DSS 2x111-008A IFAVM = 2x110 A VRRM = 80 V V F = 0.72 V Power Schottky Rectifier Preliminary data VRSM VRRM V V 80 80 miniBLOC, SOT-227 B Type DSS 2x111-008A Symbol Conditions Maximum Ratings IFRMS IFAVM IFAVM TC = 105C; rectangular, d = 0.5 TC = 105C; rectangular, d = 0.5; per device IFSM TVJ = 45C; tp = 10 ms (50 Hz), sine EAS IAR 150 110 220 A A A 1400 A IAS = 14; L = 180 H; TVJ = 25C; non repetitive 19 mJ VA =1.5 * VRRM typ.; f=10 kHz; repetitive 1.4 A tbd V/s -40...+150 150 -40...+150 C C C 310 W 2500 V~ 1.1-1.5/9-13 1.1-1.5/9-13 Nm/lb.in. Nm/lb.in. 30 g (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25C VISOL IISOL 1 mA; 50/60 Hz; t = 1 min Md mounting torque (M4) terminal connection torque (M4) Weight typical Symbol Conditions IR TVJ = 25C; VR = VRRM TVJ = 125C;VR = VRRM VF IF = 100 A; IF = 200 A; Characteristic Values typ. max. TVJ = 125C TVJ = 25C TVJ = 125C RthJC RthCH 8 20 mA mA 0.72 0.84 0.94 V V V 0.4 K/W K/W 0.15 Features * International standard package miniBLOC * Isolation voltage 2500 V~ * UL registered E 72873 * 2 independent Schottky diodes in 1 package * Very low VF * Extremely low switching losses * Low IRM-values Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions see Outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2003 IXYS All rights reserved 345 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified 1-2 http://store.iiic.cc/ DSS 2x111-008A 10000 10000 200 mA 100 TVJ =150C pF 1000 A IR IF CT 125C 100 100C 1000 10 75C 10 TVJ = 150C 125C 25C Note: All curves are per diode. Curves 2 and 5 will follow. 50C 1 25C TVJ= 25 1 0.0 100 0.1 0.2 0.4 0.6 0.8 V 1.0 0 10 20 30 0 40 V 50 VR VF 10 20 30 VR 40 V Fig. 1 Maximum forward voltage drop characteristics 160 130 A 120 110 DC 120 IF(AV) d = 0.5 A I FSM 100 90 W P (AV) 80 d= DC 0.5 0.33 0.25 0.17 0.08 70 80 60 50 40 30 40 20 10 0 0 0 40 80 0 120 C 160 40 80 TC 120 A s I F(AV) tP Fig. 4 Forward power loss characteristics Fig. 3 Average forward current IF(AV) versus case temperature TC 1 K/W Z thJC 0.1 D = 0.5 0.33 0.25 0.17 0.08 Single Pulse 0.01 0.001 DSS2x111-008A 0.01 0.1 1s 10 t IXYS reserves the right to change limits, Conditions and dimensions. (c) 2003 IXYS All rights reserved 345 Fig. 6 Transient thermal impedance junction to case at various duty cycles 2-2 http://store.iiic.cc/