MCH15 Ceramic capacitors Multi-layer ceramic chip capacitors MCH15 (1005 (0402) size, chip capacitor) !External dimensions (Units : mm) !Features 1) Small size (1.0 x 0.5 x 0.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic mounting or in bulk cases. 3) Precise uniformity of shape and dimensions facilitates highly efficient automatic mounting. 4) Barrier layer and end terminations to improve solderability. 0.1Min. 0.3Min. 0.50.05 0.50.05 0.50.05 1.00.05 0.50.05 !Structure External electrode (coating layer) Internal electrode Ceramic element External electrode (barrier layer) External electrode (thick membrane layer) !Product designation Basic ordening unit (pcs.) Code Product thickness Packaging specifications Reel K 0.5mm Paper tape (width 8 mm, pitch 2 mm) 180mm (7in.) 10,000 L 0.5mm Paper tape (width 8 mm, pitch 2 mm) 330mm (13in.) 50,000 C 0.5mm Bulk case - 50,000 Reel (180, 330mm) : compatible with EIAJ ET-7200A Bulk case: compatible with EIAJ ET-7201A Part No. M C H Rated voltage Code Voltage 2 25V 3 16V 5 50V Packaging style 1 5 5 F N 1 0 3 Z K Nominal Capacitance tolerance Capacitance-temperature characteristics Code Code Operating temperature (C) Temp. coefficient or percent change capacitance Code tolerance A CG(C0G) 030ppm/C -55~+125 C 0.25pF (0.5 ~ 5pF) CN R -55~+125 15% D 0.5pF (5.1 ~ 10pF) 3-digit designation J 5% (11pF or more) B -25~+85 10% according to IEC (X7R) (-55~+125) (15%) K 10% FN F -25~+85 +30%,-80% (Y5V) (+22%,-82%) (-30~+85) Z + 80%, -20% The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors !Capacitance range For thermal compensation Part number Capacitance (pF) Temperature characteristics Rated voltage (V) Tolerance MCH15 Part number A (CG) (C0G) Capacitance (pF) 50V 47 51 56 1.1 1.2 1.3 62 68 75 1.5 1.6 1.8 82 91 100 C ( 0.25pF) 110 120 130 2.7 3 3.3 150 160 180 3.6 3.9 4 200 220 240 4.3 4.7 5 270 300 330 5.1 5.6 6 360 390 430 6.2 6.8 7 470 510 560 7.5 8 8.2 D ( 0.5pF) Rated voltage (V) Tolerance 0.5 0.75 1 2 2.2 2.4 Temperature characteristics MCH15 A (CG) (C0G) 50V J ( 5%) Product thickness (mm) 0.5 0.05 9 9.1 10 11 12 13 15 16 18 20 22 24 J ( 5%) 27 30 33 36 39 43 The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors High dielectric constant Part number Capacitance (pF) MCH15 Temperature characteristics Rated voltage (V) Tolerance CN (R) (B) (X7R) 50V 16V K ( 10%) FN (F) (Y5V) 50V 25V 16V Z ( +80, -20%) 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 (0.01F) 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 (0.1F) 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 Product thickness (mm) 0.5 0.05 The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors !Characteristics Class 1 (For thermal compensation) Temperature characteristics A (CG) (C0G) Item Operating temperature Test methods/conditions (based on JIS C 5102) -55C ~ 125C Nominal capacitance (C) Must be within the specified tolerance range. Based on paragraph 7.8 and paragraph 9 Measured at room temperature and standard humidity, Dissipation factor (tan) 100/(400+20C)% or less: Less than 30 pF 0.1% or less : 30 pF or larger 1000pF or less Measurement frequency : 1 0.1MHz Measurement voltage : 1 0.1Vrms. Over 1000pF Measurement frequency : 1 0.1kHz Measurement voltage : 1 0.1Vrms. Insulation resistance (IR) Withstanding voltage Temperature characteristics Terminal adherence Appearance Resistance to vibration Rate of capacitance change Dissipation factor (tan) Appearance Rate of capacitance change There must be no mechanical damage. Must be within initial tolerance. Must satisfy initial specified value. 10,000M or 500M F, whichever is smaller The temperature coefficients in table 12, paragraph 7.12 are calculated at 20C and high temperature. Based on paragraph 8.11. 2. Apply 5N for 10 1s in the direction indicated by the arrow. Chip is mounted to a board in the manner shown on the right, subjected to vibration (type A in paragraph 8.2), and measured 24 2 hrs. later. Pressure (5N) Test board Capacitor Board Based on paragraph 8.13 Soldering temperature : 235 5C Soldering time : 2 0.5s Based on paragraph 8.14. Soldering temperature : 260 5C Soldering time : 5 0.5s Preheating : 150 10C for 1 to 2 min. The insulation must not be damaged. 2.5% or 0.25 pF, whichever is larger. Must satisfy initial specified value. Insulation resistance 10,000M or 500M F, whichever is smaller Rate of capacitance change Based on paragraph 7.1 Apply 300% of the rated voltage for 1 to 5s then measure. There must be no mechanical damage. Dissipation factor (tan) Appearance Based on paragraph 7.6 Measurement is made after rated voltage is applied for 60 5s. There must be no mechanical damage. 2.5% or 0.25 pF, whichever is larger. Insulation resistance Rate of capacitance change Hightemperature load test No detachment or signs of detachment. Must satisfy initial specified value. Appearance Humidity load test Within 0 30ppm/C Dissipation factor (tan) Withstanding voltage Temperature cycling The insulation must not be damaged. At least 3/4 of the surface of the two terminals must be covered with new solder. Solderability Resistance to soldering heat 10,000M or 500M F, whichever is smaller There must be no mechanical damage. 7.5% or 0.75 pF, whichever is larger. Dissipation factor (tan) 0.5% or less Insulation resistance 500M or 25M F, whichever is smaller Appearance There must be no mechanical damage. Rate of capacitance change 3.0% or 0.3 pF, whichever is larger. Dissipation factor (tan) 0.3% or less Insulation resistance 1,000M or 50M F, whichever is smaller Based on paragraph 9.3 Number of cycles : 5 Capacitance measured after 24 2 hrs. Based on paragraph 9.9 Test temperature : 40 2C Relative humidity : 90% to 95% Applied voltage : rated voltage Test time : 500 to 524 hrs. Capacitance measured after 24 2 hrs. Based on paragraph 9.10 Test temperature : Max. operating temp. Applied voltage : rated voltage x 200% Test time : 1,000 to 1,048 hrs. Capacitance measured after 24 2 hrs. The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors Class 2 (High dielectric constant) Temperature characteristics CN (R) (B) (X7R) FN (F) (Y5V) -55C ~ +125C -30C ~ +85C Item Operating temperature Nominal capacitance (C) Dissipation factor (tan) Insulation resistance (IR) Withstanding voltage Temperature characteristics Terminal adherence Appearance Resistance to vibration Rate of capacitance change Dissipation factor (tan) Solderability Appearance Resistance to soldering heat Within 15% + 22, + 82% No detachment or signs of detachment There must be no mechanical damage. Must be within initial tolerance. Must satisfy initial specified value. Within 20.0% 10,000M or 500M F, whichever is smaller Rate of capacitance change Within 7.5% Within 20.0% Insulation resistance 10,000M or 500M F, whichever is smaller Insulation resistance Appearance Rate of capacitance change Dissipation factor (tan) Insulation resistance The temperature coefficients in paragraph 7.12, table 8, condition B, are based on measurements carried out at 20C, with no voltage applied. Based on paragraph 8. 11. 2. Apply 5N for 10 1s in the direction indicated by the arrow. Pressure (5N) Test board Capacitor Chip is mounted to a board in the manner shown on the right, subjected to vibration (type A in paragraph 8.2), and measured 48 4 hrs. later. Board Based on paragraph 8. 13 Soldering temperature : 235 5C : 2 0.5s Soldering time Based on paragraph 8. 14. Soldering temperature : 260 5C Soldering time : 5 0.5s Preheating : 150 10C for 1 to 2 min. The insulation must not be damaged. Must satisfy initial specified value. Dissipation factor (tan) Based on paragraph 7.1 Apply 250% of the rated voltage for 1 to 5s then measure. There must be no mechanical damage. Dissipation factor (tan) Rate of capacitance change Based on paragraph 7.6 Measurement is made after rated voltage is applied for 60 5s. There must be no mechanical damage. Within 5.0% Insulation resistance Appearance Hightemperature load test The insulation must not be damaged. Must satisfy initial specified value. Appearance Humidity load test 10,000M or 500M F, whichever is smaller Dissipation factor (tan) Withstanding voltage Temperature cycling Based on paragraph 7.8 Measured at room temperature and standard humidity, Measurement frequency: 1 0.1 kHz 2.5% or less 5.0% or less (when rated voltage is 16V: 3.5% or less) (when rated voltage is 16V: 7.5% or less) Measurement voltage : 1.0 0.2 Vrms. Must be within the specified tolerance range. At least 3/4 of the surface of the two terminals must be covered with new solder. Rate of capacitance change Test methods/conditions (based on JIS C 5102) There must be no mechanical damage. 12.5% or less Within 30.0% 5.0% or less 7.5% or less (when rated voltage is 16V: 10.0%) 500M or 25M F, whichever is smaller Based on paragraph 9.3 Number of cycles : 5 Capacitance measured after 48 4 hrs. Based on paragraph 9.9 Test temperature : 40 2C Relative humidity : 90% to 95% Applied voltage : rated voltage Test time : 500 to 524 hrs. Capacitance measured after 48 4 hrs. There must be no mechanical damage. Within 10.0% Within 30.0% 5.0% or less 7.5% or less (when rated voltage is 16V: 10.0%) Based on paragraph 9.10 Test temperature : Max. operating temp. Applied voltage : rated voltage x 200% Test time : 1,000 to 1,048 hrs. Capacitance measured after 48 4 hrs. 1,000M or 50M F, whichever is smaller The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors !Packaging specifications (Units : mm) Reel 9.0 0.3 180 mm plastic reel t J A D 13 0.2 E C B 11.4 1.0 60 + 1 0 0 180 -1.5 Taping F t1 Label position H Pulling direction (Paper taping) 9.5 0.5 330 mm plastic reel F H J t t1 Symbol Size A 80 1 E 8.0 3.5 1.75 2.0 4.0 1.5 0.7 0.8 Dimensions 0.3 0.05 0.1 0.05 0.1 +0.1 0.05 MAX. 0 330 2 D 13 0.2 C Symbol 13.5 1.0 B 0.65 0.1 1.15 0.1 1005 Label position EIAJ ET-7200A compliant Bulk case slider 12 shutter 36 110 EIAJ ET-7201 A compliant MCH15 50,000pcs/case The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors !Electrical characteristics gA (C0G) Characteristics 1000000 4 100000 3 10000 2 1 1000 0 IMPEDANCE () RATE OF CAPACITANCE CHANGE : (%) 5 -1 -2 -3 -4 -5 -50 0 50 1pF 100 10pF 10 1 100pF 0.1 100 1 10 100 1000 TEMPERATURE (C) FREQUENCY (MHz) Fig.1 Capacitance-temperature characteristics Fig.2 Impedance-frequency characteristics 10000 gCN (X7R) Characteristics 10000 20 1000 10 0 -20 -30 10 5 -80 -40 0 40 80 120 IMPEDANCE () 100 -10 Dissipation factor (%) CAPACITANCE CHANGE : (%) 30 10 1 1,000pF 0.1 10,000pF 0.01 0.001 160 1 10 100 1000 10000 FREQUENCY (MHz) TEMPERATURE : (C) Fig.4 Impedance-frequency characteristics Fig.3 Capacitance-temperature characteristics 10000 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 1000 60 50 40 30 20 10 -80 -40 0 40 80 120 TEMPERATURE : (C) Fig.5 Capacitance-temperature characteristics 160 IMPEDANCE () 100 Dissipation factor (%) CAPACITANCE CHANGE : (%) gFN (Y5V) Characteristics 10 1 1,000pF 0.1 10,000pF 0.01 100,000pF 0.001 1 10 100 1000 10000 FREQUENCY (MHz) Fig.6 Impedance-frequency characteristics The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors gTemperature cycling test A (C0G) Characteristics (100pF) 0.6 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -55 / +125C 100cyc 1.0 0 0.5 1 x 1012 0.3 0.2 -2.0 0.1 -3.0 1 x 1011 1 x 1010 0 TESTED INITIAL VALUE Fig.7 Rate of capacitance change TESTED Fig.9 Insulation resistance CN (X7R) Characteristics (1,000pF) 6.0 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -55 / +125C 100cyc 10.0 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -55 / +125C 100cyc 5.0 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -55 / +125C 100cyc 1 x 1012 0 4.0 IIR : () 5.0 3.0 -5.0 2.0 -10.0 1.0 -15.0 1 x 1011 1 x 1010 0 INITIAL VALUE TESTED INITIAL VALUE Fig.10 Rate of capacitance change 6.0 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -30 / +85C 100cyc 20.0 TESTED INITIAL VALUE Fig.11 tan FN (Y5V) Characteristics (10,000pF) 30.0 TESTED Fig.12 Insulation resistance JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -30 / +85C 100cyc 5.0 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -30 / +85C 100cyc 1 x 1012 0.0 4.0 IR : () 10.0 tan : (%) RATE OF CAPACITANCE CHANGE : (%) INITIAL VALUE TESTED Fig.8 tan tan : (%) RATE OF CAPACITANCE CHANGE : (%) 15.0 JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -55 / +125C 100cyc 0.4 -1.0 INITIAL VALUE JIS C 5102 9. 3 SAMPLE SIZE : n = 50pcs -55 / +125C 100cyc IR : () 2.0 tan : (%) RATE OF CAPACITANCE CHANGE : (%) 3.0 3.0 -10.0 2.0 -20.0 1.0 1 x 1011 0 -30.0 INITIAL VALUE TESTED Fig.13 Rate of capacitance change INITIAL VALUE Fig.14 tan TESTED 1 x 1010 INITIAL VALUE TESTED Fig.15 Insulation resistance The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors gHigh-temperature load test 0.3 -1.0 0.2 -2.0 0.1 1 x 1011 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +125C 1,000h OVERLOAD : 200% RATED VOLTAGE 0 0 240 420 720 0 1000 240 480 720 1000 1 x 1010 0 240 480 720 1000 TIME (h) TIME (h) TIME (h) Fig.16 Rate of capacitance change Fig.17 tan Fig.18 Insulation resistance CN (X7R) Characteristics (1,000pF) 6.0 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +125C 1,000h OVERLOAD : 200% RATED VOLTAGE 5.0 5.0 0 3.0 2.0 -10.0 1.0 0 240 480 720 1 x 1012 1 x 1011 1 x 1010 0 1000 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +125C 1,000h OVERLOAD : 200% RATED VOLTAGE 4.0 -5.0 -15.0 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +125C 1,000h OVERLOAD : 200% RATED VOLTAGE IR : () 10.0 0 240 480 720 0 1000 240 480 720 1000 TIME (h) TIME (h) TIME (h) Fig.19 Rate of capacitance change Fig.20 tan Fig.21 Insulation resistance FN (Y5V) Characteristics (10,000pF) 6.0 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +85C 1,000h OVERLOAD : 200% RATED VOLTAGE 20.0 1 x 1012 tan : (%) 10.0 0.0 -10.0 4.0 3.0 1 x 1011 2.0 -20.0 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +85C 1,000h OVERLOAD : 200% RATED VOLTAGE 1.0 -30.0 0 240 480 720 1000 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +85C 1,000h OVERLOAD : 200% RATED VOLTAGE 5.0 IR : () 30.0 1 x 1012 0.4 IR : () 0.0 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +125C 1,000h OVERLOAD : 200% RATED VOLTAGE 0.5 tan : (%) 1.0 15.0 RATE OF CAPACITANCE CHANGE : (%) 0.6 JIS C 5102 9. 10 SAMPLE SIZE : n = 50pcs +125C 1,000h OVERLOAD : 200% RATED VOLTAGE 2.0 -3.0 RATE OF CAPACITANCE CHANGE : (%) A (C0G) Characteristics (100pF) tan : (%) RATE OF CAPACITANCE CHANGE : (%) 3.0 0 0 240 480 720 1000 1 x 1010 0 240 480 720 1000 TIME (h) TIME (h) TIME (h) Fig.22 Rate of capacitance change Fig.23 tan Fig.24 Insulation resistance The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification. MCH15 Ceramic capacitors gHumidity load test A (C0G) Characteristics (100pF) 1.0 0.0 -2.0 0.1 480 720 1 x 1010 0 1000 240 480 720 0 1000 240 480 720 1000 TIME (h) TIME (h) TIME (h) Fig.25 Rate of capacitance change Fig.26 tan Fig.27 Insulation resistance CN (X7R) Characteristics (1,000pF) 6.0 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 5.0 0 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 5.0 3.0 2.0 -10.0 1.0 1 x 1011 0 0 240 480 720 1 x 1012 4.0 -5.0 -15.0 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE IR : () 10.0 0 1000 240 480 720 1000 1 x 1010 0 240 480 720 1000 TIME (h) TIME (h) TIME (h) Fig.28 Rate of capacitance change Fig.29 tan Fig.30 Insulation resistance FN (Y5V) Characteristics (10,000pF) 6.0 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 20.0 1 x 1012 tan : (%) 10.0 0.0 4.0 3.0 -10.0 2.0 -20.0 1.0 -30.0 1 x 1011 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 0 0 240 480 720 1000 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 5.0 IR : () 30.0 1 x 1012 1 x 1011 0 240 tan : (%) RATE OF CAPACITANCE CHANGE : (%) 0.3 0.2 0 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 0.4 -1.0 15.0 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE 0.5 IR : () 2.0 -3.0 RATE OF CAPACITANCE CHANGE : (%) 0.6 JIS C 5102 9. 9 SAMPLE SIZE : n = 50pcs +40C 90 ~ 95%RH 1,000h OVERLOAD : THE RATED VOLTAGE tan : (%) RATE OF CAPACITANCE CHANGE : (%) 3.0 0 240 480 720 1000 1 x 1010 0 240 480 720 1000 TIME (h) TIME (h) TIME (h) Fig.31 Rate of capacitance change Fig.32 tan Fig.33 Insulation resistance The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification.