The Connor Winfield XM-1
series and XM-1T series are
5x7.5mml Surface Mount
Crystals, designed for
applications requiring small
packaged tight tolerance
crystals. The surface mount
package is designed for high-
density mounting and is
optimum for mass production.
1 2
X M - 1 - 0 1 9 . 4 4 M 5 0 / 5 0 / - 1 0 6 0 / 1 6
LOAD CAPACITANCE
TEMPERATURE RANGE
FREQUENCY TOLERANCE
FREQUENCY CALIBRATION
MODEL # AND FREQUENCY
5x7.5MM
SURFACE MOUNT CRYSTAL
AVAILABLE FREQUENCY
TOLERANCES:
±10PPM TO ±100PPM
AVAILABLE TEMPERATURE
RANGES:
-10 TO 60°C
-10 TO 70°C
-20 TO 70°C
-40 TO 85°C
TAPE AND REEL PACKAGING
RoHS COMPLIANT / LEAD FREE
5.0 X 7.5mm CERAMIC SURFACE MOUNT CRYSTAL
XM-1-Series
XM-1T-Series
06 05/04/06
ORDERING INFORMATION
FEATURES
DESCRIPTION
XM1 B5
* 19.44
Xt006
ABSOLUTE MAXIMUM RATINGS TABLE 1.0
PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE
Storage Temperature -40 - 85 °C
ELECTRICAL SPECIFICATIONS TABLE 2.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Frequency Range (Fo) 8 - 100 MHz
Frequency Calibration @ 25°C ±10 - ±100 ppm 1
Frequency Tolerance: ±10 - ±100 ppm 2
Operating Temperature Range -40 - 85 °C 3
Mode
Fundamental or
3rd Overtone
Shunt Capacitance (Co) - - 7.0 pF
Equivalent Series Resistance - See Table 3 - Ohm
Load Capacitance (CL) - See Table 3 - pF 4
Drive Level - - 100 u Watts
Package Height “H” XM-1 - - 0.051” (1.3mm)
XM-1T - - 0.043” (1.1mm)
TABLE 3.0
Frequency Range Mode of Operation E.S.R CL (Note 4)
8 MHz to 9.999 MHz Fundamental 60 Ohms Max. 16 pF
10 MHz to 15.999 MHz Fundamental 50 Ohms Max. 16 pF
16MHz to 32 MHz Fundamental 40 Ohms Max. 16 pF
28 MHz to 83.999 MHz 3rd Overtone 60 Ohms Max. Series
84 MHz to 100 MHz 5th Overtone 80 Ohms Max. Series
Notes
1) Other calibration tolerances are available; please specify calibration in the part number.
2) Tolerances less than +/-100ppm frequency stability is referenced to the frequency measured at 25°C. +/-
100 ppm tolerance is all inclusive of calibration @ 25°C, frequency vs. temperature stability and aging.
±10ppm, ±20ppm, ±30ppm, ±50ppm, ±100ppm, or specify; please specify tolerance in the part number.
3) –10 to 60°C, –10 to 70°C, –20 to 70°C, –40 to 85°C, or specify; please specify the temperature range in
the part number.
4) Series, 16pF, 20pF, 30pF, 32pF, or specify; please specify the load in the part number.
ENVIRONMENTAL CHARACTERISTICS TABLE 4.0
Package Hermetically Sealed Ceramic Package.
Aging (First year maximum) +/-5ppm
Shock Resistance (Maximum) +/-5ppm
Test standard: free drop onto a hard wooden board from a height
of 75cm, 3 times.
Vibration Resistance (Maximum) +/-5ppm
Test standard: Frequency from 10 to 500 Hz, amplitude at 1.5mm
or 10G which ever is smaller each plane X, Y and Z.
Insulation Resistance (Minimum) 500 M ohm minimum at 100 +/-15 Vdc.
Leakage 0.01ppm atm. cc/sec. maximum
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
HTTP://WWW.CONWIN.COM P R O D U C T D A T A S H E E T
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL
Package Outline Suggested Pad Layout
Pin Connections
Tape and Reel Diagram
Reflow Profiles
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
HTTP://WWW.CONWIN.COM P R O D U C T D A T A S H E E T
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL
XM1 B5
19.44
XM1 B5
19.44
TABLE 5.0
Pin Connection
1 Crystal Connection
2 Case Ground
3 Crystal Connection
4 Case Ground
Marking:
Xm1 = XM-1
B5 = Date Code
19.44 = 19.44 MHz
Xt006 1 2 06 05/04/06
