
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803
Website: http: //www.microsemi.com
LDS-0154 Rev. 1 (100198) Page 2 of 2
PACKAGE DIMENSIONS
FIGURE 1: Physical dimensions diode: TYPE 1N4500
DESIGN DATA
Case: Hermetically sealed glass package per MIL-PRF-19500/403. DO-35 outline.
Lead Material: Copper clad steel
Lead Finish: Tin / Lead
Marking: 70°C/W maximum
Polarity: Cathode end is banded.
NOTES:
1. Metric equivalents (to the nearest .01mm) are
give for general information only and are based
upon 1 inch = 25.4mm.
2. Both leads shall be within the specified limits
(see 3.3.1).
3. The maximum diameter of dimension B shall
apply for dimension A.
4. The minimum diameter for dimension B shall
apply over at least .075 (1.91mm) of dimension
A.
5. The specified lead diameter applies in the zone
between .050 (1.27mm) and 1.00 (25.4mm)
from the diode body to the end of the lead.
Outside of this zone the lead diameter shall not
exceed diameter B.
Dimensions
Inches Millimeters
Note
Ltr Min Max Min Max
A .160 4.06
B .075 1.99 3, 4
C 1.000 1.500 25.40 38.10 2
D .018 .022 .46 .56 5, 2