A128
1mm Pitch Connector for Vertical Connection
FX5 Series
■Features
1. Header Side : 2 Types Available
Two header types, low profile and high profile, are prepared
according to the contact number variation and the connecting
height variation, considering unit connections of HDD, FDD, CD-
ROM and so on.
2. Two-stages Sequential Structure
The connecting sequence is designed with 2 stages so that the
end user side can maintain.
3. Mating Guide
In the connecting process, the self-alignment is ±1mm high
sufficient to the guide level, and the guide rib is provided to
achieve easy mating.
4. SMT Coplanarity
The coplanarity of SMT soldered area secures the high accuracy
of 0.1mm.
5. Miniaturization
The connector is miniaturized about 30% in the mounting area,
compared with the conventional half pitch connector (1.27mm).
■Applications
Note PC , other business equipments
FX5_*P_SH
FX5_*S2A_DSA
PCB
( 3.6 )
PCB
6.6
FX5_*P_SH3
FX5_*S2A_DSA
()
Connecting Height: Low profile
Connecting Height: High profile
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A129
FX5 Series●1mm Pitch Connector for Vertical Connection
1. Insulation Resistance 100M ohms min. 250V DC
2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute
3. Contact Resistance 50m ohms max. 100mA
4. Vibration No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Moisture Resistance
Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance: 60m ohms max. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
Insulation resistance: 100M ohms min. (-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles
7.
Durability (Mating/un-mating)
Contact resistance: 60m ohms max. 500 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
■Product Specifications
Rating Current rating 0.5A
Operating Temperature Range -55çto +85ç(Note 1)
S
torage Temperature Range -10çto +60ç(Note 2)
Voltage rating 100V AC
Operating Humidity Range
40% to 80% Storage Humidity Range 40% to 70%
Item Specifications Condition
SMT
Reflow: At the recommended temperature profile
Manual soldering: 360ç for 5 seconds
DIP Solder Bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Insulator Polyamide Beige UL94V-0
Header Contact Brass Contact area : Gold plated ________
Receptacle Contact Phosphor bronze Lead area : Tin plated ________
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
Note : The black dots on the insulater will not affect performance.
Note: The 56 contact header is for SH 3 type only.
■Material
Part Material Finish Remarks
■Ordering Information
●Header
tConnector Height
Blank : 6.5mm
3 : 9.5mm
qSeries Name : FX5
wNumber of Contacts : 20, 40, 52, 56, 68, 80
eConnector Type P: Header
rContact type
SH : Right angle SMT type
FX5 – *P – SH 3
●Receptacle
yContact type
DSA : Straight through hole type
uBoard prefixed pin
Blank : Without board prefixed pin
L : With board Prefixed pin
qSeries Name : FX5
wNumber of Contacts : 20, 40, 52, 56, 68, 80
eConnector Type S: Receptacle
rContact Sequence
2 : 2 Stages Sequence
tSerial No. : A
FX5 – *S 2 A – DSA L
qtrew
qtrewyu
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
YES
RoHS
A130
FX5 Series●1mm Pitch Connector for Vertical Connection
FX5-20P-SH(71) 575-0001-7-71 20 9 24 22.9 19 9.5 20 13.6
FX5-20P-SH3(71) 575-0041-1-71
FX5-40P-SH(71) 575-0005-8-71 40 19 34 32.9 29 19.5 30 23.6
FX5-40P-SH3(71) 575-0045-2-71
FX5-52P-SH(71) 575-0006-0-71 52 25 40 38.9 35 25.5 36 29.6
FX5-52P-SH3(71) 575-0046-5-71
FX5-56P-SH3(71) 575-1001-2-71 56 27 42 40.9 37 27.5 38 31.6
FX5-68P-SH(71) 575-0008-6-71 68 33 48 46.9 43 33.5 44 37.6
FX5-68P-SH3(71) 575-0048-0-71
FX5-80P-SH(71) 575-0009-9-71 80 39 54 52.9 49 39.5 50 43.6
FX5-80P-SH3(71) 575-0049-3-71
b2
a2
a2
b2
1
A
6.5±0.3
6±0.3 (0.5
)
a1
b1
a*
b*
Polarity Mark
D±0.3
B±0.3
0.5
E
F±0.3
a1
b1
b*
a*
1.7±0.3
9.3±0.3
C±0.5
10
_0.2
2.5±0.3
1.4±0.3
( Ø1.3 ) t0.2±0.05∞w0.2±0.05
2_Ø2.3±0.15
G±0.1
2.5±0.3
3.2±0.2
6.35±0.3
( 1.3 )
a2
b2
a2
b2
1
A
C±0.5
1.7±0.3
9.5±0.3
6±0.3 (3.5)
a1
b1
a*
b*
9.3±0.3
Polarity Mark
D±0.3
B±0.3
0.5
E
F±0.3
a1
b1
b*
a*
(Ø1.3 )t0.2±0.05∞w0.2±0.05
3.2±0.2
G±0.1
2.5±0.3
6.35±0.3
2_Ø2.3±0.15
(1.3)
10
_0.2
2.5±0.3
1.4±0.3
*
*
a1 b1
a1 b1
**
*== (number of contacts)/2
Unit: mm
Part Number CL No.
Number of Contacts
ABCDEFG
■Header High profileLow profile
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
YES
RoHS
A131
FX5 Series●1mm Pitch Connector for Vertical Connection
Unit: mm
FX5-20S2A-DSA(71) 575-0101-1-71 20 9 19 15.08 __ a1,a2,a9,a10 a3 to a8
FX5-20S2A-DSAL(71) 575-0121-9-71 15 b1,b2,b9,b10 b3 to b8
FX5-40S2A-DSA(71) 575-0105-2-71 40 19 29 25.08 __ a1,a2,a19,a20 a3 to a18
FX5-40S2A-DSAL(71) 575-0125-0-71 25 b1,b2,b19,b20 b3 to b18
FX5-52S2A-DSA(71) 575-0106-5-71 52 25 35 31.08 __ a1,a2,a25,a26 a3 to a24
FX5-52S2A-DSAL(71) 575-0126-2-71 31 b1,b2,b25,b26 b3 to b24
FX5-56S2A-DSA(71) 575-0107-8-71 56 27 37 33.08 __ a1,a2,a27,a28 a3 to a26
FX5-56S2A-DSAL(71) 575-0127-5-71 33 b1,b2,b27,b28 b3 to b26
FX5-68S2A-DSA(71) 575-0108-0-71 68 33 43 39.08 __ a1,a2,a33,a34 a3 to a32
FX5-68S2A-DSAL(71) 575-0128-8-71 39 b1,b2,b33,b34 b3 to b32
FX5-80S2A-DSA(71) 575-0109-3-71 80 39 49 45.08 __ a1,a2,a39,a40 a3 to a38
FX5-80S2A-DSAL(71) 575-0129-0-71 45 b1,b2,b39,b40 b3 to b38
■Receptacle
0.6±0.3
E – E F – F
4.25±0.2
6±0.3
a2 1
B ±0.3
C
E
E
F
F
A ±0.2
a1
b1
b2
a*
b*
a1
* = (number of contacts)/2
+0.1
–
0.2
5.9±0.2
3.4±0.3
3.3±0.3
D ±0.3 1.5±0.21.5±0.2
1.5±0.2
3±0.3
Polarity Mark
t0.25±0.03xw0.4±0.05
**
b1
Part Number CL No.
Number of Contacts
ABCD
Order of Contact Sequence(Contact No.)
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A132
FX5 Series●1mm Pitch Connector for Vertical Connection
BPCB mounting pattern
●Header
FX5-*-SH, FX5-*-SH3
●Receptacle
FX5-*S2A-DSA
FX5-*S2A-DSAL
(5.95)
3.15±0.12.55±0.1
2.1±0.1
a1
b1
b2
a2
(Polarity mark position)
(Mating side)
4±0.1
2.05±0.05
0.5±0.02
C ±0.05
2.15±0.1
3.4±0.1
B ±0.05
A ±0.1 4±0.1
0.3±0.03 (Land pattern)
0.25±0.03 (Metal mask)
a*
b*
D±0.1 * = (number of contacts)/2
2
-
Ø2.3
2
-
Ø1.4±0.05
+0.1
0
(Polarity mark position)
* = (number of contacts)/2
Ø0.6 b*
a*
E ±0.1
1±0.05
a2
a1
a3
a4
b1 b4
b3b2 +0.1
0
1.5±0.051.5±0.05
1.5±0.05
* = (number of contacts)/2
2
-
Ø2.3
a*
F ±0.1
E ±0.1
1±0.05
3±0.05
a2
(Polarity mark position)
a1
a3
a4
Ø0.6 b*
b1 b4
b3b2 +0.1
0
+0.1
0
1.5±0.05 1.5±0.05
1.5±0.05
Number of Contacts
ABCDEF
20 16 13.6 9.5 20 9 15
40 26 23.6 19.5 30 19 25
52 32 29.6 25.5 36 25 31
56 34 31.6 27.5 38 27 33
68 40 37.6 33.5 44 33 39
80 46 43.6 39.5 50 39 45
Note: If the connector is installed in the board beyond the above recommended size, it may cause the connector to board mounting failure
or the soldering failure. It is desirable to implement the board process on the recommended PCB mounting pattern.
Unit: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A133
FX5 Series●1mm Pitch Connector for Vertical Connection
BRecommended Temperature Profile
BCleaning Conditions
150ç
200ç
Soldering Time
(220ç min.)
140
180
220
0
160
200
(MAX240ç)
240
260
(90 to 120s)
(MAX 60s)
Pre-heating time
(150 to 200ç)
Time (s)
Temperature (ç)
1. Organic Solvent Cleaning
IPA (Isopropyl alcohol)
HCFC (Hydrochlorophloro carbon)
Solvent Cold Cleaning Heat Cleaning
*Methylene chroride isn't suitable for this product solvent.
2. Liquid Cleaning
When liquid detergents (such as terpene, alkali saponifier) are used, please select the cleaning detergent according to the
influence table on metal or resin which is issued from each detergent manufacturer.In addition, please do not leave the
connector outdoor, in which moisture remains.
3. Cautions for Cleaning
As for organic solvent or liquid cleaning, if flux or detergent remains on the connector, it can cause electrical performance
degradation. Therefore, please make sure that the connector is thoroughly cleaned so that neither flux nor detergent is found
on the connector.
HRS test conditions
Test boardGlass epoxy 110mm∞40mm∞1.6mm thick
Solder method :Reflow
Solder composition :Paste,
96.5%Sn/3%Ag/0.5%Cu
Metal mask : 0.15mm thick
Reflow cycles : 1 cycles
The temperature profile is based on the above
conditions.
In individual applications the actual temperature may
vary, depending on solder paste type,
volume/thickness and board size/thickness. Consult
your solder paste and equipment manufacturer for
specific recommendations.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A134
FX5 Series●1mm Pitch Connector for Vertical Connection
1
PCB
(3.6)
FX5-πP-SH
Nut (M2)
Plain sheet (t = 0.3) Board (t = 1.6)
Spring sheet (t = 0.5)Screw (M2)
FX5-*P-SH3
(6.6)
PCB
BConnector Precautions
1. Tolerance Clearance on Mating Side
The effective connection clearance of the product is 1.6mm. Please use the
product so as to specify within 1mm the clearance between the header and
the receptacle in the connection process.
2. Header Connector Height
The SMT connector height doesn't include the solder paste thickness.
Thus, please consider that the stacking height will slightly increase after the
mounting process.
3. Screw Fastening Torque (SMT Type)
When the screw is fastened, please use the M2 screw. The recommended
fastening torque is 0.15(N.m) max.
5. Plug and Play
When the connector is inserted or extracted in the active line state, please
contact HRS company.
6. Others
4. Prefixed Process to Board (Through hole Type)
If the prefixed process is required for board mounting, please use the
prefixed pin type. (Applicable Thickness t = 1.6±0.1)
Note:
When the connector is mounted on the board, the dip post is guided into the
board through-hole in order to prevent the dip post damage, and then insert
the board in parallel to the connector so as to push in the prefixed pin.
Mating Height: Low profile Mating Height: High profile
●It is noted that the forced excessive insertion/extraction will result in damage.
●Avoid holding the board with the connector only, and fix the board by any other
means except for the connector.
●The color phase of this product may be slightly different from that of the forming
product according to the manufacturing lot, but the difference doesn't affect the
performance.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.