Data Sheet VI-200, VE-200 Features * * * * * * * * * * * * * RoHS compliant (VE-200) Up to 50 W/in3 cULus, cTUVus Up to 90% efficiency Size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7mm) Remote sense and current limit OVP, thermal shutdown Logic disable Wide range output adjust Compatible power booster modules ZCS power architecture Low noise FM control CE Marked Product Highlights The VI-200 family, with over 12 million units shipped, is Vicor's broad series of "zero-current-switching" component-level DC-DC converters. Operating at frequencies up to 2 MHz, VI-200 family converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. Booster modules (VI-Bxx) provide a simple, cost-effective, off-the-shelf solution for higher power output requirements. One or more boosters may be used to create synchronous arrays capable of supplying several kilowatts of output power. The flexibility of Vicor's power components is also available in half-size, half-power VI-J00 MiniMods. Packaging Options SlimModsTM, high power density, flangeless packages and FinModsTM, featuring integral finned heatsinks. SlimMod: Option suffix: - S Example: VI - 2XX - XX - S FinMod: Option suffix: - F1, - F2, -F3 or -F4 Examples: VI - 2XX - XX -F1, 0.25" fins, longitudinal VI - 2XX - XX -F2, 0.50" fins, longitudinal VI - 2XX - XX -F3, 0.25" fins, transverse VI - 2XX - XX -F4, 0.50" fins, transverse DC-DC Converters 50 to 200 Watts Converter Selection Chart * V I -2 *E for RoHS compliant Input Voltage Nominal 0 = 12 V 1 = 24 V W = 24 V 2 = 36 V 3 = 48 V N = 48 V 4 = 72 V T = 110 V 5 = 150 V 6 = 300 V 7 = 150/300 V Range 10 - 20 V 21 - 32 V 18 - 36 V 21 - 56 V 42 - 60 V 36 - 76 V 55 - 100 V 66 - 160 V 100 - 200 V 200 - 400 V 100 - 375 V **Maximum 5V Outputs 75 W 150 W 100 W 200 W 150 W 75 W Power (1) (2) (3) (4) (5) (6) *** Max Power** (1) (4) (2) (3) (4) (4) (4) (2) (5) (4) (6) Brownout *** n/a 18 V n/a 18 V 36 V n/a 45 V n/a 85 V 170 V 90 V >5 V Outputs 75 W 150 W 100 W 200 W 200 W 100 W Transient*** 22 V 36 V n/a 60 V 72 V n/a 110 V n/a 215 V 425 V n/a <5 V Outputs 15 A 30 A 20 A 40 A 40 A 20 A Brownout 75% of rated load; transient voltage for 1 second. Output Voltage Z Y 0 X W V T R M 1 P = = = = = = = = = = = 2.0 V 3.3 V 5.0 V 5.2 V 5.5 V 5.8 V 6.5 V 7.5 V 10 V 12 V 13.8 V 2 N 3 L J K 4 H F D B Product Grade Temperatures (C) = = = = = = = = = = = 15 V 18.5 V 24 V 28 V 36 V 40 V 48 V 52 V 72 V 85 V 95 V E C I M Operating = -10 to +85 = -25 to +85 = -40 to +85 = -55 to +85 E C I M = = = = Storage -20 to +100 -40 to +100 -55 to +100 -65 to +100 Overtemperature shutdown 95C typical (recycle power to restart) Output Power/Current Vout 5V Y = 50 W X = 75 W W= 100 W V = 150 W U = 200 W <5 V Y = 10 A X = 15 A W = 20 A V = 30 A U = 40 A For additional output power use "Boosters". Change (VI-2xx-xx) to (VI-Bxx-xx) Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-200 DC-DC Converters 50 to 200 Watts Set your site on VICOR at www.vicorpower.com Rev. 1.7 Page 1 of 5 CONVERTER SPECIFICATIONS (typical at TBP = 25C, nominal line and 75% load, unless otherwise specified) INPUT SPECIFICATIONS VI-200 E-Grade Parameter Min Typ Inrush charge 120 x 10 Input reflected ripple current - pp VI-200 C-, I-, M-Grade Max Min Typ -6 120 x 10 10% 200 x 10 10% ( ) 20+20 Log ( Vin ) ( ) 30+20 Log Vin 25+20 Log Vin Input ripple rejection Max -6 Vout Vout Vout No load power dissipation 1.35 2 1.35 Units -6 Coulombs Test Conditions Nominal line IIN Nominal line, full load dB 120 Hz, nominal line dB 2400 Hz, nominal line 2 Watts Typ Max Units OUTPUT CHARACTERISTICS VI-200 E-Grade Parameter Min VI-200 C-, I-, M-Grade Typ Max 1% 2% 0.5% 1% VNOM Load/line regulation 0.5% 0.05% 0.2% VNOM LL to HL, 10% to Full Load Load/line regulation 1% 0.2% 0.5% VNOM LL to HL, No Load to 10% 0.02 % / C Over rated temp. Setpoint accuracy Min Output temperature drift 0.02 0.01 Long term drift 0.02 0.02 Output ripple - pp: 2 V, 3.3 V Test Conditions %/1K hours 150 60 100 mV 20 MHz bandwidth 5V 5% 2% 3% VNOM 20 MHz bandwidth 10 - 48 V 3% 0.75% 1.5% VNOM 20 MHz bandwidth 110% VNOM Trim range1 50% Total remote sense compensation 0.5 110% 0.5 125%2 OVP set point Current limit Short circuit current 3 50% 115% 125%2 Volts 0.25 V max. neg. leg 135% VNOM Recycle power Automatic restart 105% 135% 105% 125% INOM 20% 140% 20% 130% INOM Max Min CONTROL PIN SPECIFICATIONS VI-200 E-Grade Parameter Min Typ VI-200 C-, I-, M-Grade Typ Max Units Gate out impedance 50 50 Ohms Gate in impedance 1000 1000 Ohms 6 6 Volts Gate in open circuit voltage Gate in low threshold 0.65 Gate in low current Power sharing accuracy 0.65 6 0.95 1.05 Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 Use open collector Volts 6 0.95 Test Conditions mA 1.05 VI-200 DC-DC Converters 50 to 200 Watts Set your site on VICOR at www.vicorpower.com Rev. 1.7 Page 2 of 5 CONVERTER SPECIFICATIONS (cont.) DIELECTRIC WITHSTAND CHARACTERISTICS VI-200 E-Grade Parameter Input to output Output to baseplate Input to baseplate Min Typ VI-200 C-, I-, M-Grade Max Min Typ Max Units Test Conditions Baseplate earthed 3,000 3,000 VRMS 500 500 VRMS 1,500 1,500 VRMS THERMAL CHARACTERISTICS VI-200 E-Grade Parameter Min Typ Efficiency Min Typ 78 - 88% 80 - 90% 0.07 0.07 Baseplate to sink thermal impedance Thermal shutdown4 (Drivers only) VI-200 C-, I-, M-Grade Max 90 95 105 90 Max Min 95 Max Units C/Watt 105 C Test Conditions With Vicor P/N 20266 Cool and recycle power to restart MECHANICAL SPECIFICATIONS VI-200 E-Grade Parameter Min Typ VI-200 C-, I-, M-Grade 6.0 (170) Weight Typ 6.0 (170) Max Units Test Conditions Ounces (Grams) Notes: 1 10 V, 12 V and 15 V outputs, standard trim range 10%. Consult factory for wider trim range. 3.3 V output trim range 2.20 to 3.63 V 2 3 4 131% nominal for booster modules. Output voltages of 3.3 V or 5 V incorporate foldback current limiting; all other outputs provide constant current limiting. No overtemp protection in booster modules. Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-200 DC-DC Converters 50 to 200 Watts Set your site on VICOR at www.vicorpower.com Rev. 1.7 Page 3 of 5 MECHANICAL DRAWING .50 (12,7) .30.015 (7,6)(0,38) 1.80 (45,7) 4.60 (116,8) 3.60 (91,4) Standard 0.080 (2,0) Dia (2) places Solder plate over copper alloy 4 2.10 (53,3) .15 (3,8) 9 3 2 8 7 6 1 5 VI-200 1.40 1.00 (35,6) .70 (25,4) .40 (17,8) (10,2) .35.015 (8,9)(0,38) FULL R .15 (3,8) Product ID this surface RoHS 0.080 (2,0) Dia (2) places Matte tin over copper alloy Pin # Function 1 +In 2 Gate In 3 Gate Out 4 -In 5 +Out 6* +Sense 7* Trim 8* -Sense 9 -Out * Do not connect on booster modules Standard .040 (1,0) Dia (7) places Solder plate over copper alloy RoHS .040 (1,0) Dia (7) places Matte tin over copper alloy 2.40 (61,0) 4.20 (106,7) .22 (5,6) MIN .50 (12,7) .30 (7,6) Min 1.75 (44,5) +.030 (0,76) -.000 (0) .01 .12 (3,0) Aluminum Base Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-200 DC-DC Converters 50 to 200 Watts Set your site on VICOR at www.vicorpower.com Rev. 1.7 Page 4 of 5