Condor
Todd Power
Hot Swap and Forced Current Sharing Power Supplies
692
b
ALLIED Products Not Cataloged Are Available Ñ Call 1-800-433-5700 For Price And Delivery
TMX and RMX series power supplies can be operated in redundant configurations to achieve AC operation with battery backup capability.
RMX Series Ñ 350 W, AC Multiple Output Power Supplies
c
350 W
c
Power Factor Corrected
c
Multiple Output, Hot Swappable
RMX series 350 W power supplies provide new and increased flexibility for configuring connector interface. Redundant Òhot swappableÓ power systems using a
standard product. The RMX-350 series eliminates the need for external sheet metal sleds, OR-ing diodes, and a high current interface. These switching power
supplies are power factor corrected, multiple-output units which contain built-in Schottky OR-ing diodes and a high current. Weight: 3.5 lbs. AC Input: 90-264 VAC
continuous range, 47 to 63 Hz. Internally fused for 7 A. Power Factor: 0.99 typical at full load, meets EN61000-3-2. Inrush: Cold start AC current is less than 30 A at
115 VAC and 60 A at 230 VAC, limited by thermistor. Brownout Protection: Holds regulation to 85 VAC. Holdup Time: 20 ms minimum after removal of power at full
load. Efficiency: 70% typical. AC Power Fail: Provides TTL Ò0Ó 5 ms before output voltage goes out of regulation band upon loss of AC power.
744-8451 RMX-353-0512 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A Ñ 571.20
744-8453 RMX-354-1205 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A 5.2 V @ 5 A 571.20
744-8455 RMX-354-1212 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A 12.0 V @ 5 A 571.20
744-8457 RMX-354-1224 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A 24.0 V @ 3 A 571.20
744-8459 RMX-354-1512 350 +5 V @ 50 A +15 V @ 4 A Ð15 V @ 4 A 12.0 V @ 5 A 571.20
744-8461 RMX-354-1524 350 +5 V @ 50 A +15 V @ 4 A Ð15 V @ 4 A 24.0 V @ 3 A 571.20
TMX Series Ñ 350 W, DC Multiple Output Power Supplies
c
350 W
c
Multiple Output
c
48 VDC Input, Hot Swappable
TMX series power supplies are designed to meet applicable Bellcore and NEBS standards, so they are readily operated from central office power (48 VDC). They are
DC clones of CondorÕs RMX series power supplies. The RMX and TMX power supplies are directly interchangeable. They allow you to operate existing systems from
AC or DC power without compromising performance or making any mechanical changes for mounting and cooling. Weight: 3.8 lbs. DC Input: 40-60 VDC, internally
fused for 15 A. Efficiency: 75% typical. Low Input: Provides TTL Ò0Ó when input is below 40 VDC.
744-8405 TMX-353-0512 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A Ñ 571.20
744-8407 TMX-354-1205 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A 5.2 V @ 5 A 571.20
744-8409 TMX-354-1212 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A 12.0 V @ 5 A 571.20
744-8411 TMX-354-1224 350 +5 V @ 50 A +12 V @ 8/12 A pk Ð12 V @ 4 A 24.0 V @ 3 A 571.20
744-8413 TMX-354-1512 350 +5 V @ 50 A +15 V @ 4 A Ð15 V @ 4 A 12.0 V @ 5 A 571.20
744-8415 TMX-354-1524 350 +5 V @ 50 A +15 V @ 4 A Ð15 V @ 4 A 24.0 V @ 3 A 571.20
Stock Mfr.Õs Power Output Output Output Output
No. Type (Watts) 1 2 3 4
EACH
1-4
RMX-350 AC Input (90-264 VAC Continuous Range)
Function 115 VAC 230 VAC Connector
J1-21 Line Line 1 See DC Output
J1-23 Neutral Line 2
J1-25 Safety Ground Safety Ground
TMX-350 DC Input (40-60 VAC)
Function 48 VDC Connector
J1-22 +48 VDC See DC Output
J1-24 Ð48 VDC
J1-11 Safety Ground
DC Output
Function Location Notes Connector
Output 1 J1-10, 20, 30 Main Output Positronics#
J1-9, 19, 29 Rtn (Common) PLC30M400A1-168.3
Output 2 J1-2 Rtn (Common) Mates with panel
J1-3 Mounted
Output 3 J1-4 Rtn (Common) PLC30F1000
J1-3 Connector using
Output 4 J1-5 (+) Floating Crimp contacts
Output FC114N2
J1-6 (Ð) Floating Output (14 to 16 AWG)
Status and Control
Function Location Notes Connector
Remote Sense J1-18 Output 1 Sense See DC Output
Remote Sense J1-8 Output 1 Sense Rtn
DC Power Good J1-7 Reference to Common
when Output 1 Sense
Rtn is terminated
Enable J1-16 Reference to Common
Inhibit J1-27 Reference to Common
AC Power Fail J1-17 Reference to Common
Power Factor Corrected,
Single Output, Forced
Current Sharing Power Supplies
c
Forced Current Sharing for N
+1 Redundancy
c
Universal AC Input
c
0.99 Typical Power Factor
c
Low Ripple and Noise
c
DC Power Wood and AC Power
Fail Signals
c
True Remote Inhibit
c
Monotonic Turn-On and Turn-
Off
500 Watts
Stock Mfr.Õs Output Power Dimensions
Volts Watts
No. Type Rating Out Inches
EACH
1-4 5-24
744-0795 SPF-500-12 90-264 500 12 V @ 42.0 A 500 11.00 ´5 ´2.50 531.31 495.00
744-0835 SPF-500-15 90-264 500 15 V @ 34.0 A 500 11.00 ´5 ´2.50 531.31 495.00
744-0875 SPF-500-24 90-264 500 24 V @ 21.0 A 500 11.00 ´5 ´2.50 531.31 495.00
744-0910 SPF-500-28 90-264 500 28 V @ 18.0 A 500 11.00 ´5 ´2.50 531.31 495.00
744-0955 SPF-500-48 90-264 500 48 V @ 10.4 A 500 11.00 ´5 ´2.50 531.31 495.00
750 Watts
744-0800 SPF-750-12 90-264 750 12 V @ 62.0 A 750 12.92 ´5 ´2.50 855.58 796.17
744-0840 SPF-750-15 90-264 750 15 V @ 50.0 A 750 12.92 ´5 ´2.50 855.58 796.17
744-0880 SPF-750-24 90-264 750 24 V @ 31.0 A 750 12.92 ´5 ´2.50 855.58 796.17
744-0915 SPF-750-28 90-264 750 28 V @ 27.0 A 750 12.92 ´5 ´2.50 855.58 796.17
744-0960 SPF-750-48 90-264 750 48 V @ 16.0 A 750 12.92 ´5 ´2.50 855.58 796.17
1000 Watts
744-0885 SPF-1000-24 90-264 1000 24 V @ 42.0 A 1000 12.00 ´8 ´3.38 1208.78 1134.92
744-0920 SPF-1000-28 90-264 1000 28 V @ 36.0 A 1000 12.00 ´8 ´3.38 1208.78 1135.00
744-0965 SPF-1000-48 90-264 1000 48 V @ 21.0 A 1000 12.00 ´8 ´3.38 1208.78 1135.00
350 W, AC and DC Multiple Output Hot Swap Power Supplies
Features
c
Diode Isolated Outputs for Hot Swap
c
ÒZero WireÓ Slope Program Current Sharing for Redundancy
c
Self-Aligning Connector with Solid Metal Machined Contacts
c
Universal AC Input or 48 VDC Input
c
Dual Converter Design Eliminates Interaction Between Logic and
Auxiliary Outputs
c
0.99 Typical Power Factor
c
Low Ripple and Noise on All Outputs
c
DC Power Good and AC Power Fail Signals
c
True Remote Inhibit
c
Monotonic Turn-On and Turn-Off
Specifications
Overall Dimensions: 10.75" ´4.8" ´2.5".
Adjustability: Outputs 1 and 2, and 4 factory adjusted to nominal ±0.2%,
output 3 tracks #2, initial accuracy ±3%.
Line and Load Reg: Outputs 1, 2 and 4 hold ±2% over AC input range and 0 to
100% load change (preprogrammed slope). Output #3 requires 20%
minimum load on Outputs 2 and 3 to hold ±5%.
Ripple and Noise: 1% p-p or 100 mV, whichever is greater.
Remote Sense (Output #1): Compensates for 250 mV total line drop.
Preprogrammed slope remains under ±3% worst case. Open sense
lead protection.
Temperature Coefficient (Outputs 1, 2 and 4): 0.03% per degree C.
Stability: 0.1% over 8 hours after 30 minutes warm-up.
Transient Response (Outputs 1, 2 and 4): Output voltage returns to within 1%
in less than 500 µs for a 50% load change (measured with rise time
and fall time of 200µs). Peak transient does not exceed 5%.
Overload Protection: All outputs are protected against overload and short
circuit. Automatic recovery upon removal of fault.
Overvoltage Protection (Outputs 1 and 2): Protects load against power supply
induced over voltage. Trip point is factory set so that output voltage
cannot exceed 136% of nominal.
Specifications (continued)
Peak Output Current: Dual current ratings define continuous and peak
currents. The peak current shown can be delivered for a maximum
period of 30 seconds.
Remote Enable: Contact closure to common turns on DC outputs (recessed
pin for make last, break firstÓ connection).
Remote Inhibit: Contact closure to the negative sense line or a TTL level Ò0Ó
turns off DC outputs.
DC Power Good: Provides a TTL Ò1Ó open collector when output 1 is above 4.6
nominal.
Redundancy: Built-in Or-ing diodes, slope program current sharing on all
outputs, and self aligning connector provide Òhot swapÓ and ÒN+1Ó
capabilities. Current sharing remains within 10% of the unitÕs full
output rating while units are in thermal equilibrium.
Reverse Voltage: Protected against reverse voltage up to supply current rating.
Thermal Protection: Shuts down power supply if overheated. Automatic
recovery.
Temperature Range: 0-50¡C to full ratings. Most models are approved to
UL1950; CSA 22.2 #234; IEC 950 and TV, EN60950, Class 1 SELV.
CE 72/23/EEC/93/68EEC.
12
