https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 4-pos., M12 SPEEDCON, shielded, A-coded, rear/screw mounting with Pg9 thread, with straight solder connection, design with 12 mm long solder pins Your advantages Easy PCB assembly: one-piece connectors for wave soldering All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design SPEEDCON fast locking system reduces cabling times For high transmission reliability: optional shield connection to the housing by means of shield contact Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4046356294768 Weight per Piece (excluding packing) 14.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 12 mm Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) -40 C ... 85 C (without mechanical actuation) 08/24/2020Page1/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Technical data Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Standards and Regulations Standards/specifications M12 connector IEC61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years 08/24/2020Page2/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Technical data Environmental Product Compliance For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Dimensional drawing Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) 08/24/2020Page3/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Drilling diagram Drilling diagram 08/24/2020Page4/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Dimensional drawing M12 SPEEDCON flush-type plug 08/24/2020Page5/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Dimensional drawing 08/24/2020Page6/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Schematic diagram Pin assignment M12 plug, 4-pos., A-coded, view plug side Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 08/24/2020Page7/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Classifications eCl@ss eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Nominal voltage UN 250 V Nominal current IN 4A FILE E 118976 08/24/2020Page8/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Approvals mm/AWG/kcmil 22 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616 Nominal voltage UN 250 V Nominal current IN 4A mm/AWG/kcmil 22-20 Accessories Accessories Protective cap Sealing cap-PROT-M12 FS-1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Sealing cap-PROT-M12 FS-M-1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Seal 08/24/2020Page9/10 https://www.phoenixcontact.com/us/products/1558535 Flush-type connector-SACC-DSI-MS-4CON-L180/12 SCOSH-1558535 Accessories Flat gasket-SACC-PG9-SEAL CLM-1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 08/24/2020Page10/10