188
LEADED
®
NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com
EPOXY COATED, NON-INDUCTIVE, CAPACITORS,
REDUCED SIZE, RADIAL LEAD
FEATURES
• NON-INDUCTIVE CONSTRUCTION
• EPOXY RESIN COATED FOR EXCELLENT MOISTURE RESISTANCE
• METALLIZED CONTRUCTION PROVIDE SELF HEALING CHARACTERISTICS
• HIGH STABILITY WITH FREQUENCY OVER AN EXTENDED OPERATING LIFE
• HIGH PERFORMANCE AT LOW COST
• REDUCED SIZE
• LEAD FORMING AND CUT LEADS AVAILABLE
SPECIFICATIONS
STANDARD PRODUCTS AND CASE SIZE TABLE (mm) LEAD SPACING AND DIAMETER
(paC µ)F egatloVgnikroW
CAV36/CDV001 CAV061/CDV052 CAV002/CDV004 CAV022/CDV036
L T H L T H L T H L T H
010.0 5.21 0.5 5.8
510.0 5.21 5.5 5.8
220.0 5.21 5.5 5.01
330.0 5.21 5.6 0.11
740.0 5.21 5.5 5.8 5.21 5.7 0.21
860.0 5.21 0.6 0.01 5.81 5.6 5.11
01.0 5.21 0.7 0.11 5.81 0.7 0.21
51.0 5.81 5.5 0.21 5.81 0.8 0.51
22.0 5.21 5.8 5.01 5.81 5.6 0.31 5.81 5.9 5.71
33.0 5.21 0.7 0.21 5.81 5.7 0.41 0.62 5.8 0.81
74.0 5.81 0.6 5.21 5.81 5.8 5.61 0.62 5.01 5.81
86.0 5.21 5.6 5.01 5.81 0.7 5.31 0.62 5.7 0.71 0.62 0.21 0.22
0.1 5.21 0.7 0.21 5.81 0.8 0.81 0.62 5.8 5.81 0.13 5.31 0.22
5.1 5.81 5.8 0.31 5.81 5.9 5.71 0.13 5.9 0.91 0.13 5.81 0.52
2.2 5.81 5.7 5.51 0.62 0.9 5.71 0.13 5.11 5.12 0.13 0.02 0.92
3.3 5.81 0.9 5.61 0.62 0.11 5.91
7.4 0.62 0.8 5.61 0.62 5.21 5.22
8.6 0.62 5.9 5.71 0.13 0.41 5.22
0.01 0.62 0.11 0.12 0.13 0.61 5.82
erutarepmeTgnitarepO 4-°0C°58+otC
)CD(egatloVdetaR V036,V004,V052,V001
egnaRecnaticapaC 10.0µ0.01otFµF
ecnareloTecnaticapaC +,)K(%01+)J(%5
ecnatsiseRnoitalusnI 33.<CµR,F> mhogeM000,9sC°52@
C> 33. µR,F> 000,3smhogeM/µF
rotcaFnoitapissiD C°52/zhK1@.xam%1
htgnertScirtceleiD .ces5rofegatlovdetarfo%051
Metallized Polyester Film Capacitors NRM-S Series
L 5.21 0.81 0.62 0.13
S 0.01 0.51 5.22 5.72
d∅6.0 8.0 8.0 8.0
105K250 F2
Capacitance code in pF, first two digits are
significant, third digit is no . of zeros.
E.G. 102 = .001µF, 103 = .01µF, 104 = .1µF
Tolerance Code J = ±5%, K = ±10%
Voltage (VDC)
Special Lead Forming
PART NUMBER
NRM-S
Series S + 1mm
*2mm max. L > 20mm
1.5mm max. L < 20mm
L
dφφ
φφ
φ
LL = 25mm min.
H
T
