LUCKY LIGHT
LUCKY LIGHTLUCKY LIGHT
LUCKY LIGHT
Part No.
Part No.Part No.
Part No. LL-304AD3B-001
LL-304AD3B-001LL-304AD3B-001
LL-304AD3B-001 Spec No.
Spec No.Spec No.
Spec No. S/N-0
S/N-0S/N-0
S/N-01042106D
1042106D1042106D
1042106D Page
PagePage
Page 2
of
ofof
of
4
Features
♦ S tandard T-1 diameter package
♦ Wide viewing angle
♦ General purpose leads
♦ Reliable and rugg ed
Package Dimension:
Part NO. Lens C olor Source C olor
LL-304AD3B- 001 Orange Diffused Am ber
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2 5(. 01 0”)m m unless otherwi se no te d.
3. Protru ded resi n under flan ge is 1.0mm( .04”) max
4. Lead spacing is measured where the leads emerge from the package.
5. Specifications are subject to change without notice
LUCKY LIGHT
LUCKY LIGHTLUCKY LIGHT
LUCKY LIGHT
Part No.
Part No.Part No.
Part No. LL-304AD3B-001
LL-304AD3B-001LL-304AD3B-001
LL-304AD3B-001 Spec No.
Spec No.Spec No.
Spec No. S/N-0
S/N-0S/N-0
S/N-01042106D
1042106D1042106D
1042106D Page
PagePage
Page 3
of
ofof
of
4
Absolute Maximum Ratings at Ta=25℃
℃℃
℃
Parameter MAX. Unit
Power Dissipation 100 mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA
Continuous Forward Current 35 mA
Derating Linear From 50℃0.4 mA/℃
Reverse Voltage 5 V
Operating Temperature Range -40℃ to +80℃
Storage Temperature Range -40℃ to +80℃
Lead Soldering Temperature
[4mm(.157”) From Body] 260℃ for 5 Seconds
Electrical Optical Charact erist ics at Ta=25℃
℃℃
℃
Parameter Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity Iv --- 144 --- mcd IF=20mA (Note 1)
Viewing Angle 2θ1/2 --- 40 --- Deg (Note 2)
Peak Emission Wavelength λp--- 612 --- nm IF=20mA
Dominant Wavelength λd-- 606 --- nm IF=20mA (Note 3)
Spectral Line Half-Width △λ --- 38 --- nm IF=20mA
Forward Voltage VF--- 1.9 2.5 V IF=20mA
Reverse Current IR--- --- 100 µAV
R=5V
Note:
Note:Note:
Note:
1. Luminous intensity is measured with a light sensor and filter combination that
approximates the CIE eye-response curve.
2. θ1/2
is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3.
3.3.
3.
The dominant wavelength (λd) is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
LUCKY LIGHT
LUCKY LIGHTLUCKY LIGHT
LUCKY LIGHT
Part No.
Part No.Part No.
Part No. LL-304AD3B-001
LL-304AD3B-001LL-304AD3B-001
LL-304AD3B-001 Spec No.
Spec No.Spec No.
Spec No. S/N-0
S/N-0S/N-0
S/N-01042106D
1042106D1042106D
1042106D Page
PagePage
Page 4
of
ofof
of
4
Typical Electrical / Optical Characteristics Curves
Typical Electrical / Optical Characteristics CurvesTypical Electrical / Optical Characteristics Curves
Typical Electrical / Optical Characteristics Curves
(25
2525
25℃
℃℃
℃ Ambient Temperature Unless Otherwise Noted)
Ambient Temperature Unless Otherwise Noted) Ambient Temperature Unless Otherwise Noted)
Ambient Temperature Unless Otherwise Noted)
Beam Pattern
-90°
-60°
-30°
0°
30°
60°
90°
0.20.40.60.81.00.40.60.81.0 0.2
Relative Intensity (LOP@MAX=1)
Spectral Rad iance (Peak @ 612nm )
0.0
0.2
0.4
0.6
0.8
1.0
380 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 720 740 760 780
W ave Le ngth(nm )
Normalized
Response
Forward Current
vs Forward Voltage
0
5
10
15
20
25
30
35
1.5 1.7 1.9 2.1 2.3 2.5
Forw ar d Voltage VF(V)
Forward Current
IF(mA)
R e la tive L u min ou s In t e ns ity
vs Forward C urrent
0
0.5
1
1.5
2
2.5
3
0 5 10 15 20 25 30 35
Forward C urren t IF(mA)
Relative Intensity
(LOP@20mA=1)
