www.clare.com
2R11
TS120
Absolute Maximum Ratings @ 25ºC
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter Ratings Units
Input Power Dissipation 1150 mW
Input Control Current, Relay 50 mA
Peak (10ms) 1 A
Input Control Current, Detector 100 mA
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Electrical Characteristics @25ºC: Relay Section
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Blocking Voltage (Peak) - VL- - 350 VP
Load Current
Continuous - IL- - 120 mA
Peak t=10ms ILPK - - 350 mA
On-Resistance IL=120mA RON -2335
Off-State Leakage Current VL=350V ILEAK --1A
Switching Speeds
Turn-On IF=5mA, VL=10V ton --3ms
Turn-Off toff --3ms
Output Capacitance VL=50V, f=1MHz COUT -25 -pF
Input Characteristics
Input Control Current to Activate IL=120mA IF--5mA
Input Control Current to Deactivate - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR--5V
Reverse Input Current VR=5V IR--10A
Common Characteristics
Input to Output Capacitance - CI/O -3 -pF
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Phototransistor Blocking Voltage IC=10ABV
CEO 20 50 - V
Phototransistor Dark Current VCE=5V, IF=0mA ICEO - 100 1000 nA
Saturation Voltage IC=0.15mA, IF=0.05mA VSAT - 0.5 0.8 V
Current Transfer Ratio IF=0.05mA, VCE=0.8V CTR 300 1000 - %
Input Characteristics
Input Control Current IC=2mA, VCE=0.5V IF-12mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Input to Output Capacitance - - - 3 - pF
Isolation, Input to Output - VI/O 3750 - - Vrms
Electrical Characteristics @25ºC: Detector Section