Document Number: 40005 For technical questions, contact: tantalum@vishay.com www.vishay.com
Revision: 23-Feb-09 1
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR
593D
Vishay Sprague
Effective September 2005, new capacitor ratings will not be
added to the 593D series. All new ratings are available in the
TR3 series. The TR3 series offers state-of-the-art low ESR
for switch Mode Power Supplies and DC/DC Converters.
FEATURES
•Terminations: 100 % Matte Tin, standard,
Tin/Lead available
•Compliant terminations
•Molded case available in five case codes
•Compatible with “High Volume” automatic pick
and place equipment
•High ripple current carrying capability
•Low ESR
•Meets IEC Specification QC300801/US0001 and
EIA535BAAC mechanical and performance requirements
PERFORMANCE/ELECTRICAL CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Note: Refer to Doc. 40088
Capacitance Range: 0.47 µF to 680 µF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
100 % Surge Current Tested (B, C, D and E Case Sizes)
Voltage Rating: 4 VDC to 50 VDC
Note:
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Effective July 15, 2008, part numbers with solderable termination codes 2T and 2W may have either matte or tin/lead terminations. Codes 2TE3
and 2WE3 specify only matte tin terminations. Codes 8T and 8W specify only tin/lead terminations.
* Pb containing terminations are not RoHS compliant, exemptions may apply
ORDERING INFORMATION
593D 107 X9 010 D 2WE3
TYPE CAPACITANCE CAPACITANCE
TO L E RA N C E
DC VOLTAGE RATING
AT + 85 °C
CASE CODE TERMINATION AND
PACKAGING
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
This is expressed in volts. To
complete the three-digit block,
zeros precede the voltage rating.
A decimal point is indicated by an
“R” (6R3 = 6.3 V)
See Ratings and
Case Codes Table
2TE3: Matte Tin, 7" (178 mm) reel
2WE3: Matte Tin, 13" (330 mm) reel
8T: Tin/Lead, 7" (178 mm) reel
8W: Tin/Lead, 13" (330 mm) reel
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P TWTH (MIN.)
A 3216-18
0.126 ± 0.008
[3.2 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.047 ± 0.004
[1.2 ± 0.10]
0.028
[0.70]
B 3528-21
0.138 ± 0.008
[3.5 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.028
[0.70]
C 6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D 7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.095 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E 7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.158 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.095 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
L
T MIN.
H
H
WTW
P
593D
Vishay Sprague Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40005
2Revision: 23-Feb-09
RATINGS AND CASE CODES
µF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
0.47 A
0.68 A
1.0 A A A/B B/C
1.5 AB/C B/C
2.2 AA/B B/C C/D
3.3 A A B C C/D
4.7 AA/B A/B B/C CE/D
6.8 A A B C C/D D/E
10 A A A/B/C B/C C C/D D/E
15 A A A/B B/C B/C C/D D/E
22 AA/B A/B/C B/C C/D D D/E
33 A/B A/B B/C B/C/D C/D D/E
47 A/B B/C B/C/D C/D D/E E
68 B/C B/C C/D D D/E
100 B/C B/C/D C/D D/E E
150 B/C/D C/D/E D/E E
220 C/D
D/E
D/E
330 D D/E E
470 D/E E
680 E
MARKING
“A” CASE VOLTAGE CODE
VOLTS CODE
4.0 G
6.3 J
10 A
16 C
20 D
25 E
35 V
50 T
Marking:
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” Case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Call the factory for further explanation.
Capacitance Code,
pF
Indicates
Lead (Pb)-fre
e
Vishay
Sprague
Logo
Polarity Band (+)
Volt age
Code
V104L
“A” Case Size
Date Code
Vishay
Sprague
Logo
Indicates
Lead (Pb)-free
Voltage
Capacitance
µF
Polarity
Band (+)
22 10L
XX 2
“B, C, D, E, V” Case Sizes
Document Number: 40005 For technical questions, contact: tantalum@vishay.com www.vishay.com
Revision: 23-Feb-09 3
593D
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR Vishay Sprague
Notes:
• (1) Tolerance: X0, X9, X5
• (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W
RATINGS AND PART NUMBER REFERENCE
CAPACITANCE
(µF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(µA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
Irms
(A)
4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C
15 A 593D156(1)004A2(2) 0.6 6 1.500 0.22
22 A 593D226(1)004A2(2) 0.9 6 1.500 0.22
33 A 593D336(1)004A2(2) 1.3 6 1.500 0.22
33 B 593D336(1)004B2(2) 1.3 6 0.500 0.41
47 A 593D476(1)004A2(2) 1.9 14 0.800 0.31
47 B 593D476(1)004B2(2) 1.9 6 0.500 0.41
68 B 593D686(1)004B2(2) 2.7 6 0.500 0.41
68 C 593D686(1)004C2(2) 2.7 6 0.275 0.63
100 B 593D107(1)004B2(2) 4.0 8 0.450 0.43
100 C 593D107(1)004C2(2) 4.0 6 0.225 0.66
150 B 593D157(1)004B2(2) 6.0 14 0.500 0.41
150 C 593D157(1)004C2(2) 6.0 12 0.250 0.66
150 D 593D157(1)004D2(2) 6.0 8 0.150 1.00
220 C 593D227(1)004C2(2) 8.8 8 0.200 0.74
220 D 593D227(1)004D2(2) 8.8 8 0.150 1.00
330 D 593D337(1)004D2(2) 13.2 8 0.150 1.00
470 D 593D477(1)004D2(2) 18.8 10 0.125 1.10
470 E 593D477(1)004E2(2) 18.8 10 0.100 1.28
680 E 593D687(1)004E2(2) 27.2 12 0.100 1.28
6.3 VDC AT + 85 °C, 4 VDC AT 125 °C
10 A 593D106(1)6R3A2(2) 0.6 6 2.000 0.19
15 A 593D156(1)6R3A2(2) 0.9 6 2.000 0.19
22 A 593D226(1)6R3A2(2) 1.3 6 2.000 0.19
22 B 593D226(1)6R3B2(2) 1.3 6 0.600 0.38
33 A 593D336(1)6R3A2(2) 2.0 14 0.800 0.31
33 B 593D336(1)6R3B2(2) 2.0 6 0.600 0.38
47 B 593D476(1)6R3B2(2) 2.8 6 0.550 0.39
47 C 593D476(1)6R3C2(2) 2.8 6 0.300 0.61
68 B 593D686(1)6R3B2(2) 4.1 6 0.550 0.39
68 C 593D686(1)6R3C2(2) 4.1 6 0.275 0.63
100 B 593D107(1)6R3B2(2) 6.0 15 0.500 0.41
100 C 593D107(1)6R3C2(2) 6.0 6 0.250 0.66
100 D 593D107(1)6R3D2(2) 6.0 6 0.140 1.04
150 C 593D157(1)6R3C2(2) 9.0 8 0.200 0.74
150 D 593D157(1)6R3D2(2) 9.0 8 0.125 1.10
150 E 593D157(1)6R3E2(2) 9.0 8 0.100 1.28
220 D 593D227(1)6R3D2(2) 13.2 8 0.100 1.22
220 E 593D227(1)6R3E2(2) 13.2 8 0.100 1.28
330 D 593D337(1)6R3D2(2) 19.8 8 0.125 1.10
330 E 593D337(1)6R3E2(2) 19.8 8 0.100 1.28
470 E 593D477(1)6R3E2(2) 28.2 10 0.100 1.28
10 VDC AT + 85 °C, 7 VDC AT 125 °C
4.7 A 593D475(1)010A2(2) 0.5 6 3.000 0.16
6.8 A 593D685(1)010A2(2) 0.7 6 3.000 0.16
10 A 593D106(1)010A2(2) 1.0 6 2.000 0.19
15 A 593D156(1)010A2(2) 1.5 6 2.000 0.19
15 B 593D156(1)010B2(2) 1.5 6 0.700 0.35
22 A 593D226(1)010A2(2) 2.2 8 1.500 0.22
22 B 593D226(1)010B2(2) 2.2 6 0.700 0.35
22 C 593D226(1)010C2(2) 2.2 6 0.345 0.56
33 B 593D336(1)010B2(2) 3.3 6 0.600 0.38
33 C 593D336(1)010C2(2) 3.3 6 0.300 0.61
593D
Vishay Sprague Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR
www.vishay.com For technical questions, contact: tantalum@vishay.com Document Number: 40005
4Revision: 23-Feb-09
Notes:
• (1) Tolerance: X0, X9, X5
• (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W
RATINGS AND PART NUMBER REFERENCE
CAPACITANCE
(µF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(µA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
Irms
(A)
10 VDC AT + 85 °C, 7 VDC AT 125 °C
47 B 593D476(1)010B2(2) 4.7 6 0.600 0.38
47 C 593D476(1)010C2(2) 4.7 6 0.300 0.61
47 D 593D476(1)010D2(2) 4.7 6 0.200 0.87
68 C 593D686(1)010C2(2) 6.8 6 0.275 0.63
68 D 593D686(1)010D2(2) 6.8 6 0.150 1.00
100 C 593D107(1)010C2(2) 10.0 8 0.200 0.74
100 D 593D107(1)010D2(2) 10.0 6 0.100 1.22
150 D 593D157(1)010D2(2) 15.0 8 0.100 1.22
150 E 593D157(1)010E2(2) 15.0 8 0.100 1.28
220 D 593D227(1)010D2(2) 22.0 8 0.125 1.10
220 E 593D227(1)010E2(2) 22.0 8 0.100 1.28
330 E 593D337(1)010E2(2) 33.0 10 0.100 1.28
16 VDC AT + 85 °C, 10 VDC AT + 125 °C
3.3 A 593D335(1)016A2(2) 0.5 6 3.500 0.15
4.7 A 593D475(1)016A2(2) 0.8 6 2.500 0.17
4.7 B 593D475(1)016B2(2) 0.8 6 1.500 0.24
6.8 A 593D685(1)016A2(2) 1.1 6 3.000 0.16
10 A 593D106(1)016A2(2) 1.6 6 1.700 0.21
10 B 593D106(1)016B2(2) 1.6 6 0.800 0.33
10 C 593D106(1)016C2(2) 1.6 6 0.450 0.49
15 B 593D156(1)016B2(2) 2.4 6 0.800 0.33
15 C 593D156(1)016C2(2) 2.4 6 0.400 0.52
22 B 593D226(1)016B2(2) 3.5 6 0.700 0.35
22 C 593D226(1)016C2(2) 3.5 6 0.350 0.56
33 B 593D336X0016B2(2) 5.3 6 0.700 0.35
33 C 593D336(1)016C2(2) 5.3 6 0.300 0.61
33 D 593D336(1)016D2(2) 4.2 4 0.225 0.82
47 C 593D476(1)016C2(2) 7.5 6 0.300 0.61
47 D 593D476(1)016D2(2) 7.5 6 0.150 1.00
68 D 593D686(1)016D2(2) 10.9 6 0.150 1.00
100 D 593D107(1)016D2(2) 16.0 8 0.125 1.10
100 E 593D107(1)016E2(2) 16.0 8 0.100 1.28
150 E 593D157(1)016E2(2) 24.0 8 0.100 1.28
20 VDC AT + 85 °C, 13 VDC AT + 125 °C
1.0 A 593D105(1)020A2(2) 0.5 4 5.500 0.12
2.2 A 593D225(1)020A2(2) 0.5 6 4.000 0.14
3.3 A 593D335(1)020A2(2) 0.7 6 4.000 0.14
4.7 A 593D475(1)020A2(2) 0.9 6 3.500 0.15
4.7 B 593D475(1)020B2(2) 0.9 6 1.000 0.29
6.8 B 593D685(1)020B2(2) 1.4 6 1.000 0.29
10 B 593D106(1)020B2(2) 2.0 6 1.000 0.29
10 C 593D106(1)020C2(2) 2.0 6 0.450 0.49
15 B 593D156(1)020B2(2) 3.0 6 1.000 0.29
15 C 593D156(1)020C2(2) 3.0 6 0.400 0.52
22 C 593D226(1)020C2(2) 4.4 6 0.375 0.54
22 D 593D226(1)020D2(2) 3.5 4 0.225 0.82
33 C 593D336(1)020C2(2) 6.6 6 0.350 0.56
33 D 593D336(1)020D2(2) 6.6 6 0.200 0.87
47 D 593D476(1)020D2(2) 9.4 6 0.200 0.87
47 E 593D476(1)020E2(2) 7.5 4 0.150 1.05
68 D 593D686(1)020D2(2) 13.6 6 0.175 0.93
68 E 593D686(1)020E2(2) 13.6 6 0.150 1.05
100 E 593D107(1)020E2(2) 20.0 8 0.150 1.05
Document Number: 40005 For technical questions, contact: tantalum@vishay.com www.vishay.com
Revision: 23-Feb-09 5
593D
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR Vishay Sprague
Notes:
• (1) Tolerance: X0, X9, X5
• (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W
RATINGS AND PART NUMBER REFERENCE
CAPACITANCE
(µF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(µA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
Irms
(A)
25 VDC AT + 85 °C, 17 VDC AT + 125 °C
1.0 A 593D105(1)025A2(2) 0.5 4 4.000 0.14
1.5 A 593D155(1)025A2(2) 0.5 6 4.000 0.14
2.2 A 593D225(1)025A2(2) 0.6 6 4.000 0.14
2.2 B 593D225(1)025B2(2) 0.6 6 1.500 0.24
3.3 B 593D335(1)025B2(2) 0.8 6 1.500 0.24
4.7 B 593D475(1)025B2(2) 1.2 6 1.500 0.24
4.7 C 593D475(1)025C2(2) 1.2 6 0.525 0.46
6.8 C 593D685(1)025C2(2) 1.7 6 0.500 0.47
10 C 593D106(1)025C2(2) 2.5 6 0.450 0.49
15 C 593D156(1)025C2(2) 3.8 6 0.425 0.51
15 D 593D156(1)025D2(2) 3.8 6 0.250 0.77
22 D 593D226(1)025D2(2) 5.5 6 0.200 0.87
33 D 593D336(1)025D2(2) 8.3 6 0.200 0.87
33 E 593D336(1)025E2(2) 8.3 6 0.200 0.91
47 E 593D476(1)025E2(2) 11.8 6 0.200 0.91
35 VDC AT + 85 °C, 23 VDC AT + 125 °C
0.47 A 593D474(1)035A2(2) 0.5 4 4.000 0.14
0.68 A 593D684(1)035A2(2) 0.5 4 4.000 0.14
1.0 A 593D105(1)035A2(2) 0.5 4 4.000 0.14
1.0 B 593D105(1)035B2(2) 0.5 4 2.000 0.21
1.5 B 593D155(1)035B2(2) 0.5 6 2.000 0.21
1.5 C 593D155(1)035C2(2) 0.5 6 0.900 0.35
2.2 B 593D225(1)035B2(2) 0.8 6 2.000 0.21
2.2 C 593D225(1)035C2(2) 0.8 6 0.900 0.40
3.3 C 593D335(1)035C2(2) 1.2 6 0.700 0.45
4.7 C 593D475(1)035C2(2) 1.6 6 0.500 0.47
6.8 C 593D685(1)035C2(2) 2.4 6 0.475 0.48
6.8 D 593D685(1)035D2(2) 2.4 6 0.300 0.71
10 C 593D106(1)035C2(2) 3.5 6 0.450 0.49
10 D 593D106(1)035D2(2) 3.5 6 0.300 0.71
15 D 593D156(1)035D2(2) 5.3 6 0.300 0.71
15 E 593D156(1)035E2(2) 5.3 6 0.300 0.74
22 D 593D226(1)035D2(2) 7.7 6 0.300 0.71
22 E 593D226(1)035E2(2) 7.7 6 0.275 0.77
50 VDC AT + 85 °C, 33 VDC AT + 125 °C
1.0 B 593D105(1)050B2(2) 0.5 4 2.000 0.21
1.0 C 593D105(1)050C2(2) 0.5 4 1.600 0.26
1.5 B 593D155(1)050B2(2) 0.8 6 2.000 0.21
1.5 C 593D155(1)050C2(2) 0.8 6 1.500 0.27
2.2 C 593D225(1)050C2(2) 1.1 6 1.500 0.27
2.2 D 593D225(1)050D2(2) 1.1 6 0.800 0.43
3.3 C 593D335(1)050C2(2) 1.7 6 1.500 0.27
3.3 D 593D335(1)050D2(2) 1.7 6 0.800 0.43
4.7 D 593D475(1)050D2(2) 2.4 6 0.600 0.50
4.7 E 593D475(1)050E2(2) 1.9 6 0.600 0.50
6.8 D 593D685(1)050D2(2) 3.4 6 0.600 0.50
6.8 E 593D685(1)050E2(2) 3.4 6 0.550 0.55
10 D 593D106(1)050D2(2) 5.0 6 0.550 0.52
10 E 593D106(1)050E2(2) 5.0 6 0.550 0.55
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
