON CONNECTOR
CONNECTOR
MOUNTING BRACKET
CONNECTOR
ALIGNMENT BAR
0.031
[0.79]
0.140
[3.56]
0.150
[3.81]
TYP.
0.095 TYP.
[2.41]
0.047 TYP.
[1.19] 0.040
[1.02]
A
B
A
B
0.175
[4.45]
0.285
[7.24]
2-56
UNC-2B
0.088 [2.24]
Ø HOLE
MATERIAL: PHOSPHOR BRONZE
FINISH: ZINC PLATE WITH CHROMATE SEAL
MATERIAL: NYLON, BLACK
HIGH DENSITY RECTANGULAR
RIGHT ANGLE
PRINTED BOARD MOUNT CONNECTORS
SIZE A B
50.314 [7.98] 0.290 [7.37]
70.394 [10.01] 0.290 [7.37]
90.488 [12.40] 0.290 [7.37]
11 0.364 [9.25] 0.415 [10.54]
14 0.456 [11.58] 0.415 [10.54]
20 0.646 [16.41] 0.415 [10.54]
26 0.832 [21.13] 0.415 [10.54]
29 0.926 [23.52] 0.415 [10.54]
34 0.864 [21.95] 0.550 [13.97]
44 1.112 [28.24] 0.550 [13.97]
50 1.240 [31.50] 0.550 [13.97]
PART
NUMBER A B CONNECTOR
VARIANTS
80213-0 0.105
[2.67]
0.205
[5.21] 4, 5, 7, 9
80213-1 0.140
[3.56]
0.240
[6.10] 11, 14, 20, 26, 29
80213-2 0.195
[4.95]
0.295
[7.49] 34, 44, 50
High
Density
Rectangular
24 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries
connectpositronic.com
SMPL SERIES
HIGH DENSITY RECTANGULAR
RIGHT ANGLE
PRINTED BOARD MOUNT CONNECTORS
RIGHT ANGLE PRINTED BOARD HOLE PATTERN
HOLE IDENTIFICATION SHOWN IS FOR MALE CONNECTOR
USE MIRROR IMAGE FOR FEMALE CONNECTOR
SUGGEST 0.105 [2.66] Ø HOLES IN PRINTED BOARD FOR CONNECTOR MOUNTING HOLES
SUGGEST 0.040 [1.01] Ø HOLES IN PRINTED BOARD FOR CONTACT TERMINATIONS
ADD 0.030 [0.76] TO THE MOUNTING HOLE POSITION WHEN MOUNTING BRACKET (LB) AND
VIBRATION LOCK TAB (V) ARE USED IN COMBINATION ON CONNECTOR
0.070
[1.78]
0.070 [1.78]
0.070 [1.78]
0.070 [1.78]
0.370 [9.40]
0.220 [5.59]
0.220 [5.59]
0.370 [9.40]
0.520 [13.21]
0.220
[5.59]
0.220
[5.59]
0.266
[6.76] 0.312
[7.92]
0.105 [2.67] Ø
MOUNTING HOLE
TYP.
0.045
[1.14]
TYP.
0.281
[7.14]
0.328
[8.33]
0.407
[10.34]
0.516
[13.11]
0.024
[0.61]
0.640
[16.26]
0.704
[17.88]
0.500
[12.70]
0.547
[13.89]
0.281
[7.14]
0.241
[6.12]
0.175 TYP.
[4.45]
0.175 TYP.
[4.45]
0.175 TYP.
[4.45]
0.175
[4.45]
TYP.
0.094 TYP.
[2.39]
0.047 TYP.
[1.19]
High
Density
Rectangular
25
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries
connectpositronic.com
SMPL SERIES
*NOTE: FOR DETAILS OF ITEMS LISTED IN
STEPS 5 AND 6, SEE HIGH DENSITY
RECTANGULAR CONNECTOR
ACCESSORIES SECTION ON
PAGES 26-34.
STEP 3 - CONNECTOR GENDER
M - Male Insulator
F - Female Insulator
12345678
SMPL 14 F 0 T 0 LB /AA
9
-14
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 7
STEP 1 - BASIC SERIES
SMPL Series.
STEP 9 - SPECIAL OPTIONS
-14 – Signal contacts plated
0.000030 [0.76µ] gold over
nickel.
-50 – Signal contacts plated
0.000050 [1.27µ] gold over
copper.
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS
*STEP 6 - LOCKING DEVICES
V – Lock tab.
VL – Lock lever.
0 – If no locking devices are required.
*STEP 5 - POLARIZING GUIDES AND
JACKSCREW SYSTEMS
N – Polarizing guides.
NSS – Stainless steel polarizing guides.
T – Fixed jackscrews.
0 – If no polarizing guides or jackscrews are required.
STEP 4 - CONTACT TERMINATION TYPE
0 – Standard termination, 90° angle.
STEP 2 - CONNECTOR VARIANTS
4, 5, 7, 9, 11, 14, 20, 26,
29, 34, 44, 50
STEP
EXAMPLE
STEP 8 - ENVIRONMENTAL
COMPLIANCE
OPTIONS
/AA - Compliant per EU Directive
2002/95/EC (RoHS)
NOTE: If compliance to environ-
mental legislation is not required,
this step will not be used.
Example: SMPL14F0T0LB
P
O
S
I
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
•
p
e
r
E
U
D
i
r
e
c
t
i
v
e
2
0
0
2
/
9
5
/
E
C
•
RoHS
RoHS
Compliant
STEP 7 - MOUNTING BRACKETS
LB – Mounting bracket.
0 – If no mounting bracket is required.
HIGH DENSITY RECTANGULAR
RIGHT ANGLE
PRINTED BOARD MOUNT CONNECTORS
NOTE: Once you have made a connector selection,
contact Technical Sales if you would like to receive a
drawing in DXF, PDF format or a 3-dimensional IGES file.
SK Drawing 3-dimensional model
