INCH-POUND MIL-DTL-83723/75E w/AMENDMENT 1 20 April 2011 SUPERSEDING MIL-DTL-83723/75E 19 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, (BAYONET COUPLING, CRIMP SOCKET CONTACT), (SERIES III, CLASSES A, G, K, M, R, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. ___ 1.230 MAX .015 R MAX ----.-1 .678 MAX (REF) .320 MIN G DIA MIN SHELL ID 4 .200 MIN TOTAL KNURL LENGTH MARKING LOCATION OPTIONAL I DIA MAX FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 MIL-DTL-83723/75E w/AMENDMENT 1 .383 -----.366 ______ .185 .552 MIN .170 .182 .177 DETAIL T COUPLING RING REMOVED FOR CLARITY NO 20 .o95 DIA . .092 SEE NOTE 5 NO. 20 :; ;~ DIA .107 .093 150 DIA NO. 16 *.154 NO. 12 :~6~ .105 INSULATOR .054 FACE TO CONTACT FRONT DIA DETAILS G dia min H dia 8 A dia max ins .312 .352 10 .388 .428 12 .558 .598 14 .627 .667 16 .772 .794 18 .860 .900 20 .985 1.025 22 1.110 1.150 24 1.235 1.275 .415 .424 .517 .526 .687 .696 .756 .765 .883 .892 .989 .998 1.114 1.123 1.239 1.248 1.364 1.373 Shell size J dia L dia min U dia max V .540 .545 .662 .667 .832 .837 .901 .906 1.028 1.033 1.134 1.139 1.261 1.266 1.384 1.389 1.511 1.516 .632 .776 .025 .760 .906 .031 .930 1.078 .031 .999 1.141 .031 1.126 1.266 .031 1.232 1.375 .031 1.357 1.510 .031 1.482 1.625 .031 1.607 1.760 .031 FIGURE 1. Dimensions and configurations - Continued. 2 MIL-DTL-83723/75E w/AMENDMENT 1 Inches mm Inches mm Inches mm Inches mm Inches mm .015 .025 .031 .035 .051 .054 .076 .092 .093 .096 .105 .107 .114 .118 .125 .146 .150 .170 .177 .182 0.38 0.64 0.79 0.89 1.30 1.37 1.93 2.34 2.36 2.44 2.67 2.72 2.90 3.00 3.18 3.71 3.81 4.32 4.50 4.62 .185 .200 .206 .210 .312 .320 .352 .366 .383 .388 .415 .424 .428 .517 .526 .540 .545 .552 .558 .598 4.70 5.08 5.23 5.33 7.92 8.13 8.94 9.30 9.73 9.86 10.54 10.77 10.87 13.13 13.36 13.76 13.84 14.02 14.17 15.19 .627 .632 .662 .667 .678 .687 .696 .756 .760 .765 .772 .776 .794 .832 .837 .860 .883 .892 .900 .901 15.93 16.05 16.81 16.94 17.22 17.45 17.68 19.20 19.30 19.43 19.61 19.71 20.17 21.13 21.26 21.84 22.43 22.66 22.86 22.89 .906 .930 .985 .989 .998 1.025 1.028 1.033 1.078 1.110 1.114 1.123 1.126 1.134 1.139 1.141 1.150 1.230 1.232 1.235 23.01 23.62 25.02 25.12 25.35 26.04 26.11 26.24 27.38 28.19 28.30 28.52 28.60 28.80 28.93 28.98 29.21 31.24 31.29 31.37 1.239 1.248 1.261 1.266 1.275 1.364 1.373 1.375 1.384 1.389 1.482 1.510 1.511 1.516 1.607 1.625 1.760 31.47 31.70 32.03 32.16 32.39 34.65 34.87 34.93 35.15 35.28 37.64 38.35 38.38 38.51 40.82 41.28 44.70 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 inches (0.13 mm) for three place decimals, .01 inches (0.25 mm) for two place decimals and 1o for all angles. 4. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 5. See table I for contact cavities requiring this dimension. FIGURE 1. Dimensions and configurations - Continued. 3 MIL-DTL-83723/75E w/AMENDMENT 1 REQUIREMENTS: Dimensions and configurations: See figure 1. For insert arrangements, see MIL-STD-1554 and table I. TABLE I. Inserts requiring reduced diameters for lead-in chamfers on contact cavities. Shell size 8 10 Insert Arrangements 03 06 Contact cavities 1, 2, 3 1, 2, 3, 4, 5, 6 For connector accessories: See SAE-AS85049. This connector mates with MIL-DTL-83723/72, /74, /80, /81, /93 and /94. Part or Identifying Number (PIN) example: M83723/ 75 W 22 55 N J Military designator Specification sheet number Class Shell size Insert arrangement Polarizing position Amendment Notations. The margins of this specification are marked with vertical lines to indicate modifications generated by this amendment. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MIL-DTL-83723/72 MIL-DTL-83723/74 MIL-DTL-83723/80 MIL-DTL-83723/81 MIL-DTL-83723/93 MIL-DTL-83723/94 MIL-STD-1554 SAE-AS85049 4 MIL-DTL-83723/75E w/AMENDMENT 1 CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2011-017) Review activities: Army - AR, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil. 5