G3R-OA202SZN 5-24DC - OMRON

Model 533, 534, 535

www.vishay.com Vishay Spectrol

Revision: 17-May-2018 1Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

7/8" (22.2 mm) Multi Turn Wirewound Potentiometer -

533: 3 Turns / 534: 10 Turns / 535: 5 Turns

DESIGN SUPPORT TOOLS

FEATURES

• Bushing and servo mount designs available

• Linearity ± 0.25 %, down to 0.05 % on request

• Special resistance tolerances to 1 %

• Rear shaft extensions and support bearing

• Metric shaft available

• Dual gang configuration and concentric shafts

• High torque, center tap, slipping clutch on request

• Special markings and front shaft extensions

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

QUICK REFERENCE DATA

Sensor type ROTATIONAL, multi turn wirewound

Output type Output by turrets

Market appliance Industrial

Dimensions 7/8" (22.2 mm)

click logo to get started

Available

Models

ELECTRICAL SPECIFICATIONS

PARAMETER MODEL 533 MODEL 534 MODEL 535

Resistance range - standard values 50  to 20 k100  to 100 k50  to 50 k

Capability range 5  to 60 k10  to 200 k5  to 100 k

Standard tolerance ± 5 % ± 5 % ± 5 %

Linearity (independent) ± 0.25 % ± 0.25 % ± 0.25 %

Noise 100  ENR 100  ENR 100  ENR

Rotation (electrical and mechanical) 1080° +10°

-0° 3600° +10°

-0° 1800° +10°

-0°

Power rating (at 70 °C) 1.0 W 2.0 W 1.5 W

Insulation resistance 1000 M minimum 500 VDC

Dielectric strength 1000 VRMS minimum 60 Hz

Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater

Temperature coefficient 20 ppm/°C (standard values, wire only)

End voltage 0.25 % of total applied voltage, maximum

Phasing CCW end points - section 2 phased to section 1 within ± 2°

Taps Center tap only

MARKING

Unit identification

Manufacturer’s name and model number,

resistance value and tolerance, linearity

specification date code and terminal

identification.

Example of a marking for a standard part:

534-11103

RESISTANCE VALUES

533 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K

534 ( 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K

535 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K

Model 533, 534, 535

www.vishay.com Vishay Spectrol

Revision: 17-May-2018 2Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Mounting hardware, washer and panel nut, nickel plated

ORDERING INFORMATION

534B2103203JC470

MODEL STYLE GANGS OHMIC VALUE

GANGS No 1

OHMIC VALUE

GANGS No 2

TOLERANCE ON

OHMIC VALUE LINEARITY SPECIAL REQUEST

533

534

535

B: bushing

S: servo

470 = 47 

222 = 2.200 

103 = 10 k

For ohmic value

range see

electrical

specification

470 = 47 

222 = 2.200 

103 = 10 k

For ohmic value

range see

electrical

specification

J = ± 5 %

F = ± 1 %

C = ± 0.25 %

L = ± 0.2 %

Special code

xxxx

PART NUMBER DESCRIPTION (for information only)

534- 1 2 103 203 xxxx

MODEL STYLE GANGS OHMIC VALUE

GANGS No 1

OHMIC VALUE

GANGS No 2 SPECIAL

B: 1

S: 2

SINGLE SECTION DIMENSIONS in inches (millimeters)

SCHEMATIC

0.750 (19.05)

± 0.015

0.312 (7.92)

± 0.015

0.062 (1.57)

0.200 MIN. (5.08)

Ø 0.875

(22.22)

± 0.015

0.030 MAX. (0.76)

0.812 (20.62)

± 0.031

Ø 0.2497 (6.34)+ 0.0000

- 0.0003

0.032 x 0.032

(0.81) x (0.81) DP

± 0.010

3/8 - 32UNEF - 2A

Ø 0.4062

(10.32)

+ 0.0000

- 0.0020

9 mm x 0.75 P

Ø 6.00 mm

SCREWDRIVER SLOT

+ 0.000

- 0.0003

0.850 (21.59)

± 0.015 0.375 (9.52)

± 0.031

0.062 (1.57)

Ø 0.7500 (19.05)+ 0.0000

- 0.0005

Ø 0.875 (22.22)

Ø 0.1248 (3.17) + 0.0000

- 0.0003

0.057 (1.45) MIN.

0.300 (7.62) MIN.

Ø 0.750 (19.05) MAX.

Ø 0.875

(22.22)

± 0.015

0.062 (1.57)

30°

TYP.

R 0.625 MAX.

(15.88)

BUSHING

MOUNT MODEL:

534B/534-1

SERVO

MOUNT MODEL:

534S/534-2

METRIC SHAFT: 534B...8872

Model 533, 534, 535

www.vishay.com Vishay Spectrol

Revision: 17-May-2018 3Document Number: 57065

For technical questions, contact: sferprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

POWER RATING CHART

Note

• Nothing stated herein shall be construed as a guarantee of

quality or durability

MECHANICAL SPECIFICATIONS

PARAMETER

Bearing type Bushing: sleeve bearing Servo: ball bearing

Torque (maximums): starting

Section 1

Section 2

534

0.5 oz.-in (36 g-cm)

0.9 oz.-in (65 g-cm)

533/535

0.7 oz.-in (50 g-cm)

1.1 oz.-in (79 g-cm)

Torque (maximums): running

Section 1

Section 2

534

0.4 oz.-in (28.80 g-cm)

0.7 oz.-in (50.40 g-cm)

533/535

0.6 oz.-in (43.20 g-cm)

0.9 oz.-in (64.8 g-cm)

Weight (maximums)

Section1

Section 2

0.75 oz. (21.26 g)

1.25 oz. (35.44 g)

Stop strength 75 oz.-in (static) (5.4 kg-cm)

Ganging 2 sections maximum

RATED POWER IN W

0 20 40 60 80 100 120 140 160

534

535

533

AMBIENT TEMPERATURE IN °C

ENVIRONMENTAL SPECIFICATIONS

Vibration 15 g thru 2000 Hz

Shock 50 g

Rotational life (shaft revolution)

533

534

534 (servo)

535

300 000

1 000 000

> 1 000 000

500 000

Load life 900 h

Temperature range -55 °C to +125 °C

RESISTANCE ELEMENT DATA

RESISTANCE VALUE

()

RESOLUTION

(%) OHMS PER TURN

MAXIMUM CURRENT

AT 70 °C AMBIENT

(mA)

MAXIMUM VOLTAGE

ACROSS COIL

(V)

533 534 535 533 534 535 533 534 535 533 534 535 533 534 535

50 - 50 0.149 - 0.120 0.0746 - 0.0603 141.0 - 173.0 7.07 - 8.66

100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2

200 200 200 0.097 0.037 0.061 0.1954 0.0746 0.1220 70.7 100.0 86.6 14.1 20.0 17.3

500 500 500 0.069 0.031 0.049 0.3424 0.1520 0.2459 44.7 63.2 54.7 22.4 31.6 27.4

1K 1K 1K 0.063 0.025 0.041 0.6331 0.2459 0.4113 31.6 44.7 38.7 31.6 44.7 38.7

2K 2K 2K 0.041 0.021 0.031 0.8206 0.4113 0.6331 22.4 31.6 27.4 44.7 63.2 54.8

5K 5K 5K 0.044 0.016 0.034 2.2330 0.8206 1.7230 14.1 20.0 17.3 70.7 100.0 86.6

10K 10K 10K 0.034 0.017 0.030 3.4510 1.7230 3.0160 10.0 14.1 12.2 100.0 141.0 122.0

20K 20K 20K 0.031 0.015 0.020 6.1790 3.0160 3.9910 7.07 10.0 8.66 141.0 200.0 173.0

- 50K 50K - 0.009 0.015 - 4.6690 7.4560 - 6.32 5.47 - 316.0 274.0

- 100K - - 0.007 - - 7.4560 - - 4.47 - - 447.0 -

---------------

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.