PRODUCT DATASHEET TC-HPK110-v1.1 FrigoDynamics(R) TC HPK-FinTM 110 Hybrid Heat Exchanger for CoB LEDs 50W The TC HPK-FinTM solution is a 2-phase heat exchanger allowing high levels of power dissipation with zero power consumption. This design trades the low profile of the OC version for a shorter length. Ideal for recessed downlights with constrained space in horizontal direction. Passive, no CO2 emissions Light weight Compact Zero noise levels No operating cost No lifetime issues Please Note: Registered German Utility Model DBGM protected PCT Patent Application pending Easy installation Specifications Thermal Resistance (Tc) Thermal Resistance (Hs) Design power Storage Temperature Surface finish Weight Regulatory Compliance Value 1.15 C/W 1, 2 0.95 C/W 1 50W 3 -40C to 100C Black 310g & 300g RoHS Conditions Measured between LED Tc - ambient Measured between LED mounting base and ambient Electrical Load Air temperature surrounding the unit Anodized Complete unit: variation 1 & variation 2 No further compliance necessary for passive devices 1 Thermal resistance is measured in free air without airflow obstructions and in a horizontal orientation. 2 This value is impacted by the thermal interface material used, especially with smaller heat sources. 3 Design power is based on 50 C temperature difference (T) between maximum Tc point on LED module to ambient temperature. Copyright (c) 2013 FrigoDynamics GmbH All rights reserved www.frigodynamics.com info@frigodynamics.com PRODUCT DATASHEET TC-HPK110-v1.1 Dimensions (~ mm) Design Variation 1 Design Variation 2 3D envelope CAD file available upon request and endorsement of FrigoDynamics NDA Product Guide Part Number TC 0800 HPK01-110AN TC 0500 HPK01-110AN TC 0801 HPK01-110AN TC 0502 HPK01-110AN TC 0503 HPK01-110AN TC 0505 HPK01-110AN TC 0506 HPK01-110AN TC 0508 HPK01-110AN Description Blank Surface Blank Surface Philips/Tridonic(R) mounting pattern Xicato mounting pattern Bridgelux(R) mounting pattern Philips/VS/Osram/Tridonic pattern Xicato(R) mounting pattern Citizen(R) mounting pattern Specifics Variation 1 Variation 2 Variation 1 for Fortimo DLM/ STARK DLE Variation 2 for XLMTM Variation 2 for all BXRA, VEROTM 13, 18, 29 Variation 2 for Soleriq/SLM/SLE/WU-M Variation 2 for XSMTM Variation 2 for CLL032, CLL042, CLL052 Please contact us, should you have specific requirements not covered in the data sheets. Disclaimer Information given by FrigoDynamics is believed to be accurate and reliable. However, since every potential application and the environment our solutions operate in cannot be anticipated, FrigoDynamics does not guarantee suitability in all circumstances. Thermal performance may vary depending on the enclosure, the operating orientation and natural airflow. FrigoDynamics shall not be liable for incidental or consequential damages of any kind. Copyright (c) 2013 FrigoDynamics GmbH All rights reserved www.frigodynamics.com info@frigodynamics.com