S-1313A15-A4T1U3 - Ablic

S-1313 Series

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

www.ablic.com

1

The S-1313 Series, developed by using the CMOS technology, is a positive voltage regulator IC which has the super low

current consumption and the low dropout voltage.

Current consumption is as low as 0.9 μA typ., and a ceramic capacitor of 0.1 μF or more can be used as the input and output

capacitors.

It also has high-accuracy output voltage of ±1.0%.

 Features

• Output voltage: 1.0 V to 3.5 V, selectable in 0.05 V step.

• Input voltage: 1.5 V to 5.5 V

• Output voltage accuracy: ±1.0% (1.0 V to 1.45 V output product: ±15 mV)

• Dropout voltage: 170 mV typ. (2.8 V output product, IOUT = 100 mA)

• Current consumption: During operation: 0.9 μA typ., 1.35 μA max.

During power-off: 0.01 μA typ., 0.1 μA max.

• Output current: Possible to output 200 mA (VOUT(S) ≥ 1.4 V, VIN ≥ VOUT(S) + 1.0 V)*1

• Input and output capacitors: A ceramic capacitor of 0.1 μF or more can be used.

• Built-in overcurrent protection circuit: Limits overcurrent of output transistor.

• Built-in thermal shutdown circuit: Prevents damage caused by heat.

• Built-in ON / OFF circuit: Ensures long battery life.

Discharge shunt function "available" / "unavailable" is selectable.

Pull-down function "available" / "unavailable" is selectable.

• Operation temperature range: Ta = −40°C to +85°C

• Lead-free (Sn 100%), halogen-free

*1. Attention should be paid to the power dissipation of the package when the output current is large.

 Applications

• Constant-voltage power supply for portable communication device, digital camera, and digital audio player

• Constant-voltage power supply for battery-powered device

• Constant-voltage power supply for home electric appliance

 Packages

• SOT-23-5

• SC-82AB

• HSNT-4 (1010)

• HSNT-4 (0808)

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

2

 Block Diagrams

1. S-1313 Series A type

VSS

ON / OFF

VIN VOUT

*1

ON / OFF circuit

Reference

voltage circuit

+

−

Overcurrent

protection circuit

Thermal shutdown circuit

*1. Parasitic diode

Function Status

ON / OFF logic Active "H"

Discharge shunt

function Available

Constant current

source pull-down Available

Figure 1

2. S-1313 Series B type

VSS

ON / OFF

VIN VOUT

*1

ON / OFF circuit

Reference

voltage circuit

+

−

Overcurrent

protection circuit

Thermal shutdown circuit

*1. Parasitic diode

Function Status

ON / OFF logic Active "H"

Discharge shunt

function Available

Constant current

source pull-down Unavailable

Figure 2

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

3

3. S-1313 Series C type

VSS

ON / OFF

VIN VOUT

*1

ON / OFF circuit

Reference

voltage circuit

+

−

Overcurrent

protection circuit

Thermal shutdown circuit

*1. Parasitic diode

Function Status

ON / OFF logic Active "H"

Discharge shunt

function Unavailable

Constant current

source pull-down Available

Figure 3

4. S-1313 Series D type

VSS

ON / OFF

VIN VOUT

*1

ON / OFF circuit

Reference

voltage circuit

+

−

Overcurrent

protection circuit

Thermal shutdown circuit

*1. Parasitic diode

Function Status

ON / OFF logic Active "H"

Discharge shunt

function Unavailable

Constant current

source pull-down Unavailable

Figure 4

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

4

 Product Name Structure

Users can select the product type, output voltage, and package type for the S-1313 Series. Refer to "1. Product

name" regarding the contents of product name, "2. Function list of product type" regarding the product type,

"3. Packages" regarding the package drawings, "4. Product name list" regarding details of the product name.

1. Product name

S-1313 x xx - xxxx U 3

Product type*3

A to D

Package abbreviation and IC packing specifications*1

M5T1: SOT-23-5, Tape

N4T1: SC-82AB, Tape

A4T2: HSNT-4 (1010), Tape

A4T1: HSNT-4 (0808), Tape

Output voltage*2

10 to 35

(e.g., when the output voltage is 1.0 V, it is expressed as 10.)

Environmental code

U: Lead-free (Sn 100%), halogen-free

*1. Refer to the tape drawing.

*2. If you request the product which has 0.05 V step, contact our sales office.

*3. Refer to "2. Function list of product type".

2. Function list of product type

Table 1

Product Type ON / OFF Logic Discharge Shunt Function Constant Current Source Pull-down

A Active "H" Available Available

B Active "H" Available Unavailable

C Active "H" Unavailable Available

D Active "H" Unavailable Unavailable

3. Packages

Table 2 Package Drawing Codes

Package Name Dimension Tape Reel Land

SOT-23-5 MP005-A-P-SD MP005-A-C-SD MP005-A-R-SD −

SC-82AB NP004-A-P-SD NP004-A-C-SD

NP004-A-C-S1 NP004-A-R-SD −

HSNT-4 (1010) PL004-A-P-SD PL004-A-C-SD PL004-A-R-SD PL004-A-L-SD

HSNT-4 (0808) PK004-A-P-SD PK004-A-C-SD PK004-A-R-SD PK004-A-L-SD

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

5

4. Product name list

4. 1 S-1313 Series A type

ON / OFF logic: Active "H"

Discharge shunt function: Available Constant current source pull-down: Available

Table 3

Output Voltage SOT-23-5 SC-82AB HSNT-4 (1010) HSNT-4 (0808)

1.0 V ± 15 mV S-1313A10-M5T1U3 S-1313A10-N4T1U3 S-1313A10-A4T2U3 S-1313A10-A4T1U3

1.1 V ± 15 mV S-1313A11-M5T1U3 S-1313A11-N4T1U3 S-1313A11-A4T2U3 S-1313A11-A4T1U3

1.2 V ± 15 mV S-1313A12-M5T1U3 S-1313A12-N4T1U3 S-1313A12-A4T2U3 S-1313A12-A4T1U3

1.3 V ± 15 mV S-1313A13-M5T1U3 S-1313A13-N4T1U3 S-1313A13-A4T2U3 S-1313A13-A4T1U3

1.4 V ± 15 mV S-1313A14-M5T1U3 S-1313A14-N4T1U3 S-1313A14-A4T2U3 S-1313A14-A4T1U3

1.5 V ± 1.0% S-1313A15-M5T1U3 S-1313A15-N4T1U3 S-1313A15-A4T2U3 S-1313A15-A4T1U3

1.6 V ± 1.0% S-1313A16-M5T1U3 S-1313A16-N4T1U3 S-1313A16-A4T2U3 S-1313A16-A4T1U3

1.7 V ± 1.0% S-1313A17-M5T1U3 S-1313A17-N4T1U3 S-1313A17-A4T2U3 S-1313A17-A4T1U3

1.8 V ± 1.0% S-1313A18-M5T1U3 S-1313A18-N4T1U3 S-1313A18-A4T2U3 S-1313A18-A4T1U3

1.85 V ± 1.0% S-1313A1J-M5T1U3 S-1313A1J-N4T1U3 S-1313A1J-A4T2U3 S-1313A1J-A4T1U3

1.9 V ± 1.0% S-1313A19-M5T1U3 S-1313A19-N4T1U3 S-1313A19-A4T2U3 S-1313A19-A4T1U3

2.0 V ± 1.0% S-1313A20-M5T1U3 S-1313A20-N4T1U3 S-1313A20-A4T2U3 S-1313A20-A4T1U3

2.1 V ± 1.0% S-1313A21-M5T1U3 S-1313A21-N4T1U3 S-1313A21-A4T2U3 S-1313A21-A4T1U3

2.2 V ± 1.0% S-1313A22-M5T1U3 S-1313A22-N4T1U3 S-1313A22-A4T2U3 S-1313A22-A4T1U3

2.3 V ± 1.0% S-1313A23-M5T1U3 S-1313A23-N4T1U3 S-1313A23-A4T2U3 S-1313A23-A4T1U3

2.4 V ± 1.0% S-1313A24-M5T1U3 S-1313A24-N4T1U3 S-1313A24-A4T2U3 S-1313A24-A4T1U3

2.5 V ± 1.0% S-1313A25-M5T1U3 S-1313A25-N4T1U3 S-1313A25-A4T2U3 S-1313A25-A4T1U3

2.6 V ± 1.0% S-1313A26-M5T1U3 S-1313A26-N4T1U3 S-1313A26-A4T2U3 S-1313A26-A4T1U3

2.7 V ± 1.0% S-1313A27-M5T1U3 S-1313A27-N4T1U3 S-1313A27-A4T2U3 S-1313A27-A4T1U3

2.8 V ± 1.0% S-1313A28-M5T1U3 S-1313A28-N4T1U3 S-1313A28-A4T2U3 S-1313A28-A4T1U3

2.85 V ± 1.0% S-1313A2J-M5T1U3 S-1313A2J-N4T1U3 S-1313A2J-A4T2U3 S-1313A2J-A4T1U3

2.9 V ± 1.0% S-1313A29-M5T1U3 S-1313A29-N4T1U3 S-1313A29-A4T2U3 S-1313A29-A4T1U3

3.0 V ± 1.0% S-1313A30-M5T1U3 S-1313A30-N4T1U3 S-1313A30-A4T2U3 S-1313A30-A4T1U3

3.1 V ± 1.0% S-1313A31-M5T1U3 S-1313A31-N4T1U3 S-1313A31-A4T2U3 S-1313A31-A4T1U3

3.2 V ± 1.0% S-1313A32-M5T1U3 S-1313A32-N4T1U3 S-1313A32-A4T2U3 S-1313A32-A4T1U3

3.3 V ± 1.0% S-1313A33-M5T1U3 S-1313A33-N4T1U3 S-1313A33-A4T2U3 S-1313A33-A4T1U3

3.4 V ± 1.0% S-1313A34-M5T1U3 S-1313A34-N4T1U3 S-1313A34-A4T2U3 S-1313A34-A4T1U3

3.5 V ± 1.0% S-1313A35-M5T1U3 S-1313A35-N4T1U3 S-1313A35-A4T2U3 S-1313A35-A4T1U3

Remark Please contact our sales office for products other than the above.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

6

4. 2 S-1313 Series B type

ON / OFF logic: Active "H"

Discharge shunt function: Available Constant current source pull-down: Unavailable

Table 4

Output Voltage SOT-23-5 SC-82AB HSNT-4 (1010) HSNT-4 (0808)

1.0 V ± 15 mV S-1313B10-M5T1U3 S-1313B10-N4T1U3 S-1313B10-A4T2U3 S-1313B10-A4T1U3

1.1 V ± 15 mV S-1313B11-M5T1U3 S-1313B11-N4T1U3 S-1313B11-A4T2U3 S-1313B11-A4T1U3

1.2 V ± 15 mV S-1313B12-M5T1U3 S-1313B12-N4T1U3 S-1313B12-A4T2U3 S-1313B12-A4T1U3

1.3 V ± 15 mV S-1313B13-M5T1U3 S-1313B13-N4T1U3 S-1313B13-A4T2U3 S-1313B13-A4T1U3

1.4 V ± 15 mV S-1313B14-M5T1U3 S-1313B14-N4T1U3 S-1313B14-A4T2U3 S-1313B14-A4T1U3

1.5 V ± 1.0% S-1313B15-M5T1U3 S-1313B15-N4T1U3 S-1313B15-A4T2U3 S-1313B15-A4T1U3

1.6 V ± 1.0% S-1313B16-M5T1U3 S-1313B16-N4T1U3 S-1313B16-A4T2U3 S-1313B16-A4T1U3

1.7 V ± 1.0% S-1313B17-M5T1U3 S-1313B17-N4T1U3 S-1313B17-A4T2U3 S-1313B17-A4T1U3

1.8 V ± 1.0% S-1313B18-M5T1U3 S-1313B18-N4T1U3 S-1313B18-A4T2U3 S-1313B18-A4T1U3

1.85 V ± 1.0% S-1313B1J-M5T1U3 S-1313B1J-N4T1U3 S-1313B1J-A4T2U3 S-1313B1J-A4T1U3

1.9 V ± 1.0% S-1313B19-M5T1U3 S-1313B19-N4T1U3 S-1313B19-A4T2U3 S-1313B19-A4T1U3

2.0 V ± 1.0% S-1313B20-M5T1U3 S-1313B20-N4T1U3 S-1313B20-A4T2U3 S-1313B20-A4T1U3

2.1 V ± 1.0% S-1313B21-M5T1U3 S-1313B21-N4T1U3 S-1313B21-A4T2U3 S-1313B21-A4T1U3

2.2 V ± 1.0% S-1313B22-M5T1U3 S-1313B22-N4T1U3 S-1313B22-A4T2U3 S-1313B22-A4T1U3

2.3 V ± 1.0% S-1313B23-M5T1U3 S-1313B23-N4T1U3 S-1313B23-A4T2U3 S-1313B23-A4T1U3

2.4 V ± 1.0% S-1313B24-M5T1U3 S-1313B24-N4T1U3 S-1313B24-A4T2U3 S-1313B24-A4T1U3

2.5 V ± 1.0% S-1313B25-M5T1U3 S-1313B25-N4T1U3 S-1313B25-A4T2U3 S-1313B25-A4T1U3

2.6 V ± 1.0% S-1313B26-M5T1U3 S-1313B26-N4T1U3 S-1313B26-A4T2U3 S-1313B26-A4T1U3

2.7 V ± 1.0% S-1313B27-M5T1U3 S-1313B27-N4T1U3 S-1313B27-A4T2U3 S-1313B27-A4T1U3

2.8 V ± 1.0% S-1313B28-M5T1U3 S-1313B28-N4T1U3 S-1313B28-A4T2U3 S-1313B28-A4T1U3

2.85 V ± 1.0% S-1313B2J-M5T1U3 S-1313B2J-N4T1U3 S-1313B2J-A4T2U3 S-1313B2J-A4T1U3

2.9 V ± 1.0% S-1313B29-M5T1U3 S-1313B29-N4T1U3 S-1313B29-A4T2U3 S-1313B29-A4T1U3

3.0 V ± 1.0% S-1313B30-M5T1U3 S-1313B30-N4T1U3 S-1313B30-A4T2U3 S-1313B30-A4T1U3

3.1 V ± 1.0% S-1313B31-M5T1U3 S-1313B31-N4T1U3 S-1313B31-A4T2U3 S-1313B31-A4T1U3

3.2 V ± 1.0% S-1313B32-M5T1U3 S-1313B32-N4T1U3 S-1313B32-A4T2U3 S-1313B32-A4T1U3

3.3 V ± 1.0% S-1313B33-M5T1U3 S-1313B33-N4T1U3 S-1313B33-A4T2U3 S-1313B33-A4T1U3

3.4 V ± 1.0% S-1313B34-M5T1U3 S-1313B34-N4T1U3 S-1313B34-A4T2U3 S-1313B34-A4T1U3

3.5 V ± 1.0% S-1313B35-M5T1U3 S-1313B35-N4T1U3 S-1313B35-A4T2U3 S-1313B35-A4T1U3

Remark Please contact our sales office for products other than the above.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

7

4. 3 S-1313 Series C type

ON / OFF logic: Active "H"

Discharge shunt function: Unavailable Constant current source pull-down: Available

Table 5

Output Voltage SOT-23-5 SC-82AB HSNT-4 (1010) HSNT-4 (0808)

1.0 V ± 15 mV S-1313C10-M5T1U3 S-1313C10-N4T1U3 S-1313C10-A4T2U3 S-1313C10-A4T1U3

1.1 V ± 15 mV S-1313C11-M5T1U3 S-1313C11-N4T1U3 S-1313C11-A4T2U3 S-1313C11-A4T1U3

1.2 V ± 15 mV S-1313C12-M5T1U3 S-1313C12-N4T1U3 S-1313C12-A4T2U3 S-1313C12-A4T1U3

1.3 V ± 15 mV S-1313C13-M5T1U3 S-1313C13-N4T1U3 S-1313C13-A4T2U3 S-1313C13-A4T1U3

1.4 V ± 15 mV S-1313C14-M5T1U3 S-1313C14-N4T1U3 S-1313C14-A4T2U3 S-1313C14-A4T1U3

1.5 V ± 1.0% S-1313C15-M5T1U3 S-1313C15-N4T1U3 S-1313C15-A4T2U3 S-1313C15-A4T1U3

1.6 V ± 1.0% S-1313C16-M5T1U3 S-1313C16-N4T1U3 S-1313C16-A4T2U3 S-1313C16-A4T1U3

1.7 V ± 1.0% S-1313C17-M5T1U3 S-1313C17-N4T1U3 S-1313C17-A4T2U3 S-1313C17-A4T1U3

1.8 V ± 1.0% S-1313C18-M5T1U3 S-1313C18-N4T1U3 S-1313C18-A4T2U3 S-1313C18-A4T1U3

1.85 V ± 1.0% S-1313C1J-M5T1U3 S-1313C1J-N4T1U3 S-1313C1J-A4T2U3 S-1313C1J-A4T1U3

1.9 V ± 1.0% S-1313C19-M5T1U3 S-1313C19-N4T1U3 S-1313C19-A4T2U3 S-1313C19-A4T1U3

2.0 V ± 1.0% S-1313C20-M5T1U3 S-1313C20-N4T1U3 S-1313C20-A4T2U3 S-1313C20-A4T1U3

2.1 V ± 1.0% S-1313C21-M5T1U3 S-1313C21-N4T1U3 S-1313C21-A4T2U3 S-1313C21-A4T1U3

2.2 V ± 1.0% S-1313C22-M5T1U3 S-1313C22-N4T1U3 S-1313C22-A4T2U3 S-1313C22-A4T1U3

2.3 V ± 1.0% S-1313C23-M5T1U3 S-1313C23-N4T1U3 S-1313C23-A4T2U3 S-1313C23-A4T1U3

2.4 V ± 1.0% S-1313C24-M5T1U3 S-1313C24-N4T1U3 S-1313C24-A4T2U3 S-1313C24-A4T1U3

2.5 V ± 1.0% S-1313C25-M5T1U3 S-1313C25-N4T1U3 S-1313C25-A4T2U3 S-1313C25-A4T1U3

2.6 V ± 1.0% S-1313C26-M5T1U3 S-1313C26-N4T1U3 S-1313C26-A4T2U3 S-1313C26-A4T1U3

2.7 V ± 1.0% S-1313C27-M5T1U3 S-1313C27-N4T1U3 S-1313C27-A4T2U3 S-1313C27-A4T1U3

2.8 V ± 1.0% S-1313C28-M5T1U3 S-1313C28-N4T1U3 S-1313C28-A4T2U3 S-1313C28-A4T1U3

2.85 V ± 1.0% S-1313C2J-M5T1U3 S-1313C2J-N4T1U3 S-1313C2J-A4T2U3 S-1313C2J-A4T1U3

2.9 V ± 1.0% S-1313C29-M5T1U3 S-1313C29-N4T1U3 S-1313C29-A4T2U3 S-1313C29-A4T1U3

3.0 V ± 1.0% S-1313C30-M5T1U3 S-1313C30-N4T1U3 S-1313C30-A4T2U3 S-1313C30-A4T1U3

3.1 V ± 1.0% S-1313C31-M5T1U3 S-1313C31-N4T1U3 S-1313C31-A4T2U3 S-1313C31-A4T1U3

3.2 V ± 1.0% S-1313C32-M5T1U3 S-1313C32-N4T1U3 S-1313C32-A4T2U3 S-1313C32-A4T1U3

3.3 V ± 1.0% S-1313C33-M5T1U3 S-1313C33-N4T1U3 S-1313C33-A4T2U3 S-1313C33-A4T1U3

3.4 V ± 1.0% S-1313C34-M5T1U3 S-1313C34-N4T1U3 S-1313C34-A4T2U3 S-1313C34-A4T1U3

3.5 V ± 1.0% S-1313C35-M5T1U3 S-1313C35-N4T1U3 S-1313C35-A4T2U3 S-1313C35-A4T1U3

Remark Please contact our sales office for products other than the above.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

8

4. 4 S-1313 Series D type

ON / OFF logic: Active "H"

Discharge shunt function: Unavailable Constant current source pull-down: Unavailable

Table 6

Output Voltage SOT-23-5 SC-82AB HSNT-4 (1010) HSNT-4 (0808)

1.0 V ± 15 mV S-1313D10-M5T1U3 S-1313D10-N4T1U3 S-1313D10-A4T2U3 S-1313D10-A4T1U3

1.1 V ± 15 mV S-1313D11-M5T1U3 S-1313D11-N4T1U3 S-1313D11-A4T2U3 S-1313D11-A4T1U3

1.2 V ± 15 mV S-1313D12-M5T1U3 S-1313D12-N4T1U3 S-1313D12-A4T2U3 S-1313D12-A4T1U3

1.3 V ± 15 mV S-1313D13-M5T1U3 S-1313D13-N4T1U3 S-1313D13-A4T2U3 S-1313D13-A4T1U3

1.4 V ± 15 mV S-1313D14-M5T1U3 S-1313D14-N4T1U3 S-1313D14-A4T2U3 S-1313D14-A4T1U3

1.5 V ± 1.0% S-1313D15-M5T1U3 S-1313D15-N4T1U3 S-1313D15-A4T2U3 S-1313D15-A4T1U3

1.6 V ± 1.0% S-1313D16-M5T1U3 S-1313D16-N4T1U3 S-1313D16-A4T2U3 S-1313D16-A4T1U3

1.7 V ± 1.0% S-1313D17-M5T1U3 S-1313D17-N4T1U3 S-1313D17-A4T2U3 S-1313D17-A4T1U3

1.8 V ± 1.0% S-1313D18-M5T1U3 S-1313D18-N4T1U3 S-1313D18-A4T2U3 S-1313D18-A4T1U3

1.85 V ± 1.0% S-1313D1J-M5T1U3 S-1313D1J-N4T1U3 S-1313D1J-A4T2U3 S-1313D1J-A4T1U3

1.9 V ± 1.0% S-1313D19-M5T1U3 S-1313D19-N4T1U3 S-1313D19-A4T2U3 S-1313D19-A4T1U3

2.0 V ± 1.0% S-1313D20-M5T1U3 S-1313D20-N4T1U3 S-1313D20-A4T2U3 S-1313D20-A4T1U3

2.1 V ± 1.0% S-1313D21-M5T1U3 S-1313D21-N4T1U3 S-1313D21-A4T2U3 S-1313D21-A4T1U3

2.2 V ± 1.0% S-1313D22-M5T1U3 S-1313D22-N4T1U3 S-1313D22-A4T2U3 S-1313D22-A4T1U3

2.3 V ± 1.0% S-1313D23-M5T1U3 S-1313D23-N4T1U3 S-1313D23-A4T2U3 S-1313D23-A4T1U3

2.4 V ± 1.0% S-1313D24-M5T1U3 S-1313D24-N4T1U3 S-1313D24-A4T2U3 S-1313D24-A4T1U3

2.5 V ± 1.0% S-1313D25-M5T1U3 S-1313D25-N4T1U3 S-1313D25-A4T2U3 S-1313D25-A4T1U3

2.6 V ± 1.0% S-1313D26-M5T1U3 S-1313D26-N4T1U3 S-1313D26-A4T2U3 S-1313D26-A4T1U3

2.7 V ± 1.0% S-1313D27-M5T1U3 S-1313D27-N4T1U3 S-1313D27-A4T2U3 S-1313D27-A4T1U3

2.8 V ± 1.0% S-1313D28-M5T1U3 S-1313D28-N4T1U3 S-1313D28-A4T2U3 S-1313D28-A4T1U3

2.85 V ± 1.0% S-1313D2J-M5T1U3 S-1313D2J-N4T1U3 S-1313D2J-A4T2U3 S-1313D2J-A4T1U3

2.9 V ± 1.0% S-1313D29-M5T1U3 S-1313D29-N4T1U3 S-1313D29-A4T2U3 S-1313D29-A4T1U3

3.0 V ± 1.0% S-1313D30-M5T1U3 S-1313D30-N4T1U3 S-1313D30-A4T2U3 S-1313D30-A4T1U3

3.1 V ± 1.0% S-1313D31-M5T1U3 S-1313D31-N4T1U3 S-1313D31-A4T2U3 S-1313D31-A4T1U3

3.2 V ± 1.0% S-1313D32-M5T1U3 S-1313D32-N4T1U3 S-1313D32-A4T2U3 S-1313D32-A4T1U3

3.3 V ± 1.0% S-1313D33-M5T1U3 S-1313D33-N4T1U3 S-1313D33-A4T2U3 S-1313D33-A4T1U3

3.4 V ± 1.0% S-1313D34-M5T1U3 S-1313D34-N4T1U3 S-1313D34-A4T2U3 S-1313D34-A4T1U3

3.5 V ± 1.0% S-1313D35-M5T1U3 S-1313D35-N4T1U3 S-1313D35-A4T2U3 S-1313D35-A4T1U3

Remark Please contact our sales office for products other than the above.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

9

 Pin Configurations

1. SOT-23-5

132

45

Top view

Figure 5

Table 7

Pin No. Symbol Description

1 VIN Input voltage pin

2 VSS GND pin

3 ON / OFF ON / OFF pin

4 NC*1 No connection

5 VOUT Output voltage pin

*1. The NC pin is electrically open.

The NC pin can be connected to the VIN pin or the VSS pin.

2. SC-82AB

12

34

Top view

Figure 6

Table 8

Pin No. Symbol Description

1 ON / OFF ON / OFF pin

2 VSS GND pin

3 VOUT Output voltage pin

4 VIN Input voltage pin

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

10

3. HSNT-4 (1010)

Top view

14

23

Bottom view

41

32

*1

Figure 7

Table 9

Pin No. Symbol Description

1 VOUT Output voltage pin

2 VSS GND pin

3 ON / OFF ON / OFF pin

4 VIN Input voltage pin

*1. Connect the heatsink of backside at shadowed area to the board, and set electric potential GND.

However, do not use it as the function of electrode.

4. HSNT-4 (0808)

Top view

14

23

Bottom view

41

32

*1

Figure 8

Table 10

Pin No. Symbol Description

1 VOUT Output voltage pin

2 VSS GND pin

3 ON / OFF ON / OFF pin

4 VIN Input voltage pin

*1. Connect the heat sink of backside at shadowed area to the board, and set electric potential GND.

However, do not use it as the function of electrode.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

11

 Absolute Maximum Ratings

Table 11

(Ta = +25°C unless otherwise specified)

Item Symbol Absolute Maximum Rating Unit

Input voltage VIN V

SS − 0.3 to VSS + 6.0 V

VON / OFF V

SS − 0.3 to VSS + 6.0 V

Output voltage VOUT V

SS − 0.3 to VIN + 0.3 V

Output current IOUT 240 mA

Power dissipation

SOT-23-5

PD

600*1 mW

SC-82AB 400*1 mW

HSNT-4 (1010) 340*1 mW

HSNT-4 (0808) 335*1 mW

Operation ambient temperature Topr −40 to +85 °C

Storage temperature Tstg −40 to +125 °C

*1. When mounted on board

[Mounted board]

(1) Board size: 114.3 mm × 76.2 mm × t1.6 mm

(2) Name: JEDEC STANDARD51-7

Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical

damage. These values must therefore not be exceeded under any conditions.

0 50 100 150

0

Power Dissipation (PD) [mW]

Ambient Temperature (Ta) [°C]

400

200

600

1000

800

1200

SOT-23-5

SC-82AB

HSNT-4 (0808)

HSNT-4

(1010)

Figure 9 Power Dissipation of Package (When Mounted on Board)

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

12

Power Dissipation of HSNT-4 (1010) and HSNT-4 (0808) (Reference)

Power dissipation of package differs depending on the mounting conditions.

Consider the power dissipation characteristics under the following conditions as reference.

[Mounted board]

(1) Board size: 40 mm × 40 mm × t0.8 mm

(2) Board material: Glass epoxy resin (four layers)

(3) Wiring ratio: 50%

(4) Test conditions: When mounted on board (wind speed: 0 m/s)

(5) Land pattern: Refer to the recommended land pattern

Drawing code: PL004-A-L-SD (HSNT-4 (1010)), PK004-A-L-SD (HSNT-4 (0808))

0 50 100 150

0

Power Dissipation (PD) [mW]

Ambient Temperature (Ta) [°C]

400

200

600

1000

800

1200

HSNT-4

(1010)

HSNT-4

(0808)

Figure 10 Power Dissipation of Package (When Mounted on Board)

Table 12

Condition Power Dissipation (Reference) Thermal Resistance Value (θj − a)

HSNT-4 (1010) (When mounted on board) 870 mW 115°C/W

HSNT-4 (0808) (When mounted on board) 850 mW 117°C/W

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

13

 Electrical Characteristics

Table 13

(Ta = +25°C unless otherwise specified)

Item Symbol Condition Min. Typ. Max. Unit Test

Circuit

Output voltage

*1

V

OUT(E)

V

IN

= V

OUT(S)

+

1.0 V,

I

OUT

= 30 mA

1.0 V

≤

V

OUT(S)

< 1.5 V V

OUT(S)

−

0.015 V

OUT(S)

V

OUT(S)

+

0.015 V 1

1.5 V

≤

V

OUT(S)

≤

3.5 V V

OUT(S)

×

0.99 V

OUT(S)

V

OUT(S)

×

1.01 V 1

Output current

*2

I

OUT

V

IN

≥

V

OUT(S)

+

1.0 V

≤

V

OUT(S)

< 1.1 V 100

*5

−

mA 3

1.1 V

≤

V

OUT(S)

< 1.2 V 125

*5

−

mA 3

1.2 V

≤

V

OUT(S)

< 1.3 V 150

*5

−

mA 3

1.3 V

≤

V

OUT(S)

< 1.4 V 175

*5

−

mA 3

1.4 V

≤

V

OUT(S)

≤

3.5 V 200

*5

−

mA 3

Dropout voltage

*3

V

drop

I

OUT

=

100 mA

1.0 V

≤

V

OUT(S)

< 1.1 V 0.50 0.76 1.55 V 1

1.1 V

≤

V

OUT(S)

< 1.2 V

−

0.67 1.39 V 1

1.2 V

≤

V

OUT(S)

< 1.3 V

−

0.58 1.25 V 1

1.3 V

≤

V

OUT(S)

< 1.4 V

−

0.49 1.11 V 1

1.4 V

≤

V

OUT(S)

< 1.5 V

−

0.43 0.99 V 1

1.5 V

≤

V

OUT(S)

< 1.7 V

−

0.37 0.85 V 1

1.7 V

≤

V

OUT(S)

< 1.8 V

−

0.31 0.68 V 1

1.8 V

≤

V

OUT(S)

< 2.0 V

−

0.27 0.58 V 1

2.0 V

≤

V

OUT(S)

< 2.5 V

−

0.23 0.49 V 1

2.5 V

≤

V

OUT(S)

< 2.8 V

−

0.18 0.38 V 1

2.8 V

≤

V

OUT(S)

< 3.0 V

−

0.17 0.33 V 1

3.0 V

≤

V

OUT(S)

≤

3.5 V

−

0.16 0.32 V 1

Line regulation

OUTIN

OUT1

VV

V

•Δ

Δ

V

OUT(S)

+

0.5 V

≤

V

IN

≤

5.5 V,

I

OUT

= 1

μ

A 1.0 V

≤

V

OUT(S)

≤

3.5 V

−

0.05 0.2 %/V 1

V

OUT(S)

+

0.5 V

≤

V

IN

≤

5.5 V,

I

OUT

=

30 mA

1.0 V

≤

V

OUT(S)

< 1.1 V

−

0.07 2.0 %/V 1

1.1 V

≤

V

OUT(S)

< 1.2 V

−

0.06 1.0 %/V 1

1.2 V

≤

V

OUT(S)

≤

3.5 V

−

0.05 0.2 %/V 1

Load regulation

Δ

V

OUT2

V

IN

=

V

OUT(S)

+

1.0 V,

1

μ

A

≤

I

OUT

≤

100 mA 1.0 V

≤

V

OUT(S)

≤

3.5 V

−

20 40 mV 1

V

IN

= V

OUT(S)

+

1.0 V,

100

μ

A

≤

I

OUT

≤

200 mA

1.0 V

≤

V

OUT(S)

< 1.1 V

−

40 640 mV 1

1.1 V

≤

V

OUT(S)

< 1.2 V

−

40 400 mV 1

1.2 V

≤

V

OUT(S)

< 1.3 V

−

40 160 mV 1

1.3 V

≤

V

OUT(S)

< 1.4 V

−

40 80 mV 1

1.4 V

≤

V

OUT(S)

≤

3.5 V

−

40 80 mV 1

Output voltage temperature coefficient

*4

OUT

VTa

V

•Δ

Δ

V

IN

=

V

OUT(S)

+

1.0 V, I

OUT

= 30 mA,

−

40

°

C

≤

Ta

≤

+

85

°

C

−

±

130

−

ppm/

°

C 1

Current consumption during operation I

SS1

V

IN

= V

OUT(S)

+

1.0 V, ON / OFF pin = ON, no load

−

0.9 1.35

μ

A 2

Current consumption during power-off I

SS2

V

IN

= V

OUT(S)

+

1.0 V, ON / OFF pin = OFF, no load

−

0.01 0.1

μ

A 2

Input voltage V

IN

−

1.5

−

5.5 V

−

ON / OFF pin input voltage "H" V

SH

V

IN

=

V

OUT(S)

+

1.0 V, R

L

=

1.0 k

Ω

,

determined by V

OUT

output level 1.0

−

V 4

ON / OFF pin input voltage "L" V

SL

V

IN

= V

OUT(S)

+

1.0 V, R

L

=

1.0 k

Ω

,

determined by V

OUT

output level

−

0.25 V 4

ON / OFF pin input current "H" I

SH

V

IN

= 5.5 V,

V

ON / OFF

=

5.5 V

B / D type (without constant current source pull-down)

−

0.1

−

0.1

μ

A 4

A / C type (with constant current source pull-down)

0.05 0.1 0.2

μ

A 4

ON / OFF pin input current "L" I

SL

V

IN

= 5.5 V, V

ON / OFF

= 0 V

−

0.1

−

0.1

μ

A 4

Short-circuit current I

short

V

IN

= V

OUT(S)

+

1.0 V, ON / OFF pin =

ON, V

OUT

= 0 V

−

50

−

mA 3

Thermal shutdown detection

temperature T

SD

Junction temperature

−

150

−

°

C

−

Thermal shutdown release temperature T

SR

Junction temperature

−

120

−

°

C

−

Discharge shunt resistance during

power-off R

LOW

V

OUT

= 0.1 V,

V

IN

=

5.5 V

A / B type

(with discharge shunt function)

−

35

−

Ω

3

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

14

*1. VOUT(S): Set output voltage

VOUT(E): Actual output voltage

Output voltage when fixing IOUT (=

30 mA) and inputting VOUT(S)

+

1.0 V

*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.

*3. Vdrop = VIN1 − (VOUT3 × 0.98)

V

OUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.

VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input

voltage.

*4. A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.

ΔVOUT

ΔTa []

mV/°C *1 = VOUT(S) []

V*2 × ΔVOUT

ΔTa•VOUT []

ppm/°C *3 ÷ 1000

*1. Change in temperature of output voltage

*2. Set output voltage

*3. Output voltage temperature coefficient

*5. The output current can be at least this value.

Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the

power dissipation of the package when the output current is large.

This specification is guaranteed by design.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

15

 Test Circuits

+

VOUT

VIN

VSS

+

V

A

ON / OFF

Set to ON

Figure 11 Test Circuit 1

VOUT

VIN

Set to V

IN

or GND

+

A

ON / OFF

VSS

Figure 12 Test Circuit 2

Set to V

IN

or GND

VOUT

VIN

+

V

A

ON / OFF

VSS

Figure 13 Test Circuit 3

VOUT

VIN

+

V

ON / OFF

VSS

+

A R

L

Figure 14 Test Circuit 4

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

16

 Standard Circuit

C

IN*1

C

L*2

Input

Output

GND

Single GND

VOUT

VIN

VSS

ON / OFF

*1. C

IN is a capacitor for stabilizing the input.

*2. A ceramic capacitor of 0.1 μF or more can be used as CL.

Figure 15

Caution The above connection diagram and constants will not guarantee successful operation. Perform

thorough evaluation using the actual application to set the constansts.

 Condition of Application

Input capacitor (CIN): 0.1 μF or more

Output capacitor (CL): 0.1 μF or more

Caution Generally a series regulator may cause oscillation, depending on the selection of external parts.

Confirm that no oscillation occurs in the application for which the above capacitors are used.

 Selection of Input and Output Capacitors (CIN, CL)

The S-1313 Series requires an output capacitor between the VOUT pin and the VSS pin for phase compensation.

Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1 μF or more over the entire temperature

range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must

be 0.1 μF or more.

The value of the output overshoot or undershoot transient response varies depending on the value of the output

capacitor. The required capacitance of the input capacitor differs depending on the application.

The recommended capacitance for an application is CIN ≥ 0.1 μF, CL ≥ 0.1 μF; however, when selecting the output

capacitor, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

17

 Explanation of Terms

1. Low dropout voltage regulator

This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.

2. Output voltage (VOUT)

The accuracy of the output voltage is ensured at ±1.0% or ±15 mV*1 under the specified conditions of fixed input

voltage*2, fixed output current, and fixed temperature.

*1. When VOUT < 1.5 V: ±15 mV, when VOUT ≥ 1.5 V: ±1.0%

*2. Differs depending on the product.

Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range

of the output voltage. Refer to " Electrical Characteristics" and " Characteristics (Typical

Data)" for details.

3. Line regulation 





ΔVOUT1

ΔVIN • VOUT

Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output

voltage changes due to a change in the input voltage with the output current remaining unchanged.

4. Load regulation (ΔVOUT2)

Indicates the dependency of the output voltage on the output current. That is, the values show how much the output

voltage changes due to a change in the output current with the input voltage remaining unchanged.

5. Dropout voltage (Vdrop)

Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN)

gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at VIN =

VOUT(S) + 1.0 V.

Vdrop = VIN1 − (VOUT3 × 0.98)

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

18

6. Output voltage temperature coefficient 





ΔVOUT

ΔTa • VOUT

The shaded area in Figure 16 is the range where VOUT varies in the operation temperature range when the output

voltage temperature coefficient is ±130 ppm/°C.

V

OUT(E)*1

Example of S-1313A10 typ. product

−40 +25

+0.13 mV/°C

V

OUT

[V]

*1. V

OUT(E)

is the value of the output voltage measured at Ta = +25°C.

+85 Ta [°C]

−0.13 mV/°C

Figure 16

A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.

ΔVOUT

ΔTa []

mV/°C *1 = VOUT(S) []

V*2 × ΔVOUT

ΔTa • VOUT []

ppm/°C *3 ÷ 1000

*1. Change in temperature of output voltage

*2. Set output voltage

*3. Output voltage temperature coefficient

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

19

 Operation

1. Basic operation

Figure 17 shows the block diagram of the S-1313 Series.

The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage

resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant

output voltage which is not influenced by the input voltage and temperature change, to the output transistor.

*1

*1. Parasitic diode

VS

S

Current

supply

−

+

Vfb

Vref

VIN

VOUT

Rf

Rs

Error

amplifier

Reference voltage

circuit

Figure 17

2. Output transistor

In the S-1313 Series, a low on-resistance P-channel MOS FET is used as the output transistor.

Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due to reverse

current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became higher

than VIN.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

20

3. ON / OFF pin

This pin starts and stops the regulator.

When the ON / OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in P-channel MOS

FET output transistor between the VIN pin and the VOUT pin is turned off, reducing current consumption significantly.

Note that the current consumption increases when a voltage of 0.25 V to VIN − 0.3 V is applied to the ON / OFF pin.

The ON / OFF pin is configured as shown in Figure 18 and Figure 19.

3. 1 S-1313 Series A / C type

The ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the VSS

level.

3. 2 S-1313 Series B / D type

The ON / OFF pin is not internally pulled down to the VSS pin, so do not use this pin in the floating status. When not

using the ON / OFF pin, connect the pin to the VIN pin.

Table 14

Product Type ON / OFF Pin Internal Circuit VOUT Pin Voltage Current Consumption

A / B / C / D "H": ON Operate Set value ISS1*1

A / B / C / D "L": OFF Stop VSS level ISS2

*1. Note that the IC's current consumption increases as much as current flows into the constant current of 0.1

μA typ. when the ON / OFF pin is connected to the VIN pin and the S-1313 Series A / C type is operating

(refer to Figure 18).

VSS

VIN

ON / OFF

VSS

VIN

ON / OFF

Figure 18 S-1313 Series A / C type Figure 19 S-1313 Series B / D type

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

21

4. Discharge shunt function (S-1313 Series A / B type)

The S-1313 Series A / B type has a built-in discharge shunt circuit to discharge the output capacitance.

The output capacitance is discharged as follows so that the VOUT pin reaches the VSS level.

(1) The ON / OFF pin is set to OFF level.

(2) The output transistor is turned off.

(3) The discharge shunt circuit is turned on.

(4) The output capacitor discharges.

Since the S-1313 Series C / D type does not have a discharge shunt circuit, the VOUT pin is set to VSS level through

several MΩ internal divided resistors between the VOUT pin and the VSS pin. The S-1313 Series A / B type allows the

VOUT pin to reach the VSS level rapidly due to the discharge shunt circuit.

Output transistor: OFF

ON / OFF Pin: OFF

VIN

ON / OFF

VSS

ON / OFF circuit

Discharge shunt circuit

: ON

VOUT

*1

*1. Parasitic diode

Current flow

GND

*1

S-1313 Series

Output

capacitor

(C

L

)

Figure 20

5. Constant current source pull-down (S-1313 Series A / C type)

The ON / OFF pin is internally pulled down to the VSS pin in the floating status, so the VOUT pin is set to the VSS level.

Note that the IC's current consumption increases as much as current flows into the constant current of 0.1 μA typ. when

the ON / OFF pin is connected to the VIN pin and the S-1313 Series A / C type is operating.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

22

6. Overcurrent protection circuit

The S-1313 Series includes an overcurrent protection circuit which has the characteristics shown in "1. Output

voltage vs. Output current (When load current increases) (Ta = +25°C)" in " Characteristics (Typical Data)", in

order to protect the output transistor against an excessive output current and short circuiting between the VOUT pin

and the VSS pin. The current when the output pin is short-circuited (Ishort) is internally set at approx. 50 mA typ., and the

normal value is restored for the output voltage, if releasing a short circuit once.

Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps short

circuiting inside, pay attention to the conditions of input voltage and load current so that, under the

usage conditions including short circuit, the loss of the IC will not exceed power dissipation of the

package.

7. Thermal shutdown circuit

The S-1313 Series has a thermal shutdown circuit to protect the device from damage due to overheat. When the

junction temperature rises to 150°C typ., the thermal shutdown circuit operates to stop regulating. When the junction

temperature drops to 120°C typ., the thermal shutdown circuit is released to restart regulating.

Due to self-heating of the S-1313 Series, if the thermal shutdown circuit starts operating, it stops regulating so that the

output voltage drops. When regulation stops, the S-1313 Series does not itself generate heat and the IC's

temperature drops. When the temperature drops, the thermal shutdown circuit is released to restart regulating, thus

this IC generates heat again. Repeating this procedure makes the waveform of the output voltage into a pulse-like

form. Stop or restart of regulation continues unless decreasing either or both of the input voltage and the output

current in order to reduce the internal power consumption, or decreasing the ambient temperature.

Table 15

Thermal Shutdown Circuit VOUT Pin Voltage

Operate: 150°C typ.*1 VSS level

Release: 120°C typ.*1 Set value

*1. Junction temperature

8. Thermal shutdown circuit stop function

The S-1313 Series has a thermal shutdown circuit stop function during low load current.

When the load current is approx. 0.2 mA or less, the current that flows in the thermal shutdown circuit is stopped and

the thermal shutdown circuit stops operating. This makes the super low current consumption operation possible.

When the load current is approx. 0.5 mA or more, a current is applied to the thermal shutdown circuit, thus making the

protection operation possible.

0

I

OUT

[mA]

7.0

6.0

5.0

4.0

3.0

2.0

1.0

3.02.0 2.51.51.00.5

I

SS1

[μA]

Thermal shutdown circuit operating

Operation at super low current consumption

Figure 21

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

23

 Precautions

• Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When

mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor for stabilizing the input

between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short as

possible.

• Note that generally the output voltage may increase when a series regulator is used at low load current (10 μA or less).

• Note that generally the output voltage may increase due to the leakage current from an output driver when a series

regulator is used at high temperature.

• Note that the output voltage may increase due to the leakage current from an output driver even if the ON / OFF pin is

at OFF level when a series regulator is used at high temperature.

• Generally a series regulator may cause oscillation, depending on the selection of external parts. The following

conditions are recommended for the S-1313 Series. However, be sure to perform sufficient evaluation under the actual

usage conditions for selection, including evaluation of temperature characteristics. Refer to "6. Example of

equivalent series resistance vs. Output current characteristics (Ta = +25°C)" in " Reference Data" for the

equivalent series resistance (RESR) of the output capacitor.

Input capacitor (CIN): 0.1 μF or more

Output capacitor (CL): 0.1 μF or more

• The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is small

or an input capacitor is not connected.

• Ringing may occur when these three conditions below are satisfied. Before selecting an input capacitor, be sure to

evaluate sufficiently under the actual usage conditions, including the temperature characteristics.

The power supply inductance is high.

The load current is 100 mA or more.

The difference between the input voltage and the output voltage is close to the value of dropout voltage.

• If the output capacitance is small, power supply's fluctuation and the characteristics of load fluctuation become worse.

Sufficiently evaluate the output voltage's fluctuation with the actual device.

• Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power

supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device.

• The application conditions for the input voltage, the output voltage, and the load current should not exceed the

package power dissipation.

• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic

protection circuit.

• In determining the output current, attention should be paid to the output current value specified in Table 13 in

" Electrical Characteristics" and footnote *5 of the table.

• ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products

including this IC of patents owned by a third party.

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

24

 Characteristics (Typical Data)

1. Output voltage vs. Output current (When load current increases) (Ta = +25°C)

1. 1 VOUT = 1.0 V 1. 2 VOUT = 2.5 V

0

V

OUT

[V]

0

I

OUT

[mA]

1.2

500400300200100

1.0

0.8

0.6

0.4

0.2

V

IN

= 1.3 V

V

IN

= 5.5 V

V

IN

= 1.5 V

V

IN

= 3.0 V

V

IN

= 2.0 V

0

V

OUT

[V]

0

I

OUT

[mA]

3.0

500400300200100

2.5

2.0

1.5

1.0

0.5

V

IN

= 2.8 V

V

IN

= 4.5 V

V

IN

= 5.5 V

V

IN

= 3.5 V

V

IN

= 3.0 V

1. 3 VOUT = 3.5 V

0

V

OUT

[V]

0

I

OUT

[mA]

4.0

3.5

3.0

2.5

2.0

1.5

1.0

0.5

500400300200100

V

IN

= 3.8 V

V

IN

= 4.0 V

V

IN

= 4.5 V

V

IN

= 5.5 V

Remark In determining the output current, attention should

be paid to the following.

1. The minimum output current value and

footnote *5 in Table 13 in " Electrical

Characteristics"

2. The package power dissipation

2. Output voltage vs. Input voltage (Ta = +25°C)

2. 1 VOUT = 1.0 V 2. 2 VOUT = 2.5 V

0.6

VOUT [V]

0.6

VIN [V]

1.2

2.62.21.81.41.0

1.1

1.0

0.9

0.8

0.7

IOUT = 1 mA

IOUT = 50 mA

IOUT = 30 mA

IOUT = 100 mA

2.0

VOUT [V]

2.0

VIN [V]

2.7

2.6

2.5

2.4

2.3

2.2

2.1

4.54.03.53.02.5

IOUT = 1 mA

IOUT = 50 mA

IOUT = 30 mA

IOUT = 100 mA

2. 3 VOUT = 3.5 V

3.0

V

OUT

[V]

3.0

V

IN

[V]

3.7

3.6

3.5

3.4

3.3

3.2

3.1

5.55.04.54.03.5

I

OUT

= 1 mA

I

OUT

= 50 mA

I

OUT

= 30 mA

I

OUT

= 100 mA

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

25

3. Dropout voltage vs. Output current

3. 1 VOUT = 1.0 V 3. 2 VOUT = 2.5 V

0

V

drop

[V]

0

I

OUT

[mA]

1.4

200

1.2

1.0

0.8

0.6

0.4

0.2

175150125100755025

Ta =

+

25

°C

Ta =

+

85

°C

Ta

=

−40°C

0

V

drop

[V]

0

I

OUT

[mA]

0.50

200175150125100755025

0.45

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

Ta = +85

°C

Ta =

+

25

°C

Ta

=

−40°C

3. 3 VOUT = 3.5 V

0

V

drop

[V]

0

I

OUT

[mA]

0.50

200175150125100755025

0.45

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

Ta = +85

°C

Ta =

+

25

°C

Ta

=

−40°C

4. Dropout voltage vs. Set output voltage

1.0 2.0 2.5

Vdrop [V]

1.2

VOUT(S) [V]

1.5 3.0 3.5

1.0

0.8

0.6

0.4

0.2

0

IOUT = 1 mA

IOUT = 10 mA

IOUT = 30 mA

IOUT = 50 mA

IOUT = 100 mA

IOUT = 200 mA

IOUT = 0.1 mA

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

26

5. Output voltage vs. Ambient temperature

5. 1 VOUT = 1.0 V 5. 2 VOUT = 2.5 V

−40 0 255075

V

OUT

[V]

1.10

1.00

0.95

0.90

Ta [°C]

1.05

−25 85

−40 0 255075

V

OUT

[V]

2.7

2.5

2.4

2.3

Ta [°C]

2.6

−25 85

5. 3 VOUT = 3.5 V

−40 0 255075

V

OUT

[V]

3.8

3.2

Ta [°C]

−25 85

3.7

3.6

3.5

3.4

3.3

6. Current consumption vs. Input voltage

6. 1 VOUT = 1.0 V 6. 2 VOUT = 2.5 V

024

0

31

1.4

56

1.2

1.0

0.8

0.6

0.4

0.2

I

SS1

[μA]

V

IN

[V]

Ta =

+

85

°C

Ta =

−40

°C

Ta =

+

25

°C

0243156

I

SS1

[μA]

V

IN

[V]

0

1.4

1.2

1.0

0.8

0.6

0.4

0.2

Ta =

+

85

°C

Ta =

+

25

°C

Ta =

−40

°C

6. 3 VOUT = 3.5 V

0243156

I

SS1

[μA]

V

IN

[V]

0

1.4

1.2

1.0

0.8

0.6

0.4

0.2

Ta =

+

85

°C

Ta =

−40

°C

Ta =

+

25

°C

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

27

7. Current consumption vs. Ambient temperature

7. 1 VOUT = 1.0 V 7. 2 VOUT = 2.5 V

−40 0 255075

Ta [°C]

−25 85

0

1.4

1.2

1.0

0.8

0.6

0.4

0.2

ISS1 [μA]

VIN = 2.0 V

VIN = 5.5 V

−40 0 255075

Ta [°C]

−25 85

0

1.4

1.2

1.0

0.8

0.6

0.4

0.2

I

SS1

[μA]

V

IN

= 3.5 V

V

IN

= 5.5 V

7. 3 VOUT = 3.5 V

−40 0 255075

Ta [°C]

−25 85

0

1.4

1.2

1.0

0.8

0.6

0.4

0.2

ISS1 [μA]

VIN = 4.5 V

5.5 V

8. Current consumption vs. Output current

8. 1 VOUT = 1.0 V 8. 2 VOUT = 2.5 V

0

I

OUT

[mA]

40

35

30

25

20

15

10

5

2001601208040

I

SS1

[μA]

V

IN

= 2.0 V

V

IN

= 5.5 V

0

I

OUT

[mA]

40

35

30

25

20

15

10

5

2001601208040

I

SS1

[μA]

V

IN

= 3.5 V

V

IN

= 5.5 V

8. 3 VOUT = 3.5 V

0

I

OUT

[mA]

40

35

30

25

20

15

10

5

2001601208040

I

SS1

[μA]

V

IN

= 4.5 V

V

IN

= 5.5 V

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

28

 Reference Data

1. Transient response characteristics when input (Ta = +25°C)

1. 1 VOUT = 1.0 V

I

OUT

= 1 mA, C

IN

= C

L

= 0.1

μ

F, V

IN

= 2.0 V

↔

3.0 V, t

r

= t

f

=

5.0

μ

s

V

OUT

[V]

1.6

1.5

1.4

1.3

1.2

1.1

1.0

0.9

0.8

t [μs]

V

IN

[V]

4.0

3.0

2.5

2.0

0

0.5

1.0

1.5

3.5

−20 80 1200 20 40 60 100 140−40

V

OUT

V

IN

I

OUT

= 100 mA, C

IN

= C

L

= 0.1

μ

F, V

IN

= 2.0 V

↔

3.0 V, t

r

= t

f

=

5.0

μ

s

V

OUT

[V]

1.6

1.5

1.4

1.3

1.2

1.1

1.0

0.9

0.8

t [μs]

V

IN

[V]

4.0

3.0

2.5

2.0

0

0.5

1.0

1.5

3.5

−20 80 1200 20 40 60 100 140−40

V

OUT

V

IN

1. 2 VOUT = 2.5 V

I

OUT

= 1 mA, C

IN

= C

L

= 0.1

μ

F, V

IN

= 3.5 V

↔

4.5 V, t

r

= t

f

=

5.0

μ

s

V

OUT

[V]

3.1

3.0

2.9

2.8

2.7

2.6

2.5

2.4

2.3

t [μs]

V

IN

[V]

5.5

4.5

4.0

3.5

1.5

2.0

2.5

3.0

5.0

−20 80 1200 20 40 60 100 140−40

V

OUT

V

IN

I

OUT

= 100 mA, C

IN

= C

L

=

0.1

μ

F, V

IN

= 3.5 V

↔

4.5 V, t

r

= t

f

=

5.0

μ

s

V

OUT

[V]

3.1

3.0

2.9

2.8

2.7

2.6

2.5

2.4

2.3

t [μs]

V

IN

[V]

5.5

4.5

4.0

3.5

1.5

2.0

2.5

3.0

5.0

−20 80 1200 20 40 60 100 140−40

V

OUT

V

IN

1. 3 VOUT = 3.5 V

I

OUT

= 1 mA, C

IN

= C

L

= 0.1

μ

F, V

IN

= 4.5 V

↔

5.5 V, t

r

= t

f

=

5.0

μ

s

V

OUT

[V]

4.1

4.0

3.9

3.8

3.7

3.6

3.5

3.4

3.3

t [μs]

V

IN

[V]

6.5

5.5

5.0

4.5

2.5

3.0

3.5

4.0

6.0

−20 80 1200 20 40 60 100 140−40

V

OUT

V

IN

I

OUT

= 100 mA, C

IN

= C

L

= 0.1

μ

F, V

IN

= 4.5 V

↔

5.5 V, t

r

= t

f

=

5.0

μ

s

V

OUT

[V]

4.1

4.0

3.9

3.8

3.7

3.6

3.5

3.4

3.3

t [μs]

V

IN

[V]

6.5

5.5

5.0

4.5

2.5

3.0

3.5

4.0

6.0

−20 80 1200 20 40 60 100 140−40

V

OUT

V

IN

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

29

2. Transient response characteristics of load (Ta = +25°C)

2. 1 VOUT = 1.0 V

VIN = 2.0 V, CIN = CL = 0.1 μF, IOUT = 1 mA ↔ 50 mA

V

OUT

[V]

2.6

0.2

0.6

1.0

1.4

1.8

2.2

t [μs]

I

OUT

[mA]

100

−200

6005004003002001000−100−200

−150

−100

−50

0

50

V

OUT

I

OUT

VIN = 2.0 V, CIN = CL = 0.1 μF, IOUT = 50 mA ↔ 100 mA

VOUT [V]

2.6

0.2

0.6

1.0

1.4

1.8

2.2

t [μs]

IOUT [mA]

150

−150

300250200150100500−50−100

−100

−50

0

50

100

VOUT

IOUT

2. 2 VOUT = 2.5 V

VIN = 3.5 V, CIN = CL = 0.1 μF, IOUT = 1 mA ↔ 50 mA

V

OUT

[V]

t [ms]

−0.2 0.8 1.20 0.2 0.4 0.6 1 1.4−0.4

4.9

1.3

1.9

2.5

3.1

3.7

4.3

I

OUT

[mA]

100

−200

−150

−100

−50

0

50

V

OUT

I

OUT

VIN = 3.5 V, CIN = CL = 0.1 μF, IOUT = 50 mA ↔ 100 mA

VOUT [V]

t [μs]

−100 400 6000 100 200 300 500 700−200

3.7

1.9

2.2

2.5

2.8

3.1

3.4

IOUT [mA]

150

−150

−100

−50

0

50

100

VOUT

IOUT

2. 3 VOUT = 3.5 V

VIN = 4.5 V, CIN = CL = 0.1 μF, IOUT = 1 mA ↔ 50 mA

V

OUT

[V]

t [ms]

−0.2 0.8 1.20 0.2 0.4 0.6 1 1.4−0.4

6.3

2.1

2.8

3.5

4.2

4.9

5.6

I

OUT

[mA]

100

−200

−150

−100

−50

0

50

V

OUT

I

OUT

VIN = 4.5 V, CIN = CL = 0.1 μF, IOUT = 50 mA ↔ 100 mA

VOUT [V]

t [μs]

−100 400 6000 100 200 300 500 700−200

4.7

2.9

3.2

3.5

3.8

4.1

4.4

IOUT [mA]

150

−150

−100

−50

0

50

100

VOUT

IOUT

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

30

3. Transient response characteristics of ON / OFF pin (Ta = +25°C)

3. 1 VOUT = 1.0 V

V

IN

= 2.0 V, C

IN

= C

L

= 0.1

μ

F, I

OUT

= 1 mA, V

ON / OFF

= 0 V

→

2 V, t

r

= 1.0

μ

s

−100

−0.5

2.5

400

2.0

1.5

1.0

0.5

0

3002001000

VOUT [V]

t [μs]

VON / OFF [V]

4

2

0

−2

−4

−6

−8

VOUT

VON / OFF

V

IN

= 2.0 V, C

IN

= C

L

= 0.1

μ

F, I

OUT

= 100 mA, V

ON / OFF

= 0 V

→

2 V, t

r

= 1.0

μ

s

−100

−0.5

2.5

400

2.0

1.5

1.0

0.5

0

3002001000

V

OUT

[V]

t [μs]

V

ON / OFF

[V]

4

2

0

−2

−4

−6

−8

V

ON / OFF

V

OUT

3. 2 VOUT = 2.5 V

V

IN

= 3.5 V, C

IN

= C

L

= 0.1

μ

F, I

OUT

= 1 mA, V

ON / OFF

= 0 V

→

3.5 V, t

r

= 1.0

μ

s

−200

−2

10

1000

8

6

4

2

0

V

OUT

[V]

t [μs]

V

ON / OFF

[V]

6

4

2

0

−2

−4

−6

0 200 400 600 800

V

ON / OFF

V

OUT

V

IN

= 3.5 V, C

IN

= C

L

= 0.1

μ

F, I

OUT

=

100 mA, V

ON / OFF

= 0 V

→

3.5 V, t

r

= 1.0

μ

s

−200

−2

10

1000

8

6

4

2

0

V

OUT

[V]

t [μs]

V

ON / OFF

[V]

6

4

2

0

−2

−4

−6

0 200 400 600 800

V

ON / OFF

V

OUT

3. 3 VOUT = 3.5 V

V

IN

= 4.5 V, C

IN

= C

L

= 0.1

μ

F, I

OUT

= 1 mA, V

ON / OFF

= 0 V

→

4.5 V, t

r

= 1.0

μ

s

−200

−2

14

1000

V

OUT

[V]

t [μs]

V

ON / OFF

[V]

8

−8

0 200 400 600 800

12

10

8

6

4

2

0

4

2

0

−6

−4

−2

6

V

ON / OFF

V

OUT

V

IN

= 4.5 V, C

IN

= C

L

= 0.1

μ

F, I

OUT

= 100 mA, V

ON / OFF

= 0 V

→

4.5 V, t

r

= 1.0

μ

s

−200

−2

14

1000

V

OUT

[V]

t [μs]

V

ON / OFF

[V]

8

−8

0 200 400 600 800

12

10

8

6

4

2

0

4

2

0

−6

−4

−2

6

V

ON / OFF

V

OUT

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

31

4. Output capacitance vs. Characteristics of discharge time (Ta = +25°C)

VIN = VOUT + 1.0 V, IOUT = no load,

VON / OFF = VOUT + 1.0 V → VSS, tf = 1 μs

t

DSC

[ms]

0

C

L

[μF]

2468

1.4

010

12

1.2

1.0

0.8

0.6

0.4

0.2

V

OUT(S)

= 1.0 V

V

OUT(S)

= 3.5 V

V

OUT(S)

= 2.5 V

V

OUT

V

ON / OFF

1

μ

s

t

DSC

V

OUT

× 10%

V

SS

V

IN

= V

OUT

+ 1.0 V

V

ON / OFF

= V

OUT

+ 1.0 V → V

SS

Figure 22 S-1313 Series A / B type

(with discharge shunt function) Figure 23 Measurement Condition of Discharge Time

5. Ripple rejection (Ta = +25°C)

5. 1 VOUT = 1.0 V 5. 2 VOUT = 2.5 V

VIN = 2.0 V, CL = 0.1 μF

10 100 1k 10k 100k

Ripple Rejection [dB]

0

Frequency [Hz]

1M

100

90

80

70

60

50

40

30

20

10

IOUT = 1 mA

IOUT = 100 mA

IOUT = 30 mA

VIN = 3.5 V, CL = 0.1 μF

10 100 1k 10k 100k

Ripple Rejection [dB]

0

Frequency [Hz]

1M

100

90

80

70

60

50

40

30

20

10

IOUT = 1 mA

IOUT = 100 mA

IOUT = 30 mA

IOUT = 200 mA

5. 3 VOUT = 3.5 V

VIN = 4.5 V, CL = 0.1 μF

10 100 1k 10k 100k

Ripple Rejection [dB]

0

Frequency [Hz]

1M

100

90

80

70

60

50

40

30

20

10

I

OUT

= 1 mA

I

OUT

= 100 mA

I

OUT

= 30 mA

I

OUT

= 200 mA

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

32

6. Example of equivalent series resistance vs. Output current characteristics (Ta = +25°C)

100

0.01 240

I

OUT

[mA]

R

ESR

[Ω]

C

IN

= C

L

= 0.1 μF

0

Stable

CIN

VIN

VSS

S-1313 Series

VOUT

ON / OFF

CL

*1

RESR

*1. CL: Murata Manufacturing Co., Ltd. GRM31CR72E104K (0.1 μF)

Figure 24 Figure 25

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

33

 Marking Specifications

1. SOT-23-5

123

45

Top view

(1) (2) (3) (4)

(1) to (3): Product code (Refer to Product name vs. Product code)

(4): Lot number

Product name vs. Product code

1. 1 S-1313 Series A type 1. 2 S-1313 Series B type

Product Name Product Code

(1) (2) (3)

S-1313A10-M5T1U3 1 L A

S-1313A11-M5T1U3 1 L B

S-1313A12-M5T1U3 1 L C

S-1313A13-M5T1U3 1 L D

S-1313A14-M5T1U3 1 L E

S-1313A15-M5T1U3 1 L F

S-1313A16-M5T1U3 1 L G

S-1313A17-M5T1U3 1 L H

S-1313A18-M5T1U3 1 L J

S-1313A1J-M5T1U3 1 L K

S-1313A19-M5T1U3 1 L L

S-1313A20-M5T1U3 1 L N

S-1313A21-M5T1U3 1 L O

S-1313A22-M5T1U3 1 L P

S-1313A23-M5T1U3 1 L Q

S-1313A24-M5T1U3 1 L R

S-1313A25-M5T1U3 1 L S

S-1313A26-M5T1U3 1 L T

S-1313A27-M5T1U3 1 L V

S-1313A28-M5T1U3 1 L U

S-1313A2J-M5T1U3 1 L X

S-1313A29-M5T1U3 1 L Y

S-1313A30-M5T1U3 1 L Z

S-1313A31-M5T1U3 1 L 1

S-1313A32-M5T1U3 1 L 2

S-1313A33-M5T1U3 1 L 3

S-1313A34-M5T1U3 1 L 4

S-1313A35-M5T1U3 1 L 5

Product Name Product Code

(1) (2) (3)

S-1313B10-M5T1U3 1 N A

S-1313B11-M5T1U3 1 N B

S-1313B12-M5T1U3 1 N C

S-1313B13-M5T1U3 1 N D

S-1313B14-M5T1U3 1 N E

S-1313B15-M5T1U3 1 N F

S-1313B16-M5T1U3 1 N G

S-1313B17-M5T1U3 1 N H

S-1313B18-M5T1U3 1 N J

S-1313B1J-M5T1U3 1 N K

S-1313B19-M5T1U3 1 N L

S-1313B20-M5T1U3 1 N N

S-1313B21-M5T1U3 1 N O

S-1313B22-M5T1U3 1 N P

S-1313B23-M5T1U3 1 N Q

S-1313B24-M5T1U3 1 N R

S-1313B25-M5T1U3 1 N S

S-1313B26-M5T1U3 1 N T

S-1313B27-M5T1U3 1 N U

S-1313B28-M5T1U3 1 N V

S-1313B2J-M5T1U3 1 N X

S-1313B29-M5T1U3 1 N Y

S-1313B30-M5T1U3 1 N Z

S-1313B31-M5T1U3 1 N 1

S-1313B32-M5T1U3 1 N 2

S-1313B33-M5T1U3 1 N 3

S-1313B34-M5T1U3 1 N 4

S-1313B35-M5T1U3 1 N 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

34

1. 3 S-1313 Series C type 1. 4 S-1313 Series D type

Product Name Product Code

(1) (2) (3)

S-1313C10-M5T1U3 1 O A

S-1313C11-M5T1U3 1 O B

S-1313C12-M5T1U3 1 O C

S-1313C13-M5T1U3 1 O D

S-1313C14-M5T1U3 1 O E

S-1313C15-M5T1U3 1 O F

S-1313C16-M5T1U3 1 O G

S-1313C17-M5T1U3 1 O H

S-1313C18-M5T1U3 1 O J

S-1313C1J-M5T1U3 1 O K

S-1313C19-M5T1U3 1 O L

S-1313C20-M5T1U3 1 O N

S-1313C21-M5T1U3 1 O O

S-1313C22-M5T1U3 1 O P

S-1313C23-M5T1U3 1 O Q

S-1313C24-M5T1U3 1 O R

S-1313C25-M5T1U3 1 O S

S-1313C26-M5T1U3 1 O T

S-1313C27-M5T1U3 1 O U

S-1313C28-M5T1U3 1 O V

S-1313C2J-M5T1U3 1 O X

S-1313C29-M5T1U3 1 O Y

S-1313C30-M5T1U3 1 O Z

S-1313C31-M5T1U3 1 O 1

S-1313C32-M5T1U3 1 O 2

S-1313C33-M5T1U3 1 O 3

S-1313C34-M5T1U3 1 O 4

S-1313C35-M5T1U3 1 O 5

Product Name Product Code

(1) (2) (3)

S-1313D10-M5T1U3 1 P A

S-1313D11-M5T1U3 1 P B

S-1313D12-M5T1U3 1 P C

S-1313D13-M5T1U3 1 P D

S-1313D14-M5T1U3 1 P E

S-1313D15-M5T1U3 1 P F

S-1313D16-M5T1U3 1 P G

S-1313D17-M5T1U3 1 P H

S-1313D18-M5T1U3 1 P J

S-1313D1J-M5T1U3 1 P K

S-1313D19-M5T1U3 1 P L

S-1313D20-M5T1U3 1 P N

S-1313D21-M5T1U3 1 P O

S-1313D22-M5T1U3 1 P P

S-1313D23-M5T1U3 1 P Q

S-1313D24-M5T1U3 1 P R

S-1313D25-M5T1U3 1 P S

S-1313D26-M5T1U3 1 P T

S-1313D27-M5T1U3 1 P U

S-1313D28-M5T1U3 1 P V

S-1313D2J-M5T1U3 1 P X

S-1313D29-M5T1U3 1 P Y

S-1313D30-M5T1U3 1 P Z

S-1313D31-M5T1U3 1 P 1

S-1313D32-M5T1U3 1 P 2

S-1313D33-M5T1U3 1 P 3

S-1313D34-M5T1U3 1 P 4

S-1313D35-M5T1U3 1 P 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

35

2. SC-82AB

(1) (2) (3)

12

3

4

Top view

(1) to (3): Product code (Refer to Product name vs. Product code)

Product name vs. Product code

2. 1 S-1313 Series A type 2. 2 S-1313 Series B type

Product Name Product Code

(1) (2) (3)

S-1313A10-N4T1U3 1 L A

S-1313A11-N4T1U3 1 L B

S-1313A12-N4T1U3 1 L C

S-1313A13-N4T1U3 1 L D

S-1313A14-N4T1U3 1 L E

S-1313A15-N4T1U3 1 L F

S-1313A16-N4T1U3 1 L G

S-1313A17-N4T1U3 1 L H

S-1313A18-N4T1U3 1 L J

S-1313A1J-N4T1U3 1 L K

S-1313A19-N4T1U3 1 L L

S-1313A20-N4T1U3 1 L N

S-1313A21-N4T1U3 1 L O

S-1313A22-N4T1U3 1 L P

S-1313A23-N4T1U3 1 L Q

S-1313A24-N4T1U3 1 L R

S-1313A25-N4T1U3 1 L S

S-1313A26-N4T1U3 1 L T

S-1313A27-N4T1U3 1 L V

S-1313A28-N4T1U3 1 L U

S-1313A2J-N4T1U3 1 L X

S-1313A29-N4T1U3 1 L Y

S-1313A30-N4T1U3 1 L Z

S-1313A31-N4T1U3 1 L 1

S-1313A32-N4T1U3 1 L 2

S-1313A33-N4T1U3 1 L 3

S-1313A34-N4T1U3 1 L 4

S-1313A35-N4T1U3 1 L 5

Product Name Product Code

(1) (2) (3)

S-1313B10-N4T1U3 1 N A

S-1313B11-N4T1U3 1 N B

S-1313B12-N4T1U3 1 N C

S-1313B13-N4T1U3 1 N D

S-1313B14-N4T1U3 1 N E

S-1313B15-N4T1U3 1 N F

S-1313B16-N4T1U3 1 N G

S-1313B17-N4T1U3 1 N H

S-1313B18-N4T1U3 1 N J

S-1313B1J-N4T1U3 1 N K

S-1313B19-N4T1U3 1 N L

S-1313B20-N4T1U3 1 N N

S-1313B21-N4T1U3 1 N O

S-1313B22-N4T1U3 1 N P

S-1313B23-N4T1U3 1 N Q

S-1313B24-N4T1U3 1 N R

S-1313B25-N4T1U3 1 N S

S-1313B26-N4T1U3 1 N T

S-1313B27-N4T1U3 1 N U

S-1313B28-N4T1U3 1 N V

S-1313B2J-N4T1U3 1 N X

S-1313B29-N4T1U3 1 N Y

S-1313B30-N4T1U3 1 N Z

S-1313B31-N4T1U3 1 N 1

S-1313B32-N4T1U3 1 N 2

S-1313B33-N4T1U3 1 N 3

S-1313B34-N4T1U3 1 N 4

S-1313B35-N4T1U3 1 N 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

36

2. 3 S-1313 Series C type 2. 4 S-1313 Series D type

Product Name Product Code

(1) (2) (3)

S-1313C10-N4T1U3 1 O A

S-1313C11-N4T1U3 1 O B

S-1313C12-N4T1U3 1 O C

S-1313C13-N4T1U3 1 O D

S-1313C14-N4T1U3 1 O E

S-1313C15-N4T1U3 1 O F

S-1313C16-N4T1U3 1 O G

S-1313C17-N4T1U3 1 O H

S-1313C18-N4T1U3 1 O J

S-1313C1J-N4T1U3 1 O K

S-1313C19-N4T1U3 1 O L

S-1313C20-N4T1U3 1 O N

S-1313C21-N4T1U3 1 O O

S-1313C22-N4T1U3 1 O P

S-1313C23-N4T1U3 1 O Q

S-1313C24-N4T1U3 1 O R

S-1313C25-N4T1U3 1 O S

S-1313C26-N4T1U3 1 O T

S-1313C27-N4T1U3 1 O U

S-1313C28-N4T1U3 1 O V

S-1313C2J-N4T1U3 1 O X

S-1313C29-N4T1U3 1 O Y

S-1313C30-N4T1U3 1 O Z

S-1313C31-N4T1U3 1 O 1

S-1313C32-N4T1U3 1 O 2

S-1313C33-N4T1U3 1 O 3

S-1313C34-N4T1U3 1 O 4

S-1313C35-N4T1U3 1 O 5

Product Name Product Code

(1) (2) (3)

S-1313D10-N4T1U3 1 P A

S-1313D11-N4T1U3 1 P B

S-1313D12-N4T1U3 1 P C

S-1313D13-N4T1U3 1 P D

S-1313D14-N4T1U3 1 P E

S-1313D15-N4T1U3 1 P F

S-1313D16-N4T1U3 1 P G

S-1313D17-N4T1U3 1 P H

S-1313D18-N4T1U3 1 P J

S-1313D1J-N4T1U3 1 P K

S-1313D19-N4T1U3 1 P L

S-1313D20-N4T1U3 1 P N

S-1313D21-N4T1U3 1 P O

S-1313D22-N4T1U3 1 P P

S-1313D23-N4T1U3 1 P Q

S-1313D24-N4T1U3 1 P R

S-1313D25-N4T1U3 1 P S

S-1313D26-N4T1U3 1 P T

S-1313D27-N4T1U3 1 P U

S-1313D28-N4T1U3 1 P V

S-1313D2J-N4T1U3 1 P X

S-1313D29-N4T1U3 1 P Y

S-1313D30-N4T1U3 1 P Z

S-1313D31-N4T1U3 1 P 1

S-1313D32-N4T1U3 1 P 2

S-1313D33-N4T1U3 1 P 3

S-1313D34-N4T1U3 1 P 4

S-1313D35-N4T1U3 1 P 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

37

3. HSNT-4 (1010)

12

3

4

Top view

(1) (2) (3)

(4) (5)

(1) to (3): Product code (Refer to Product name vs. Product code)

(4), (5): Lot number

Product name vs. Product code

3. 1 S-1313 Series A type 3. 2 S-1313 Series B type

Product Name Product Code

(1) (2) (3)

S-1313A10-A4T2U3 1 L A

S-1313A11-A4T2U3 1 L B

S-1313A12-A4T2U3 1 L C

S-1313A13-A4T2U3 1 L D

S-1313A14-A4T2U3 1 L E

S-1313A15-A4T2U3 1 L F

S-1313A16-A4T2U3 1 L G

S-1313A17-A4T2U3 1 L H

S-1313A18-A4T2U3 1 L J

S-1313A1J-A4T2U3 1 L K

S-1313A19-A4T2U3 1 L L

S-1313A20-A4T2U3 1 L N

S-1313A21-A4T2U3 1 L O

S-1313A22-A4T2U3 1 L P

S-1313A23-A4T2U3 1 L Q

S-1313A24-A4T2U3 1 L R

S-1313A25-A4T2U3 1 L S

S-1313A26-A4T2U3 1 L T

S-1313A27-A4T2U3 1 L V

S-1313A28-A4T2U3 1 L U

S-1313A2J-A4T2U3 1 L X

S-1313A29-A4T2U3 1 L Y

S-1313A30-A4T2U3 1 L Z

S-1313A31-A4T2U3 1 L 1

S-1313A32-A4T2U3 1 L 2

S-1313A33-A4T2U3 1 L 3

S-1313A34-A4T2U3 1 L 4

S-1313A35-A4T2U3 1 L 5

Product Name Product Code

(1) (2) (3)

S-1313B10-A4T2U3 1 N A

S-1313B11-A4T2U3 1 N B

S-1313B12-A4T2U3 1 N C

S-1313B13-A4T2U3 1 N D

S-1313B14-A4T2U3 1 N E

S-1313B15-A4T2U3 1 N F

S-1313B16-A4T2U3 1 N G

S-1313B17-A4T2U3 1 N H

S-1313B18-A4T2U3 1 N J

S-1313B1J-A4T2U3 1 N K

S-1313B19-A4T2U3 1 N L

S-1313B20-A4T2U3 1 N N

S-1313B21-A4T2U3 1 N O

S-1313B22-A4T2U3 1 N P

S-1313B23-A4T2U3 1 N Q

S-1313B24-A4T2U3 1 N R

S-1313B25-A4T2U3 1 N S

S-1313B26-A4T2U3 1 N T

S-1313B27-A4T2U3 1 N U

S-1313B28-A4T2U3 1 N V

S-1313B2J-A4T2U3 1 N X

S-1313B29-A4T2U3 1 N Y

S-1313B30-A4T2U3 1 N Z

S-1313B31-A4T2U3 1 N 1

S-1313B32-A4T2U3 1 N 2

S-1313B33-A4T2U3 1 N 3

S-1313B34-A4T2U3 1 N 4

S-1313B35-A4T2U3 1 N 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

38

3. 3 S-1313 Series C type 3. 4 S-1313 Series D type

Product Name Product Code

(1) (2) (3)

S-1313C10-A4T2U3 1 O A

S-1313C11-A4T2U3 1 O B

S-1313C12-A4T2U3 1 O C

S-1313C13-A4T2U3 1 O D

S-1313C14-A4T2U3 1 O E

S-1313C15-A4T2U3 1 O F

S-1313C16-A4T2U3 1 O G

S-1313C17-A4T2U3 1 O H

S-1313C18-A4T2U3 1 O J

S-1313C1J-A4T2U3 1 O K

S-1313C19-A4T2U3 1 O L

S-1313C20-A4T2U3 1 O N

S-1313C21-A4T2U3 1 O O

S-1313C22-A4T2U3 1 O P

S-1313C23-A4T2U3 1 O Q

S-1313C24-A4T2U3 1 O R

S-1313C25-A4T2U3 1 O S

S-1313C26-A4T2U3 1 O T

S-1313C27-A4T2U3 1 O U

S-1313C28-A4T2U3 1 O V

S-1313C2J-A4T2U3 1 O X

S-1313C29-A4T2U3 1 O Y

S-1313C30-A4T2U3 1 O Z

S-1313C31-A4T2U3 1 O 1

S-1313C32-A4T2U3 1 O 2

S-1313C33-A4T2U3 1 O 3

S-1313C34-A4T2U3 1 O 4

S-1313C35-A4T2U3 1 O 5

Product Name Product Code

(1) (2) (3)

S-1313D10-A4T2U3 1 P A

S-1313D11-A4T2U3 1 P B

S-1313D12-A4T2U3 1 P C

S-1313D13-A4T2U3 1 P D

S-1313D14-A4T2U3 1 P E

S-1313D15-A4T2U3 1 P F

S-1313D16-A4T2U3 1 P G

S-1313D17-A4T2U3 1 P H

S-1313D18-A4T2U3 1 P J

S-1313D1J-A4T2U3 1 P K

S-1313D19-A4T2U3 1 P L

S-1313D20-A4T2U3 1 P N

S-1313D21-A4T2U3 1 P O

S-1313D22-A4T2U3 1 P P

S-1313D23-A4T2U3 1 P Q

S-1313D24-A4T2U3 1 P R

S-1313D25-A4T2U3 1 P S

S-1313D26-A4T2U3 1 P T

S-1313D27-A4T2U3 1 P U

S-1313D28-A4T2U3 1 P V

S-1313D2J-A4T2U3 1 P X

S-1313D29-A4T2U3 1 P Y

S-1313D30-A4T2U3 1 P Z

S-1313D31-A4T2U3 1 P 1

S-1313D32-A4T2U3 1 P 2

S-1313D33-A4T2U3 1 P 3

S-1313D34-A4T2U3 1 P 4

S-1313D35-A4T2U3 1 P 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

Rev.2.2_00 S-1313 Series

39

4. HSNT-4 (0808)

12

3

4

Top view

(1) (2) (3)

(1) to (3): Product code (Refer to Product name vs. Product code)

Product name vs. Product code

4. 1 S-1313 Series A type 4. 2 S-1313 Series B type

Product Name Product Code

(1) (2) (3)

S-1313A10-A4T1U3 1 L A

S-1313A11-A4T1U3 1 L B

S-1313A12-A4T1U3 1 L C

S-1313A13-A4T1U3 1 L D

S-1313A14-A4T1U3 1 L E

S-1313A15-A4T1U3 1 L F

S-1313A16-A4T1U3 1 L G

S-1313A17-A4T1U3 1 L H

S-1313A18-A4T1U3 1 L J

S-1313A1J-A4T1U3 1 L K

S-1313A19-A4T1U3 1 L L

S-1313A20-A4T1U3 1 L N

S-1313A21-A4T1U3 1 L O

S-1313A22-A4T1U3 1 L P

S-1313A23-A4T1U3 1 L Q

S-1313A24-A4T1U3 1 L R

S-1313A25-A4T1U3 1 L S

S-1313A26-A4T1U3 1 L T

S-1313A27-A4T1U3 1 L V

S-1313A28-A4T1U3 1 L U

S-1313A2J-A4T1U3 1 L X

S-1313A29-A4T1U3 1 L Y

S-1313A30-A4T1U3 1 L Z

S-1313A31-A4T1U3 1 L 1

S-1313A32-A4T1U3 1 L 2

S-1313A33-A4T1U3 1 L 3

S-1313A34-A4T1U3 1 L 4

S-1313A35-A4T1U3 1 L 5

Product Name Product Code

(1) (2) (3)

S-1313B10-A4T1U3 1 N A

S-1313B11-A4T1U3 1 N B

S-1313B12-A4T1U3 1 N C

S-1313B13-A4T1U3 1 N D

S-1313B14-A4T1U3 1 N E

S-1313B15-A4T1U3 1 N F

S-1313B16-A4T1U3 1 N G

S-1313B17-A4T1U3 1 N H

S-1313B18-A4T1U3 1 N J

S-1313B1J-A4T1U3 1 N K

S-1313B19-A4T1U3 1 N L

S-1313B20-A4T1U3 1 N N

S-1313B21-A4T1U3 1 N O

S-1313B22-A4T1U3 1 N P

S-1313B23-A4T1U3 1 N Q

S-1313B24-A4T1U3 1 N R

S-1313B25-A4T1U3 1 N S

S-1313B26-A4T1U3 1 N T

S-1313B27-A4T1U3 1 N U

S-1313B28-A4T1U3 1 N V

S-1313B2J-A4T1U3 1 N X

S-1313B29-A4T1U3 1 N Y

S-1313B30-A4T1U3 1 N Z

S-1313B31-A4T1U3 1 N 1

S-1313B32-A4T1U3 1 N 2

S-1313B33-A4T1U3 1 N 3

S-1313B34-A4T1U3 1 N 4

S-1313B35-A4T1U3 1 N 5

5.5 V INPUT, 200 mA VOLTAGE REGULATOR

S-1313 Series Rev.2.2_00

40

4. 3 S-1313 Series C type 4. 4 S-1313 Series D type

Product Name Product Code

(1) (2) (3)

S-1313C10-A4T1U3 1 O A

S-1313C11-A4T1U3 1 O B

S-1313C12-A4T1U3 1 O C

S-1313C13-A4T1U3 1 O D

S-1313C14-A4T1U3 1 O E

S-1313C15-A4T1U3 1 O F

S-1313C16-A4T1U3 1 O G

S-1313C17-A4T1U3 1 O H

S-1313C18-A4T1U3 1 O J

S-1313C1J-A4T1U3 1 O K

S-1313C19-A4T1U3 1 O L

S-1313C20-A4T1U3 1 O N

S-1313C21-A4T1U3 1 O O

S-1313C22-A4T1U3 1 O P

S-1313C23-A4T1U3 1 O Q

S-1313C24-A4T1U3 1 O R

S-1313C25-A4T1U3 1 O S

S-1313C26-A4T1U3 1 O T

S-1313C27-A4T1U3 1 O U

S-1313C28-A4T1U3 1 O V

S-1313C2J-A4T1U3 1 O X

S-1313C29-A4T1U3 1 O Y

S-1313C30-A4T1U3 1 O Z

S-1313C31-A4T1U3 1 O 1

S-1313C32-A4T1U3 1 O 2

S-1313C33-A4T1U3 1 O 3

S-1313C34-A4T1U3 1 O 4

S-1313C35-A4T1U3 1 O 5

Product Name Product Code

(1) (2) (3)

S-1313D10-A4T1U3 1 P A

S-1313D11-A4T1U3 1 P B

S-1313D12-A4T1U3 1 P C

S-1313D13-A4T1U3 1 P D

S-1313D14-A4T1U3 1 P E

S-1313D15-A4T1U3 1 P F

S-1313D16-A4T1U3 1 P G

S-1313D17-A4T1U3 1 P H

S-1313D18-A4T1U3 1 P J

S-1313D1J-A4T1U3 1 P K

S-1313D19-A4T1U3 1 P L

S-1313D20-A4T1U3 1 P N

S-1313D21-A4T1U3 1 P O

S-1313D22-A4T1U3 1 P P

S-1313D23-A4T1U3 1 P Q

S-1313D24-A4T1U3 1 P R

S-1313D25-A4T1U3 1 P S

S-1313D26-A4T1U3 1 P T

S-1313D27-A4T1U3 1 P U

S-1313D28-A4T1U3 1 P V

S-1313D2J-A4T1U3 1 P X

S-1313D29-A4T1U3 1 P Y

S-1313D30-A4T1U3 1 P Z

S-1313D31-A4T1U3 1 P 1

S-1313D32-A4T1U3 1 P 2

S-1313D33-A4T1U3 1 P 3

S-1313D34-A4T1U3 1 P 4

S-1313D35-A4T1U3 1 P 5

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

2.9±0.2

1.9±0.2

0.95±0.1

0.4±0.1

0.16 +0.1

-0.06

123

4

5

No. MP005-A-P-SD-1.3

MP005-A-P-SD-1.3

SOT235-A-PKG Dimensions

mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

ø1.5 +0.1

-0 2.0±0.05

ø1.0 +0.2

-0 4.0±0.1 1.4±0.2

0.25±0.1

3.2±0.2

123

45

No. MP005-A-C-SD-2.1

MP005-A-C-SD-2.1

SOT235-A-Carrier Tape

Feed direction

4.0±0.1(10 pitches:40.0±0.2)

mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

12.5max.

9.0±0.3

ø13±0.2

(60°) (60°)

QTY. 3,000

No. MP005-A-R-SD-1.1

MP005-A-R-SD-1.1

SOT235-A-Reel

Enlarged drawing in the central part

mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

0.3 +0.1

-0.05

0.4 +0.1

-0.05

0.05

12

43

0.16 +0.1

-0.06

1.3±0.2

2.0±0.2

No. NP004-A-P-SD-2.0

SC82AB-A-PKG Dimensions

NP004-A-P-SD-2.0

mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

1.1±0.1

0.2±0.05

4.0±0.1

2.0±0.05

4.0±0.1

2.2±0.2

(0.7)

No. NP004-A-C-SD-3.0

NP004-A-C-SD-3.0

SC82AB-A-Carrier Tape

Feed direction

12

34

ø1.05±0.1

ø1.5 +0.1

-0

mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

No. NP004-A-C-S1-2.0

NP004-A-C-S1-2.0

SC82AB-A-Carrier Tape

4.0±0.1 2.0±0.1

4.0±0.1 ø1.05±0.1

0.2±0.05

1.1±0.1

Feed direction

2.3±0.15

12

34

ø1.5 +0.1

-0

mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

QTY. 3,000

NP004-A-R-SD-1.1

SC82AB-A-Reel

mm

No. NP004-A-R-SD-1.1

12.5max.

9.0±0.3

ø13±0.2

(60°) (60°)

Enlarged drawing in the central part

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

mm

HSNT-4-B-PKG Dimensions

PL004-A-P-SD-1.1

No. PL004-A-P-SD-1.1

12

4

0.20±0.05

0.65

1.00±0.04

3

0.38±0.02

0.08+0.05

-0.02

The heat sink of back side has different electric

potential depending on the product.

Confirm specifications of each product.

Do not use it as the function of electrode.

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

mm

PL004-A-C-SD-2.0

Feed direction

4.0±0.05

ø1.5

ø0.5

1.12±0.05 0.5±0.05

0.25±0.05

1

2

34

No. PL004-A-C-SD-2.0

2.0±0.05

+0.1

-0

+0.1

-0

HSNT-4-B-Carrier Tape

2.0±0.05

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

QTY. 10,000

No. PL004-A-R-SD-1.0

PL004-A-R-SD-1.0

mm

HSNT-4-B-Reel

11.4±1.0

9.0

ø13±0.2

(60°) (60°)

Enlarged drawing in the central part

+1.0

- 0.0

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

mm

HSNT-4-B

-Land Recommendation

PL004-A-L-SD-2.0

No. PL004-A-L-SD-2.0

0.38~0.48

0.30min.

(1.02)

0.65±0.02

Land Pattern

Metal Mask Pattern

Caution It is recommended to solder the heat sink to a board

in order to ensure the heat radiation.

PKG

0.38~0.48

0.07

Aperture ratio

100%

40%

t0.10mm ~ 0.12 mm

Caution Mask aperture ratio of the lead mounting part is 100%.

Mask aperture ratio of the heat sink mounting part is 40%.

Mask thickness: t0.10mm to 0.12 mm

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

mm

HSNT-4-A-PKG Dimensions

PK004-A-P-SD-2.1

No. PK004-A-P-SD-2.1

0.08

0.38±0.02

0.20±0.05

0.40

0.80±0.04

+0.05

-0.02

The heat sink of back side has different electric

potential depending on the product.

Confirm specifications of each product.

Do not use it as the function of electrode.

12

43

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

mm

PK004-A-C-SD-3.0

HSNT-4-A-Carrier Tape

Feed direction

4.0±0.05

2.0±0.05

ø1.5 +0.1

-0

ø0.5

0.93±0.05

1

2

34

No. PK004-A-C-SD-3.0

2.0±0.05

0.5±0.05

0.25±0.05

+0.1

-0

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

QTY. 10,000

No. PK004-A-R-SD-2.0

PK004-A-R-SD-2.0

mm

HSNT-4-A-Reel

11.4±1.0

9.0

ø13±0.2

(60°) (60°)

Enlarged drawing in the central part

+1.0

- 0.0

No.

TITLE

UNIT

ANGLE

ABLIC Inc.

mm

HSNT-4-A

-Land Recommendation

PK004-A-L-SD-3.0

No. PK004-A-L-SD-3.0

0.27~0.32

0.22min.

Land Pattern

Metal Mask Pattern

(0.82)

0.40±0.02

0.05

Caution It is recommended to solder the heat sink to a board

in order to ensure the heat radiation.

PKG

Aperture ratio

100%

40%

t0.10mm ~ 0.12 mm

Caution Mask aperture ratio of the lead mounting part is 100%.

Mask aperture ratio of the heat sink mounting part is 40%.

Mask thickness: t0.10mm to 0.12 mm

Disclaimers (Handling Precautions)

1. All the information described herein

(product data,

specifications,

figures,

tables,

programs,

algorithms and application

circuit examples,

etc.)

is current as of publishing date of this document and is subject to change without notice.

2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of

any specific mass-production design.

ABLIC Inc. is not responsible for damages caused by the reasons other than the products described herein

(hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use

of the information described herein.

3. ABLIC Inc. is not responsible for damages caused by the incorrect information described herein.

4. Be careful to use the products within their specified ranges. Pay special attention to the absolute maximum ratings,

operation voltage range and electrical characteristics, etc.

ABLIC Inc. is not responsible for damages caused by failures and / or accidents, etc. that occur due to the use of the

products outside their specified ranges.

5. When using the products, confirm their applications, and the laws and regulations of the region or country where they

are used and verify suitability, safety and other factors for the intended use.

6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related

laws, and follow the required procedures.

7. The products must not be used or provided (exported) for the purposes of the development of weapons of mass

destruction or military use. ABLIC Inc. is not responsible for any provision (export) to those whose purpose is to

develop, manufacture, use or store nuclear, biological or chemical weapons, missiles, or other military use.

8. The products are not designed to be used as part of any device or equipment that may affect the human body, human

life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control

systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,

aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do

not apply the products to the above listed devices and equipments without prior written permission by ABLIC Inc.

Especially, the products cannot be used for life support devices, devices implanted in the human body and devices

that directly affect human life, etc.

Prior consultation with our sales office is required when considering the above uses.

ABLIC Inc. is not responsible for damages caused by unauthorized or unspecified use of our products.

9. Semiconductor products may fail or malfunction with some probability.

The user of the products should therefore take responsibility to give thorough consideration to safety design including

redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or

death, fires and social damage, etc. that may ensue from the products' failure or malfunction.

The entire system must be sufficiently evaluated and applied on customer's own responsibility.

10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the

product design by the customer depending on the intended use.

11. The products do not affect human health under normal use. However, they contain chemical substances and heavy

metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be

careful when handling these with the bare hands to prevent injuries, etc.

12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.

13. The information described herein contains copyright information and know-how of ABLIC Inc.

The information described herein does not convey any license under any intellectual property rights or any other

rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any

part of this document described herein for the purpose of disclosing it to a third-party without the express permission

of ABLIC Inc. is strictly prohibited.

14. For more details on the information described herein, contact our sales office.

2.2-2018.06

www.ablic.com