New Product
3KBP005M thru 3KBP08M
Vishay General Semiconductor
Document Number: 88888
Revision: 15-Apr-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
Glass Passivated Single-Phase Bridge Rectifier
FEATURES
UL recognition file number E54214
Ideal for printed circuit board
High surge current capability
High case dielectric strength
Solder dip 260 °C, 40 s
Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
General purpose use in ac-to-dc bridge full wave
rectification for switching power supply, home
appliances, office equipment, and telecommunication
applications.
MECHANICAL DATA
Case: KBPM
Epoxy meets UL 94V-0 flammability rating
Terminals: Silver plated leads, solderable per
J-STD-002 and JESD22-B102
E4 suffix for consumer grade
Polarity: As marked on body
e4
PRIMARY CHARACTERISTICS
IF(AV) 3 A
VRRM 50 V to 800 V
IFSM 80 A
IR5 µA
VF1.05 V
TJ max. 150 °C
Case Style KBPM
+~~−
+
~
~
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL 3KBP
005M
3KBP
01M
3KBP
02M
3KBP
04M
3KBP
06M
3KBP
08M UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 V
Maximum average forward output rectified current
at TA = 55 °C (Fig. 1) IF(AV) 3.0 A
Peak forward surge current 50 Hz single half
sine-wave superimposed on rated load IFSM 80 A
Rating for fusing (t < 10 ms) I2t 32 A2s
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
New Product
3KBP005M thru 3KBP08M
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88888
Revision: 15-Apr-08
2
Note:
(1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x 12 mm) copper pads
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST
CONDITIONS SYMBOL 3KBP
005M
3KBP
01M
3KBP
02M
3KBP
04M
3KBP
06M
3KBP
08M UNIT
Maximum instantaneous forward
voltage drop per diode 3.0 A VF 1.05 V
Maximum DC reverse current
at rated DC blocking voltage
per diode
TA = 25 °C
TA = 125 °C IR 5.0
500 µA
Typical junction capacitance
per diode 4.0 V, 1 MHz CJ25 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL 3KBP
005M
3KBP
01M
3KBP
02M
3KBP
04M
3KBP
06M
3KBP
08M UNIT
Typical thermal resistance (1) RθJA
RθJL
30
11 °C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
3KBP06M-E4/45 1.912 45 30 Tube
3KBP06M-E4/51 1.912 51 600 Anti-static PVC tray
Figure 1. Forward Current Derating Curve
020 40 60 80100 120 140 160
0
1
2
3
4
60 Hz
Resistive or
Inductive Load
With Heat Sink
Without Heat Sink
Heat Sink Mounting:
3.0 x 3.0 x 0.11" Thick
(7.5 x 7.5 x 0.3 cm) Al. Plate
Ambient Temperature (°C)
Average Forward Current (A)
Figure 2. Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
110 100
0
20
40
60
80
100
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
New Product
3KBP005M thru 3KBP08M
Vishay General Semiconductor
Document Number: 88888
Revision: 15-Apr-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 3. Typical Forward Characteristics Per Diode
Figure 4. Typical Reverse Leakage Characteristics Per Diode
0.5
0.4 0.6 0.8 1.0 1.2
1.1
0.01
0.1
1
10
0.7 0.9
T
J
= 150 °C
T
J
= 125 °C
T
J
= 25 °C
Instantaneous Forward Volta
g
e (V)
Instantaneous Forward Current (A)
10 20 40 60 80100
0.01
0.1
1
10
100
30 50 70 90
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
T
J
= 150 °C
T
J
= 125 °C
T
J
= 25 °C
Figure 5. Typical Junction Capacitance Per Diode
0.1 110 100
1
10
100
Reverse Voltage (V)
Junction Capacitance (pF)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Polarity shown on front side of case: positive lead by beveled corner
0.125 x 45°
(3.2)
0.600 (15.24)
0.560 (14.22)
0.034 (0.86)
0.028(0.76)
0.105 (2.67)
0.085 (2.16)
0.160 (4.1)
0.140 (3.6)
0.060
(1.52)
0.460 (11.68)
0.50 (12.7) MIN.
0.420 (10.67)
0.500 (12.70)
0.460 (11.68)
0.60
(15.2)
MIN.
DIA.
0.200 (5.08)
0.180 (4.57)
Case Style KBPM
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.