ELD-2212 ELD-2212 /Absolute Maximum Rating /Item /Outline drawing Hon /Rating /Unit /Power supply voltage V dd 5 V /Power Dissipation PD 150 mW /Lamp output V out 230 Vp-p /Operating temperature Topr -30+85 /Storage temperature Tstg -40+90 /Reflow soldering conditions Tsol 230x10sec /Electro characteristics Symbol Vdd ELD-XXXX 0.8 EL1 EL2 (Ta=25) /Conditions Symbol Min Typ Max Unit /Item 94-000 Coil /Symbol 6.0 Vss (Ta 25) /Power supply voltage Vdd 2.2 3.0 3.6 V /Current consumption Idd Vdd=3.0V 30 45 mA /Stand-by current Ia Vdd=3.0V 1.0 10 A /Hon voltage on Von Vdd=3.0V Vdd-0.5 Vdd V /Hon current on Ion Vdd=3.0V 10 50 A /Hon voltage off V off Vdd=3.0V Vdd-2 V /Lamp output voltage V out Vdd=3.0V 120 160 Vpp /Frequency fe Vdd=3.0V 400 Hz /Lamp capacitance CL 10,000 pF Type 9.0 1.6 2.0 NO Lot.No. /Unit : mm 2.2 2.1 1.6 2.1 4.0 /The above values are measured by a lamp equivalent circuit. 1.6 1.6 The following soldering patterns are recommended for reflow-soldering: /Circuit diagram 2.2 Vdd / Lamp equivalent circuit EL1 Vdd 1M Coil OSC H D1 Bridge EL1 Hon 47nF FF1 EL2 FF6 EL2 100 20nF Vss Vss 10k Coil Characteristics Pd-Ta Pd-Ta Characteristics Vdd-Idd Vdd-Idd Characteristics Vdd-Brightness Vdd-Brightness Characteristics Vdd-Brightness Vdd-Brightness Characteristics 40 150 100 20 10 50 0 -20 30 0 0 20 40 Ta [] 60 80 100 40 30 16cm2 20 10 1.5 2 2.5 Vdd [V] 3 3.5 40 30 16cm2 20 10 0 0 1 Brightness [cd/m2] 200 TB-BG(NEC) 50 50 Brightness [cd/m2] 50 Idd [mA] Pd [mW] TB-G(NEC) 250 1 1.5 2 2.5 Vdd [V] 3 3.5 1 1.5 2 2.5 3 3.5 Vdd [V] 135