BCP5116TC - DIODES Incorporated

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

1 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

PNP MEDIUM POWER TRANSISTORS IN SOT223

Features

• BVCEO > -45V, -60V & -80V

• I

C = -1A High Continuous Collector Current

• I

CM = -2A Peak Pulse Current

• 2W Power Dissipation

• Low Saturation Voltage VCE(sat) < -500mV @ -0.5A

• Gain Groups 10 and 16

• Complementary NPN types: BCP54, 55 and 56

• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)

• Halogen and Antimony Free. “Green” Device (Note 3)

• Qualified to AEC-Q101 Standards for High Reliability

• PPAP Capable (Note 4)

Mechanical Data

• Case: SOT223

• Case Material: Molded Plastic. “Green” Molding Compound.

• UL Flammability Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020

• Terminals: Finish - Matte Tin Plated Leads, Solderable per

MIL-STD-202, Method 208

• Weight: 0.112 grams (approximate)

Applications

• Medium Power Switching or Amplification Applications

• AF Driver and Output Stages

Ordering Information (Notes 4 & 5)

Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel

BCP51TA AEC-Q101 BCP 51 7 12 1,000

BCP5110TA AEC-Q101 BCP 5110 7 12 1,000

BCP5116TA AEC-Q101 BCP 5116 7 12 1,000

BCP5116TC AEC-Q101 BCP 5116 13 12 4,000

BCP52TA AEC-Q101 BCP 52 7 12 1,000

BCP5210TA AEC-Q101 BCP 5210 7 12 1,000

BCP5216TA AEC-Q101 BCP 5216 7 12 1,000

BCP53TA AEC-Q101 BCP 53 7 12 1,000

BCP53QTA Automotive BCP 53 7 12 1,000

BCP5310TA AEC-Q101 BCP 5310 7 12 1,000

BCP5316TA AEC-Q101 BCP 5316 7 12 1,000

BCP5316TC AEC-Q101 BCP 5316 13 12 4,000

Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.

2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.

3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and

<1000ppm antimony compounds.

4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally

the same, except where specified.

5. For packaging details, go to our website at http://www.diodes.com

Marking Information

BCP = Product Type Marking Code, Line 1.

xxxx = Product Type Marking Code, Line 2 as follows:

BCP51 = 51 BCP52 = 52 BCP53 = 53

BCP5110 = 5110 BCP5210 = 5210 BCP5310 = 5310

BCP5116 = 5116 BCP5216 = 5216 BCP5316 = 5316

Top View Device Symbol

SOT223

xxxx

BCP

Top View

Pin-Out

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

2 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

Maximum Ratings (@TA = +25°C, unless otherwise specified.)

Characteristic Symbol BCP51 BCP52 BCP53 Unit

Collector-Base Voltage VCBO -45 -60 -100 V

Collector-Emitter Voltage VCEO -45 -60 -80 V

Emitter-Base Voltage VEBO -5 V

Continuous Collector Current IC -1 A

Peak Pulse Collector Current ICM -2

Continuous Base Current IB -100 mA

Peak Pulse Base Current IBM -200

Thermal Characteristics (@TA = +25°C, unless otherwise specified.)

Characteristic Symbol Value Unit

Power Dissipation (Note 6) PD 2 W

Thermal Resistance, Junction to Ambient (Note 6) RθJA 62 °C/W

Thermal Resistance, Junction to Leads (Note 7) RθJL 19.4 °C/W

Operating and Storage Temperature Range TJ, TSTG -65 to +150 °C

ESD Ratings (Note 8)

Characteristic Symbol Value Unit JEDEC Class

Electrostatic Discharge - Human Body Model ESD HBM ≥ 4,000 V 3A

Electrostatic Discharge - Machine Model ESD MM ≥ 400 V C

Notes: 6. For a device surface mounted on 50mm X 50mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; device measured when

operating in steady state condition.

7. Thermal resistance from junction to solder-point (at the end of the collector lead).

8. Refer to JEDEC specification JESD22-A114 and JESD22-A115.

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

3 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

Thermal Characteristics and Derating Information

100µ 1m 10m 100m 1 10 100 1k

100

120

140

160

0 20 40 60 80 100 120 140 160

0.0

0.5

1.0

1.5

2.0 50mm x 50mm

1oz Cu

Derating Curve

Temperature (°C)

Max Power Dissipation (W)

100µ 1m 10m 100m 1 10 100 1k

60 50mm x 50mm 1oz Cu

Tamb = 25°C

Pulse Power Dissipation

Pulse Width (s)

Transient Thermal Impedance

D=0.5

D=0.2

D=0.1

Single Pulse

D=0.05

Thermal Resistance (°C/W)

Pulse Width (s)

50mm x 50mm 1oz Cu

Tamb = 25°C

Single pulse

Maximum Power (W)

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

4 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

Electrical Characteristics (@TA = +25°C, unless otherwise specified.)

Characteristic Symbol Min Typ Max Unit Test Condition

Collector-Base

Breakdown Voltage

BCP51

BVCBO

-45

- - V

IC = -100µA

BCP52 -60

BCP53 -100

Collector-Emitter

Breakdown Voltage (Note 9)

BCP51

BVCEO

-45

- - V

IC = -10mA

BCP52 -60

BCP53 -80

Emitter-Base Breakdown Voltage BVEBO -5 - - V

IE = -10µA

Collector Cut-off Current ICBO - -

-0.1

-20 µA VCB = -30V

VCB = -30V, TA = +150°C

Emitter Cut-off Current IEBO - - -20 nA

VEB = -4V

Static Forward Current Transfer Ratio (Note 9)

All versions

hFE

250

- -

IC = -5mA, VCE = -2V

IC = -150mA, VCE = -2V

IC = -500mA, VCE = -2V

10 gain grp 63 - 160 IC = -150mA, VCE = -2V

16 gain grp 100 - 250 IC = -150mA, VCE = -2V

Collector-Emitter Saturation Voltage (Note 9) VCE

(

sat

)

- - -0.5 V

IC = -500mA, IB = -50mA

Base-Emitter Turn-On Voltage (Note 9) VBE

(

)

- - -1.0 V

IC = -500mA, VCE = -2V

Transition Frequency fT 150 - - MHz

IC = -50mA, VCE = -10V

f = 100MHz

Output Capacitance Cobo - - 25 pF

VCB = -10V, f = 1MHz

Notes: 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%.

0.2

0.4

0.6

0.8

1.0

01 2 3 4 5

-V , COLLECTOR-EMITTER VOLTAGE (V)

LLE

(A)

I = 2mA

I = 4mA

I = 6mA

I = 8mA

I = 10mA

Fig. 1 Typical Collector Current

vs. Collector-Emitter Voltage

100

200

300

400

500

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT (A)

h, D

AIN

Fig. 2 Typical DC Current Gain vs. Collector Current

T = -55°C

T = 25°C

T = 85°C

T = 150°C

V = -5V

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

5 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

0.2

0.4

0.6

0.8

1.0

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT(A)

-V , BASE-EMI

E (V)

BE(ON)

Fig 3 Typical Base-Emitter Turn-On Voltage

vs. Collector Current

T = -55°C

T = 25°C

T = 85°C

T = 150°C

V = -2V

0.1

0.2

0.3

0.4

0.5

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT (A)

-V ,

LLE

-EMI

SATURATION VOLTAGE (V)

CE(SAT)

Fig. 4 Typical Collector-Emitter Saturation Voltage

vs. Collector Current

T = -55°C

T = 25°C

T = 85°C

T = 150°C

0.2

0.4

0.6

0.8

1.0

1.2

0.001 0.01 0.1 1 10

-I , COLLECTOR CURRENT (A)

-V , BASE-EMI

N V

E (V)

BE(SAT)

Fig. 5 Typical Base-Emitter Saturation Voltage

vs. Collector Current

T = -55°C

T = 25°C

T = 85°C

T = 150°C

I / I = 10

100

150

200

250

300

020406080100

-I , COLLECTOR CURRENT (mA)

AIN-BANDWID

Fig. 6 Typical Gain-Bandwidth Product vs. Collector Current

V = -5V

f = 100MHz

100

120

140

160

010 203040

V , REVERSE VOLTAGE (V)

CAPACITANCE(pF)

Fig. 7 Typical Capacitance Characteristics

obo

ibo

f = 1MHz

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

6 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

Package Outline Dimensions

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.

Suggested Pad Layout

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.

SOT223

Dim Min Max Typ

A 1.55 1.65 1.60

A1 0.010 0.15 0.05

b1 2.90 3.10 3.00

b2 0.60 0.80 0.70

C 0.20 0.30 0.25

D 6.45 6.55 6.50

E 3.45 3.55 3.50

E1 6.90 7.10 7.00

e — — 4.60

e1 — — 2.30

L 0.85 1.05 0.95

Q 0.84 0.94 0.89

All Dimensions in mm

Dimensions Value (in mm)

X1 3.3

X2 1.2

Y1 1.6

Y2 1.6

C1 6.4

C2 2.3

BCP 51 / 52 / 53

Datasheet Number: DS35366 Rev. 3 – 2

7 of 7

www.diodes.com

January 2013

BCP 51/ 52/ 53

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the

final and determinative format released by Diodes Incorporated.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.