1
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
2008.12w
■Features
1.
Supports High-Speed LAN Transmission
Conforms to requirements of TIA/EIA-568B data
wiring standard, meeting transmission performance
of Enhanced Category 5.
Supports Gigabit Ethernet (1000BASE-T) and Fast
Ethernet (100BASE-TX) high-speed LAN
transmission.
2. EMI protection (TM21*P-88P)
360°coverage of the engagement area with a metal
shield assures protection against electromagnetic
interference. When mated with corresponding
connector the shield surfaces are securely
connected to provide continuous circuit.
3. Protected latch tab (TM21P-88P)
Flexible case extends over the release tab
preventing the possibility of breaking-off during
handling of the complete cable assembly.
4. Termination of conductors
Self located 24 AWG conductors (solid or stranded)
are terminated against pre-inserted contacts using
simple tooling.
5. Simplified termination (TM21*P-88P)
Removeable one piece cover allows easy access to
the termination areas.
6. Conforms to the ISO 8877 Standard
(ISDN Interface Connector)
■Applications
Telecom Hubs, Routers, Bridges and ATM
Transmission Equipment, Ethernet Switches and
Networking Equipment, Test and Measurement
Equipment and other equipment requiring this type of
simple and reliable connection.
TM21P Series (Shielded Type) TM22P-88P (Non-shielded Type)
1
Protected latch tab
Cover Installation Procedure
2
1
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
■Product Specification
Rating Current rating 1A
Voltage rating 125 V AC Operating temperature range-25çto +60ç(Note)
■Materials
Insulator Polycarbonate Color: Clear UL94V-2
Contacts Copper alloy Contact area: Gold plating -------
Shield Copper alloy Tin plating -------
Conductor holding tray Polycarbonate Color: Clear UL94V-2
Cover Polyamide Color: Light beige (Note) UL94V-2
Part Material Finish Remarks
Note :Includes temperature rise caused by current flow.
Item Specification Conditions
1. Insulation resistance 100 M ohms min. 100 V DC
2. Withstanding voltage No flashover or insulation breakdown 500 V AC / one minute
(between adjacent contacts)
3. Withstanding voltage No flashover or insulation breakdown 1500 V AC / one minute
(between contact and shield)
4. Contact resistance 230 m ohms max. 100mA DC
5. Vibration No electrical discontinuity of 5 ms or more
Contact resistance: 250m ohms max.
6. Shock No electrical discontinuity of 5 ms. min.
Contact resistance: 250m ohms max.
7. Durability Contact resistance: 250m ohms max. 200
(mating/un-mating)
8. Temperature cycle Contact resistance: 250 m ohms max.
Insulation resistance: 100 M ohms min.
9. Humidity Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
500 hours at temperature of 40çand humidity of 90% to 95%
Insulation resistance: 10 M ohms min. (Dry state)
10. Salt Spray Contact resistance: 250 m ohms max. Exposed to density 5% salt water for 48 hours
Temperature: -55
ç
/+5
ç
to +35
ç
/+85
ç
/+5
ç
to +35
ç
Duration: 30/5/30/5(Minutes)
5 cycles
Acceleration of 490 m/s
2
, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours / 3 axis
Note :Cover available in various colors. Refer to page 3.
■Ordering information
Series name TM21P: Shielded
Cover Type
Blank: Protective latch cover
C: Short cover
Size 8: For 8 contacts
Inserted contacts 8P: 8
1
2
3
4
TM21 C P - 8 8P
1 2 1 3 4
●Plugs- Shielded
Series name TM22P : Non-shielded
Size 8 : For 8 contacts
Inserted contacts 8P: 8
1
2
3
TM22P - 8 8P
1 32
●Plugs - Non-shielded
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
●Shielded
■Plug Connectors
Part Number CL No.
TM21P-88P
TM21P-88P(02)
TM21P-88P(03)
TM21P-88P(04)
TM21P-88P(05)
TM21P-88P(06)
TM21P-88P(07)
TM21P-88P(08)
TM21P-88P(09)
Cover Color RoHS
Light beige
Medium gray
Black
Natural light gray
Red
Green
Blue
Yellow
Orange
YES
222-2862-9-02
222-2862-9-02
222-2862-9-03
222-2862-9-04
222-2862-9-05
222-2862-9-06
222-2862-9-07
222-2862-9-08
222-2862-9-09
(44.65)(13.4)
(34)
Contact No.8Contact No. 1
29.5
9
16.6
(34)
(R3.5)
6.7
Conductor holding tray
Cover
30.2
12.9
6.6
(0.6)
17.5
6.09
11.7
9.05
5.4
3.45
BCover installed B
Mated with corresponding receptacle
(shown for reference only)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
4
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
BCover installed
BApplicable Shielded Cable Specifications
B
Mated with corresponding receptacle
(shown for reference only)
Note: For cable termination procedures refer to:
[TM21P-88P Cable Termination Procedure Manual](ETA-E2349) and [TM21CP-88P Cable termination Procedure Manual]
(ETA-E2353).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
■Plug Connectors
Note: For other colors contact Hirose sales representative.
(13.4 ) (32.35)
TM21CP-8
(21.7)
TM21CP-8
Part Number CL No.
TM21CP-88P(03)
Cover color RoHS
Black YES222-2884-1-03
Specifications
Solid copper conductor: 0.5mm dia.
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
(0.9mm to 1.0mm)
AWG#26 (tin coated)
(dia. 6.6mm)
Conductor
Individual conductor insulation dia.
Drain wire
Overall jacket dia.
●Shielded-Short Cover
Jacket Shield
Conductor
Insulation
Drain wire
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Specifications
Solid copper conductor: 0.5mm dia.
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
(0.9mm to 1.0mm)
(dia. 5.4mm to 5.7mm)
Conductor
Individual conductor insulation dia.
Overall jacket dia.
Insulation
Jacket
Conductor
BMated with corresponding receptacle (shown for reference only)
BApplicable Non-shielded Cable Specifications
Note: For cable termination procedures refer to:
[TM22P-88P Cable Termination Procedure Manual](ETA-E2381).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
(11.85)
■Plug Connectors
Part Number CL No. RoHS
TM22P-88P 222-2899-9 YES
●Non-shielded
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
BHand termination tools
Part Number CL No. Applicable connector
HT601 / TM21P-88P 902-2133-1 TM21P-88P
TM21CP-88P
●For contact/conductor termination (For cable and shield crimping)
●For contact/conductor termination (Non-shielded connectors)
Part Number CL No. Applicable connector
HT601-TM23/22P-88P CL902-2128-1 TM22P-88P
TM23P-88P
HRS marking side
(For contact/conductor termination)
A
Reverse side
(For cable strain relief clamp crimping)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
7
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
BTechnical Documentation
●CAT5e Transmission Characteristics Data
These are the representative values of the various transmission characteristics data for connector assemblies
TM21P-88P and TM21R-5C-88-LP when fully mated.
(Each two numbers are for the pair of individual contact position.)
• Signal Attenuation
0
0.1
0.2
0.3
0.4
0.5
0102030405060708090100
Frequency(MHz)
Attenuation(dB)
1,2 3,6 4,5 7,8 CAT5e Spec
0
20
40
60
80
100
120
0102030405060708090100
Frequency(MHz)
NEXT(dB)
1,2-3,6 1,2-4,5 1,2-7,8 3,6-4,5 3,6-7,8 4,5-7,8 CAT5e Spec
• Near-End Crosstalk Atten uation (NEXT)
0
20
40
60
80
0102030405060708090100
Frequency(MHz)
Return Loss(dB)
1,2 3,6 4,5 7,8 CAT5e Spec
• Return Loss
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
8
TM21P Series●Modular Plug Connectors Compliant to Enhanced Category 5 Standards
• Far-End Crosstalk Attenuation (FEXT)
0
20
40
60
80
100
120
0102030405060708090100
Frequency(MHz)
FEXT(dB)
1,2-3,6
3,6-4,5
4,5-7,8
CAT-5e Spec
3,6-1,2
4,5-3,6
7,8-4,5
1,2-7,8
4,5-1,2
7,8-3,6
1,2-4,5
3,6-7,8
7,8-1,2
0
0.5
1
1.5
2
2.5
3
0102030405060708090100
Frequency(MHz)
Delay(ns)
1,2 3,6 4,5 7,8 CAT5e Spec
• Propagation Dela y
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0102030405060708090100
Frequency(MHz)
Delay Skew(ns)
Measurement Value CAT5e Spec
• Propagation Dela y skew
(Each two numbers are for pair of individual contact position.)
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.