LPC-100-700 - MEAN WELL ENTERPRISES

Constant current design

Universal AC input/full rauge

Withstand 300VAC surge input for 5 seconds

High efficiency up to 90%

Protections: Short circuit / Over voltage

Cooling by free air convection

Fully encapsulated with IP67 level (Note.6)

Fully isolated plastic case

Class power unit, no FGⅡ

100% full load burn in test-

Low cost, high reliability

2 years warranty (Note.4)

100W Single Output LED Power Supply LPC-100 series

File Name:LPC-100-SPEC 2018-09-30

■Description

■Features ■Applications

■Model Encoding

- 700

LPC -100

Output current

Output wattage

Series name

Suitable for LED related

fixture or appliance

(such as LED Decoration

or Advertisement devices)

LPC-100 series is one 100W single output AC/DC LED switching power supply. It features the

constant current design, providing various models with the output current ranging from 350mA

through 2100mA the LED lighting applications employ the most frequently.

LPC-100 operates for the range 90~264VAC so it can perfectly work for most of the countries in

the world. The whole series is based on class II (without FG pin) design, housed with a 94V-0

flame retardant plastic case. With the working efficiency up to 90%, LPC-100 can work at the

ambient temperature between -25 ~+50 under air convection.℃℃

IP67

350mA

LPC-100-350 LPC-100-500 LPC-100-700

LPC-100-1050

LPC-100-1400

LPC-100-1750

LPC-100-2100

500mA 700mA 1050mA 1750mA 2100mA

1400mA

100W

100 ~ 200V

100.1W

72 ~ 143V

100.8W

48 ~ 96V

100.8W

36 ~ 72V

101.5W

29 ~ 58V

100.8W

24 ~ 48V

1.5Vp-p 1Vp-p 1Vp-p 1Vp-p 1Vp-p 1Vp-p

220 ~ 240V 160 ~ 172V 108 ~ 120V 80 ~ 97V 65 ~ 80V 58 ~ 68V

IP67 approved,Design refer to TUV EN60950-1EAC TP TC 004,

16ms/230VAC 10ms/115vac at full load

1000ms, 80ms / 230VAC 2000ms,80ms/115VAC at full load

90 ~ 264VAC 127VDC ~ 370VDC

VOLTAGE TOLERANCE ±1.5%

SPECIFICATION

MODEL

RATED CURRENT

RATED POWER

OUTPUT

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.2

FREQUENCY RANGE

EFFICIENCY (Typ.)

AC CURRENT (Typ.)

INPUT INRUSH CURRENT (Typ.)

LEAKAGE CURRENT

SAFETY STANDARDS

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

OVER VOLTAGE

47 ~ 63Hz

2.2 A / 115VAC 1.2A / 230VAC

<0.25mA / 240VAC

-25 ~ +50 (Refer to "Derating Curve")℃

10 ~ 95% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±0.03%/ (0 ~ 50 )℃℃

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

RIPPLE CURRENT

ENVIRONMENT

SAFETY &

EMC

PROTECTION

315 ~ 345V

Protection type : Shut down and latch off o/p voltage re-power on to recovery

SHORT CIRCUIT

90% 89.5% 89%

±5%

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

2. Derating may be needed under low input voltages. Please check the static characteristics for more details.

3. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

4. Refer to warranty statement.

5. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please

reconfirm special electrical requirements for some specific system design.

6. Suitable for indoor use or outdoor use without direct sunlight exposure, please avoid immerse in the water over 30minutes.

7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.

8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

9. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level , criteria A, EAC TP TC 020

100.1W

143 ~ 286V

I/P-O/P:3KVAC

I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

100W Single Output LED Power Supply LPC-100 series

File Name:LPC-100-SPEC 2018-09-30

EMC IMMUNITY

EMC EMISSION

CURRENT ACCURACY ±5.0%

Compliance to EN55032(CISPR32) Class B; EN61000-3-2 Class A( 80% load); EN61000-3-3, EAC TP TC 020≦

CONSTANT CURRENT REGION Note.5

RIPPLE & NOISE

1.5Vp-p

511Khrs min. MIL-HDBK-217F (25 )℃

190*52*37mm (L*W*H)

0.61Kg;20pcs/13.2Kg/0.55CUFT

LINE REGULATION ±1%

COLD START 75A(twidth=980 s measured at 50% Ipeak) at 230VACμ

Hiccup mode, recovers automatically after fault condition is removed

MAX. No. of PSUs on 16A

CIRCUIT BREAKER 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC

Mechanical Specification

File Name:LPC-100-SPEC 2018-09-30

PWM

O.L.P.

EMI FILTER

RECTIFIERS

POWER

SWITCHING FILTER

RECTIFIERS +V

-V

I/P

CONTROL

Block Diagram

DETECTION

CIRCUIT

O.V.P.

AC/N(Blue)

AC/L(Brown)

100

INPUT VOLTAGE (V) 60Hz

90 100 125 135 145 155 165 175 180 200 230 264

100

Derating CurveDerating Curve Static Characteristics

AMBIENT TEMPERATURE ( )℃

LOAD (%)

175

LOAD (%)

(HORIZONTAL)

-15 0 15 30

04050-25 60 70

Case No. LPC-100 Unit:mm

+V(Red)

-V(Black)

UL 1015 18AWG

Recommend Mounting Direction

100W Single Output LED Power Supply LPC-100 series

190

3.5

300±10 300±10

2.5

Tcase

※T case: Max. Case Temperature.

fosc : 67KHz